Design of Multi-position Fixtures for Electrical Discharge Machining of Inner Hole Chute Products AITranslate
Abstract AITranslate
Based on the example of multi-position fixture improvement for electrical discharge machining of inner hole chute products,electrical discharge machining fixtures were designed and improved up to the requirements of product size and shape tolerance.The original single-position fixtures were designed and improved to multi-position fixtures.After the three-axis CNC electrical discharge machining programs and processing parameters are optimized and the electrode structure is improved,the inner hole chute production efficiency of multi-position fixtures is about 3.86 times higher than that of the original machining fixtures,effectively reducing the manufacturing cost.
KeyWords AITranslate
1董振刚.潜油电泵机组状态监测与辨识方法研究[D]. 哈尔滨工程大学 2009
2梁炳文主编.机械加工工艺与窍门精选[M]. 机械工业出版社, 2005
1吴海会,王彤,王俊棋,尹洪石.基于Cr12MoV模具钢水雾中电火花线切割工艺研究[J].硬质合金,2017,34(2):120-128.
2吴海会,王彤,王俊棋,尹洪石.超声水雾中电火花线切割精加工特性研究[J].硬质合金,2017,34(3):179-185. 被引量：1
3郭刚.标准球在数控电火花成形加工精密定位中的应用探讨[J].深圳职业技术学院学报,2018,17(3):12-14. 被引量：1
4任芸丹,林杰.面向智能制造多工位高效取放机构设计与制造[J].制造技术与机床,2019,0(11):65-68.
1刘刚.电火花加工中电腐蚀的攻关难题解决方式[J].中国新技术新产品,2020(15):60-61.
2王彤,张通,吴吉荣,吴林波,马永会,刘盼.基于PNN神经网络电火花线切割中厚度工件放电状态研究[J].硬质合金,2018,35(5):351-357. 被引量：1
1孙建军.利用多工位夹具提高数控机床加工效率[J].煤矿机电,2007,28(1):85-86. 被引量：3
2卫永钧,李宏兴.铸件结构工艺性改进实例[J].铸造,1989(10):21-23.
3傅兴森,姜静,杨占良.多工位夹具设计中的分层结构法[J].机床,1993(8):14-15.
4Peter Zelinski.运行程序优化加工过程[J].现代制造,2007(11):136-136.
5王大权.铸件质量改进实例[J].东方汽轮机,1991(1):60-64.
6陈襄清,张颖,罗文斌.连杆对口磨夹具的设计[J].装备维修技术,2014(4):51-55.
7苗晓鹏,马江虎,苏华礼.差速器壳十字轴孔四面双工位鉆镗组合机床设计[J].组合机床与自动化加工技术,2012(12):102-104. 被引量：6
8喻步贤,钟毅,朱守干.分动箱壳数控铣削工艺及多工位夹具设计与应用[J].组合机床与自动化加工技术,2015(10):134-137. 被引量：9
9孙海燕,苗雅丽.动力锂电池盖帽焊接夹具设计[J].电焊机,2015,45(8):126-128. 被引量：2
10黄显军.螺纹的数控铣削加工[J].黑龙江科技信息,2003(7):70-70.
Basic Information:
DOI：
Chinese Library Classification Number:TG661[金属学及工艺—金属切削加工及机床];TG75[金属学及工艺—刀具与模具]
Citation Information:
Based on the example of multi-position fixture improvement for electrical discharge machining of inner hole chute products,electrical discharge machining fixtures were designed and improved up to the requirements of product size and shape tolerance.The original single-position fixtures were designed and improved to multi-position fixtures.After the three-axis CNC electrical discharge machining programs and processing parameters are optimized and the electrode structure is improved,the inner hole chute production efficiency of multi-position fixtures is about 3.86 times higher than that of the original machining fixtures,effectively reducing the manufacturing cost.
quote
| GB/T 7714-2015 | [1] CAI Bin, SHI Shun-liang, LV Yu-sheng. Design of Multi-position Fixtures for Electrical Discharge Machining of Inner Hole Chute Products[J]. Rare Metals and Cemented Carbides, 2015(5): 68-71. |
| MLA | [1] CAI Bin, et al., "Design of Multi-position Fixtures for Electrical Discharge Machining of Inner Hole Chute Products." Rare Metals and Cemented Carbides, no. 5, 2015, pp. 68-71. |
| APA | [1] CAI Bin, SHI Shun-liang, & LV Yu-sheng. (2015). Design of Multi-position Fixtures for Electrical Discharge Machining of Inner Hole Chute Products. Rare Metals and Cemented Carbides(5), 68-71. |
| IEEE | [1] CAI Bin, SHI Shun-liang, and LV Yu-sheng, "Design of Multi-position Fixtures for Electrical Discharge Machining of Inner Hole Chute Products," Rare Metals and Cemented Carbides, no. 5, pp. 68-71, 2015. keywords: {electrical discharge machining;multi-position fixture;inner hole chute;production efficiency} |