daohang fenxiangbox searchbox qikanlogonew daohangnew searchboxnew navrightzone footerzone paper

High-Efficiency Photodetector Based on a CVD-Grown WS2 Monolayer High-Efficiency Photodetector Based on a CVD-Grown WS2 Monolayer AITranslate

Birla Institute of Technology Mesra; Indian Institute of Technology Guwahati; Indian Institute of Technology Guwahati; Ulsan National Institute of Science and Technology (UNIST); Birla Institute of Technology Mesra
AITranslate
Publisher: ACS
Share Citation Information Add to Favorites

    Scan to share on WeChat or Moments

Use WeChat scan.
Share with WeChat friends or Moments

Abstract AITranslate

Future generation technologies demand high efficiency photodetectors to enable sensing and switching devices for ultrafast communication and machine vision. This requires direct-band gap materials with high photosensitivity, high detectivity, and high quantum efficiency. Monolayered two-dimensional-semiconductor-based photodetectors are the most promising materials for such applications, although experimental realization has been limited due to the unavailability of a high-quality sample. In the current paper, we report about a WS2-based photodetector having a sensitivity of 290 A W–1 upon 405 nm excitation and an incident power density as low as 0.06 mW/cm2. The fabricated device shows a detectivity of 52 × 1014 with an external quantum efficiency of 89 × 103 %. The observed superior photoresponse parameters of the CVD-grown WS2-based photodetector as compared to Si-detectors establish its capability to replace the Si-photodetectors with monolayered ultrathin device having superior performance parameters.

KeyWords AITranslate

monolayer tungsten disulfide 2dimensional growth CVD high photosensitivity photodetectors
No data

Basic Information:

DOI:https://doi.org/10.1021/acsaelm.3c00366

Chinese Library Classification Number:

Citation Information:

Future generation technologies demand high efficiency photodetectors to enable sensing and switching devices for ultrafast communication and machine vision. This requires direct-band gap materials with high photosensitivity, high detectivity, and high quantum efficiency. Monolayered two-dimensional-semiconductor-based photodetectors are the most promising materials for such applications, although experimental realization has been limited due to the unavailability of a high-quality sample. In the current paper, we report about a WS2-based photodetector having a sensitivity of 290 A W–1 upon 405 nm excitation and an incident power density as low as 0.06 mW/cm2. The fabricated device shows a detectivity of 52 × 1014 with an external quantum efficiency of 89 × 103 %. The observed superior photoresponse parameters of the CVD-grown WS2-based photodetector as compared to Si-detectors establish its capability to replace the Si-photodetectors with monolayered ultrathin device having superior performance parameters.

quote

GB/T 7714-2015 [1] Rakesh K. Prasad, Koushik Ghosh, Pravat K. Giri, et al. ACS Applied Electronic Materials, 2023(5). DOI:10.1021/acsaelm.3c00366.
MLA [1] Rakesh K. Prasad, et al., ACS Applied Electronic Materials, no. 5, 2023, https://doi.org/10.1021/acsaelm.3c00366.
APA [1] Rakesh K. Prasad, Koushik Ghosh, Pravat K. Giri, DaiSik Kim, & Dilip K. Singh. (2023). ACS Applied Electronic Materials(5). https://doi.org/10.1021/acsaelm.3c00366
IEEE [1] Rakesh K. Prasad, Koushik Ghosh, Pravat K. Giri, DaiSik Kim, and Dilip K. Singh, ACS Applied Electronic Materials, no. 5, 2023, doi: 10.1021/acsaelm.3c00366. keywords: {monolayer tungsten disulfide 2dimensional growth CVD high photosensitivity photodetectors}