Effects of Yttrium on the Microstructure of Mg-5.5Al Alloy AITranslate
Abstract AITranslate
The effects of yttrium on the microstructure of Mg-5.5Al alloy were investigated.The results show that adding yttrium can dramatically refine the crystalline grains of Mg-5.5Al alloy,where punctate Al2Y appears in the matrix.When the dosage of yttrium is 1.2%（mass fraction）,the average grain size is refined to 171 μm from 333 μm.However,once the dosage is over 1.2%,Al2Y phase gradually segregates and grow up,and therefore the effect of grain refinement is reduced.
KeyWords AITranslate
1Brown R Z. International magnesium association 55th annual world conference[J]. Light Metal Age, 1998,56 (7- 8) :86-93.
2Michael M Avedesian. Magnesium and Magnesium Alloys[M]. Ohio : Materials Park, 2000.
3杨明波,潘复生,张静.Mg-Al系耐热镁合金的开发及应用[J].铸造技术,2005,26(4):331-335. 被引量：42
4裴利霞,张金山,高义斌,许春香,韩富银,王红霞,赵兴国,梁伟.稀土元素镧对AZ91镁合金显微组织及硬度的影响[J].铸造设备研究,2005(1):20-22. 被引量：35
5杨重愚.轻金属冶金学[M].北京:冶金工业出版社,2002.
6Zou Honghui, Zeng Xiaoqin, Zhai Chunquan, et al. The effects of yttrium element on microstructure and mechanical properties of Mg-5wt%Zn-2wt% A1 alloy[J]. Materials Science and Engineering A, 2005, 402:142- 146.
7Shakhshir S, Medraj M. Computational thermodynamic model :for the Mg-AL-Y system[J]. Journal of Phase Equilibria and Diffusion,2006,27(3) :231-244.
1张兴渊,李长青,李全安,张清.Ca对Mg-5.5Al-1.2Y镁合金显微组织和力学性能的影响[J].热加工工艺,2012,41(2):24-27. 被引量：4
2黄文先,闫洪.高能超声与稀土钇复合作用对AZ91铸态组织的影响[J].稀有金属材料与工程,2013,42(11):2346-2350. 被引量：7
3华群,陈建荣,易平波,魏嘉麒,余兴强.耐热镁合金的研究现状及发展前景[J].南方农机,2018,49(23):49-49. 被引量：3
1马斌,王建利,郭永春,张楠,白海燕,孙明月,程柳.Ca含量对Mg-Ca合金组织与力学性能的影响[J].热加工工艺,2014,43(6):4-8. 被引量：7
2黄文先,闫洪.Preparation and theoretic study of semi-solid Al_2Y/AZ91 magnesium matrix composites slurry by ultrasonic vibration[J].稀土学报：英文版,2014,32(6):573-579. 被引量：9
3杨晓敏,侯华,赵宇宏,韩培德.压力下Mg-Al-Ca合金中Al_2Ca相结构、弹性及电子性能的第一原理研究[J].热加工工艺,2014,43(22):50-52. 被引量：1
4闫洪,王志伟.Effect of heat treatment on wear properties of extruded AZ91 alloy treated with yttrium[J].稀土学报：英文版,2016,34(3):308-314. 被引量：6
5程琼,姚昭.热处理工艺对含钇W18Cr4V钢钻头性能的影响分析[J].钢铁钒钛,2016,37(5):60-64.
6周维,邓鹏,胡鹏鹤,张云波,张磊.超声处理对Mg-Zn-Y合金组织和性能的影响[J].特种铸造及有色合金,2016,36(10):1096-1099. 被引量：2
7孔琳琳,李晓华.高能超声对体育器材用铸态铝-镁合金组织与性能的影响[J].轻合金加工技术,2017,45(1):10-13. 被引量：1
8熊俊杰,闫洪.Al-Ti体系原位合成Al_3Ti/ADC12复合材料[J].材料工程,2017,45(8):30-37. 被引量：1
9肖然,刘文才,吴国华,茆继美,王先飞,李中权,刘保良,丁文江.Ce元素含量和铸造方法对AZ91-2Ca合金微观组织与力学性能的影响[J].上海航天,2019,36(2):45-53. 被引量：1
10舒辉,吴林丽,罗洪杰,张旻,刘军.真空铝热还原一步法制取镁钙合金的实验研究[J].真空科学与技术学报,2019,39(5):434-440. 被引量：2
1高维林,于淑娴,王占学.16Mn钢控制轧制中铁素体晶粒直径的数学模型[J].东北工学院学报,1989,10(4):377-381.
2张虹,赵宝忠.合金元素与冷却速度对钢凝固时奥氏体晶粒直径的影响[J].湘钢译丛,1989(1):92-93.
3宋晓杰,李全安,陈雷雷.Y,Gd稀土元素对AZ61镁合金显微结构和力学性能的影响[J].铸造技术,2014,35(6):1124-1126. 被引量：1
4谢卫东,宁旭,王春光,彭晓东.Sr,Y对AZ31镁合金显微组织与力学性能的影响[J].热加工工艺,2011,40(1):13-15. 被引量：9
5吴国华,李冠群,樊昱,丁文江,朱燕萍,李波,王群.Y对AZ91D镁合金组织及力学性能的影响[J].特种铸造及有色合金,2006,26(5):260-263. 被引量：25
6稻叶辉彦,胡泳珍.β晶粒直径和α相析出形态对Ni—15V—3Cr—3Sn—3Al合...[J].国外稀有金属,1991(4):38-42.
7李全安,李建弘,谢建昌,李克杰,张兴渊.含钇Mg-6Al镁合金组织和高温力学性能[J].材料热处理学报,2009,30(3):127-131. 被引量：2
8许娟,李鹏飞,郭锋,高霞.Y对AZ91D镁合金组织和性能的影响[J].热加工工艺,2009,38(16):32-34. 被引量：3
9齐伟光,赵宝荣,许小忠,刘常明.钇对AZ91D镁合金组织和力学性能的影响[J].兵器材料科学与工程,2007,30(2):52-55. 被引量：8
10刘腾,滕新营,周国荣,刘立艳.微量Y、Er元素对AZ91镁合金微观组织及力学性能的影响[J].稀有金属材料与工程,2012,41(11):1940-1944. 被引量：9
Basic Information:
DOI：
Chinese Library Classification Number:TG146.22[金属学及工艺—金属材料]
Citation Information:
The effects of yttrium on the microstructure of Mg-5.5Al alloy were investigated.The results show that adding yttrium can dramatically refine the crystalline grains of Mg-5.5Al alloy,where punctate Al2Y appears in the matrix.When the dosage of yttrium is 1.2%（mass fraction）,the average grain size is refined to 171 μm from 333 μm.However,once the dosage is over 1.2%,Al2Y phase gradually segregates and grow up,and therefore the effect of grain refinement is reduced.
quote
| GB/T 7714-2015 | [1] LI Chang-qing, LI Quan-an, ZHANG Xing-yuan, et al. Effects of Yttrium on the Microstructure of Mg-5.5Al Alloy[J]. Rare Metals and Cemented Carbides, 2010(3): 19-21. |
| MLA | [1] LI Chang-qing, et al., "Effects of Yttrium on the Microstructure of Mg-5.5Al Alloy." Rare Metals and Cemented Carbides, no. 3, 2010, pp. 19-21. |
| APA | [1] LI Chang-qing, LI Quan-an, ZHANG Xing-yuan, & LI Ke-jie. (2010). Effects of Yttrium on the Microstructure of Mg-5.5Al Alloy. Rare Metals and Cemented Carbides(3), 19-21. |
| IEEE | [1] LI Chang-qing, LI Quan-an, ZHANG Xing-yuan, and LI Ke-jie, "Effects of Yttrium on the Microstructure of Mg-5.5Al Alloy," Rare Metals and Cemented Carbides, no. 3, pp. 19-21, 2010. keywords: {yttrium;Mg-5.5Al alloy;Al2Y;microstructure;grain refinement} |