Effects of Doping Methods on Microstructure and Properties of Al_2O_3/Mo Composite Material AITranslate
Abstract AITranslate
Al2O3 was doped into molybdenum powder by solid-solid, liquid-solid and liquid-liquid doping methods respectively, then doped molybdenum powder was prepared by powder metallurgy, and finally Al2O3 particle reinforced molybdenum composite material was prepared by pressing and sintering. The microstructure of doped molybdenum powder and molybdenum bar was observed by SEM. The results show that the Al2O3/Mo composite material prepared by liquid-liquid doping has small particle size and high density and hardness, and its doped Al2O3 particles are small and uniformly distributed.
KeyWords AITranslate
1王东辉,袁晓波,李中奎,郑欣,张军良,张清,白润.钼及钼合金研究与应用进展[J].稀有金属快报,2006,25(12):1-7. 被引量：89
2李国军,黄校先,郭景坤.Al_2O_3基金属陶瓷的研究现状[J].材料导报,2000,14(9):22-24. 被引量：19
3Goffredo De Portu,Stefano Guicciardi, Cesare Melandri, et al. Wear behavioour of Al2O3 - Nb composites [J].Wear,2007,62:1 346-1 352.
4常春,余大江,刘少斌,刘俊涛,李木森.Mo/Al_2O_3材料的微观结构和抗腐蚀性[J].硅酸盐学报,2008,36(8):1124-1128. 被引量：7
5余大江,常春,刘俊涛,姜江.Mo/Al_2O_3复合材料的耐磨性[J].摩擦学学报,2009,29(5):442-446. 被引量：9
6Sbaizero O,Pezzotti G, Nishida T. Fracture energy and R -curve behavior of Mo/Al2O3 composites[J].Acta Mater,1998,46(2) : 681-687.
7王思清,倪德忠,张楠.高温钼坯生产工艺研究[J].稀有金属材料与工程,1998,27(4):233-235. 被引量：11
1任磊,张云鹏,周航.氧化铝颗粒增强钼基复合材料的制备与性能研究[J].铸造技术,2013,34(5):547-549. 被引量：4
2李世磊,胡平,段毅,左烨盖,邢海瑞,李辉,邓洁,冯鹏发,王快社,胡卜亮.掺杂方式对钼合金组织与力学性能影响的研究进展[J].材料导报,2020,34(9):132-142. 被引量：3
3刘萌萌,周玉成,徐流杰.钼丝研究现状[J].特种铸造及有色合金,2021,41(3):310-316.
4李元月,刘萌萌,周玉成,徐流杰,王宾.Al_(2)O_(3)掺杂钼丝的制备与性能研究[J].稀有金属与硬质合金,2022,50(1):42-51.
5张强,蔡永丰,李晓静,刘赫雄,张楠,周文元,赖陈,董丽然,王金淑.钼合金粉末冶金研究进展[J].粉末冶金技术,2023,41(1):44-54.
1罗燕,龙文元,罗云,周谊刚.复合材料中空心颗粒的团聚效应[J].铸造技术,2015,36(3):570-572.
2罗燕,陈敏,朱彧,闫君丹.中空颗粒进入熔液的参数分析[J].热加工工艺,2017,46(15):106-108.
3郭颖利,张保红,林冰涛,李强,谢宜娜,孙晓霞.钼粉形貌对钼渗铜产品性能和组织的影响[J].粉末冶金工业,2021,31(3):104-110. 被引量：2
4林冰涛,何君,刘仲位,王承阳,李明,孙晓霞,周淑秋.固体火箭发动机用钼镧喷管断口形貌及组织分析[J].粉末冶金技术,2022,40(1):80-85.
5吴壮志,赵娜,卢瑶,刘海浪,段柏华,刘新利,王德志.第二相形状和尺寸对烧结Mo-Y_(2)O_(3)合金力学性能的影响[J].中国有色金属学报：英文版,2022,32(6):1926-1934.
6任雪婷,王广达,熊宁,周武平.氧化物强化钼合金的研究进展[J].粉末冶金工业,2022,32(4):131-138. 被引量：3
1盛绍顶,严红革,陈振华.快速凝固结合粉末冶金法制备Al_2O_3颗粒增强AZ91镁基复合材料的组织与力学性能[J].机械工程材料,2010,34(10):40-42. 被引量：7
2冯春,刘志义,宁爱林.低温时效及微量Ag对超高强度Al-Zn-Mg-Cu[J].金属热处理,2006,31(3):17-21. 被引量：5
3周曼娜,魏建锋,权高峰,宋余九.Al_2O_3颗粒增强纯铝基复合材料的研究[J].复合材料学报,1993,10(3):51-57. 被引量：14
4王林,孙军,孙院军,罗建海,王建武,赵宝华.掺杂方式对Mo-La_2O_3合金组织和力学性能的影响[J].稀有金属材料与工程,2007,36(10):1827-1830. 被引量：29
5陈健,弓满锋,伍尚华.添加不同抑制剂对硬质合金物理性能和机械性能的影响[J].硬质合金,2014,31(3):184-193. 被引量：3
6张剑锋,姜世杭,金朝阳,王笃雄.Cu中间层SiC_p/Al MMCs TLP扩散连接过程分析[J].焊接技术,2005,34(1):12-14. 被引量：6
7刘强,魏世忠,徐流杰.钼合金的发展概况及研究现状[J].稀有金属与硬质合金,2011,39(4):50-52. 被引量：11
8王攀,杨涤心,魏世忠,李继文,徐流杰.液-液掺杂钼镧合金中的稀土相研究[J].稀有金属材料与工程,2010(12):2185-2188. 被引量：8
9陈健,弓满锋,伍尚华,蒋强国.掺杂对硬质合金微观结构和晶粒生长的影响[J].材料导报,2014,28(19):25-30. 被引量：8
10张坤,刘志义,叶呈武,许晓嫦,郑青春.高Zn超高强铝合金的力学性能[J].中南大学学报：自然科学版,2004,35(2):191-194. 被引量：8
Basic Information:
DOI：
Chinese Library Classification Number:TG146.412[金属学及工艺—金属材料]
Citation Information:
Al2O3 was doped into molybdenum powder by solid-solid, liquid-solid and liquid-liquid doping methods respectively, then doped molybdenum powder was prepared by powder metallurgy, and finally Al2O3 particle reinforced molybdenum composite material was prepared by pressing and sintering. The microstructure of doped molybdenum powder and molybdenum bar was observed by SEM. The results show that the Al2O3/Mo composite material prepared by liquid-liquid doping has small particle size and high density and hardness, and its doped Al2O3 particles are small and uniformly distributed.
quote
| GB/T 7714-2015 | [1] ZHANG Dan-dan, NI Feng, XU Liu-jie, et al. Effects of Doping Methods on Microstructure and Properties of Al_2O_3/Mo Composite Material[J]. Rare Metals and Cemented Carbides, 2011(3): 35-37. |
| MLA | [1] ZHANG Dan-dan, et al., "Effects of Doping Methods on Microstructure and Properties of Al_2O_3/Mo Composite Material." Rare Metals and Cemented Carbides, no. 3, 2011, pp. 35-37. |
| APA | [1] ZHANG Dan-dan, NI Feng, XU Liu-jie, WEI Shi-zhong, & DAI Bao-zhu. (2011). Effects of Doping Methods on Microstructure and Properties of Al_2O_3/Mo Composite Material. Rare Metals and Cemented Carbides(3), 35-37. |
| IEEE | [1] ZHANG Dan-dan, NI Feng, XU Liu-jie, WEI Shi-zhong, and DAI Bao-zhu, "Effects of Doping Methods on Microstructure and Properties of Al_2O_3/Mo Composite Material," Rare Metals and Cemented Carbides, no. 3, pp. 35-37, 2011. keywords: {molybdenum alloy;Al2O3 doping;density;microhardness} |