daohang fenxiangbox searchbox qikanlogonew daohangnew searchboxnew navrightzone footerzone paper

Effect of Urea Links in the Backbone of Polyimide Aerogels AITranslate

University Space Research Association;University Space Research Association;NASA Glenn Research Center, 21000 Brookpark Road;University of Akron;University of Akron;University Space Research Association
AITranslate
Publisher: ACS
Share Citation Information Add to Favorites

    Scan to share on WeChat or Moments

Use WeChat scan.
Share with WeChat friends or Moments

Abstract AITranslate

Flexible, conformal polyimide (PI) aerogels with low density, good mechanical properties, and high surface areas have attracted much attention for many potential applications such as lightweight antenna substrates, insulating materials for launch vehicles, inflatable structures, aircraft, or space suits. Development and improvements to the fabrication of polyimide aerogel thin films have been reported over the last decade to meet the needs of many of these applications. However, most starting materials are expensive. In this research, we utilized commercially available, low-cost monomers including 4,4′-bis(4-aminophenoxy)propane (BAPP) and 3,3′,4,4′-benzophenone tetracarboxylic dianhydride (BTDA), and 4,4-methylene diphenyl diisocyanate (MDI) in fabricating polyimide (PI) and poly(imide-urea) (PIU), which were then cross-linked with 1,3,5-tris(4-aminophenoxy)benzene (TAB). It was found that the addition of MDI into the PI chains not only maintained the flexibility of the aerogel films but also enhanced the film casting, allowing the production on pilot scale. With the capability of producing robust films at affordable cost, the application of the PIU aerogel films can be expanded to terrestrial goods such as winter clothing, or pipe wrapping, etc. In addition, the presence of only a small addition of the urea links in the polyimide chains in PIU aerogels led to lower shrinkage when compared to the corresponding PI aerogels, leading to lower density.

KeyWords AITranslate

aerogels polyimides poly(imideurea) diisocyanate hybrid materials flexible films thermal stability
No data

Basic Information:

DOI:https://doi.org/10.1021/acsapm.1c00085

Chinese Library Classification Number:

Citation Information:

Flexible, conformal polyimide (PI) aerogels with low density, good mechanical properties, and high surface areas have attracted much attention for many potential applications such as lightweight antenna substrates, insulating materials for launch vehicles, inflatable structures, aircraft, or space suits. Development and improvements to the fabrication of polyimide aerogel thin films have been reported over the last decade to meet the needs of many of these applications. However, most starting materials are expensive. In this research, we utilized commercially available, low-cost monomers including 4,4′-bis(4-aminophenoxy)propane (BAPP) and 3,3′,4,4′-benzophenone tetracarboxylic dianhydride (BTDA), and 4,4-methylene diphenyl diisocyanate (MDI) in fabricating polyimide (PI) and poly(imide-urea) (PIU), which were then cross-linked with 1,3,5-tris(4-aminophenoxy)benzene (TAB). It was found that the addition of MDI into the PI chains not only maintained the flexibility of the aerogel films but also enhanced the film casting, allowing the production on pilot scale. With the capability of producing robust films at affordable cost, the application of the PIU aerogel films can be expanded to terrestrial goods such as winter clothing, or pipe wrapping, etc. In addition, the presence of only a small addition of the urea links in the polyimide chains in PIU aerogels led to lower shrinkage when compared to the corresponding PI aerogels, leading to lower density.

quote

GB/T 7714-2015 [1] Baochau N. Nguyen, Daniel A. Scheiman, Mary Ann B. Meador, et al. ACS Applied Polymer Materials, 2021(3). DOI:10.1021/acsapm.1c00085.
MLA [1] Baochau N. Nguyen, et al., ACS Applied Polymer Materials, no. 3, 2021, https://doi.org/10.1021/acsapm.1c00085.
APA [1] Baochau N. Nguyen, Daniel A. Scheiman, Mary Ann B. Meador, Jiao Guo, Bart Hamilton, & Linda S. McCorkle. (2021). ACS Applied Polymer Materials(3). https://doi.org/10.1021/acsapm.1c00085
IEEE [1] Baochau N. Nguyen, Daniel A. Scheiman, Mary Ann B. Meador, Jiao Guo, Bart Hamilton, and Linda S. McCorkle, ACS Applied Polymer Materials, no. 3, 2021, doi: 10.1021/acsapm.1c00085. keywords: {aerogels;polyimides;poly(imideurea);diisocyanate;hybrid materials;flexible films;thermal stability}