Study on Application of WC/Steel Composite Material for Guide Rollers AITranslate
Abstract AITranslate
Based on the contrast tests between the WC/steel composite material （ code GJH-2 alloy） and the Gx cast alloy used in bar or wire mill for guide rollers, discussion is made on the future application of the WC/steel composite material in the hot-worked die. The contrast test results showed that GJH- 2cermet is characterized by good high-temperature wear resistance under corresponding heat treatment at 450-650℃ with heavy load and sliding velocity above 2 m/s.
KeyWords AITranslate
1李沐山.国外钢结硬质合金新进展[J].硬质合金,1994,11(2):105-114. 被引量：50
2王荣滨,红梅.热冲压用DT钢结硬质合金角冲头复合强化处理研究[J].硬质合金,1995,12(4):233-237. 被引量：3
3H,BK,李沐山.凿岩工具用碳化物钢基耐磨材料的研制[J].国外难熔金属与硬质材料,1994,10(2):28-29. 被引量：2
4肖玉麟.美国钢结硬质合金的若干应用实例[J].硬质合金,1986,5(2):47-47.
5刘光俊.金属加工用的硬质合金轧辊进展[J].硬质合金,1994,11(1):44-52. 被引量：6
6高彩桥.金属的摩擦磨损与热处理[M].北京:机械工业出版社,1988..
1王晓灵.TiC硬质合金导辊的失效原因分析[J].轧钢,2012,29(2):67-70.
1陈其伟.高温磨损试验参数对WC/钢复合材料高温磨损特性的影响[J].稀有金属与硬质合金,2005,33(1):22-25. 被引量：1
2马建国,叶劲,尤显卿,刘宝.离心铸造WC/钢复合材料显微组织[J].材料热处理学报,2009,30(6):130-134. 被引量：1
3陈其伟.热处理对WC/钢复合材料高温磨损特性的影响[J].稀有金属与硬质合金,2004,32(4):10-13. 被引量：1
4尤显卿.热处理条件对WC/钢复合材料热疲劳性能的影响[J].兵器材料科学与工程,2004,27(6):23-26. 被引量：3
5陈其伟.提高轧机导卫辊寿命的研究[J].钢铁研究学报,2002,14(3):25-29. 被引量：2
6黄曼平,尤显卿,张成军,马建国.电冶熔铸WC／钢复合材料表面激光重熔工艺[J].金属热处理,2008,33(9):19-24. 被引量：1
7尤显卿,马建国,宋雪峰,任昊,黄曼平.电冶熔铸WC/钢复合材料中WC的溶解行为[J].中国有色金属学报,2005,15(9):1363-1368. 被引量：17
8尤显卿.GJW35钢结硬质合金热疲劳裂纹萌生初步探讨[J].硬质合金,1999,16(2):71-74. 被引量：6
9尤显卿,任昊,郑玉春,斯廷智.电渣熔铸WC/钢复合材料的磨损性能研究[J].特种铸造及有色合金,2003(6):19-21. 被引量：9
10尤显卿,王基才,郑玉春,黄漫平,袁根福.铸造WC/钢复合材料的锻造研究[J].热加工工艺,2002,31(6):40-42. 被引量：3
Basic Information:
DOI：
Chinese Library Classification Number:TG146.4[金属学及工艺—金属材料]
Citation Information:
Based on the contrast tests between the WC/steel composite material （ code GJH-2 alloy） and the Gx cast alloy used in bar or wire mill for guide rollers, discussion is made on the future application of the WC/steel composite material in the hot-worked die. The contrast test results showed that GJH- 2cermet is characterized by good high-temperature wear resistance under corresponding heat treatment at 450-650℃ with heavy load and sliding velocity above 2 m/s.
quote
| GB/T 7714-2015 | [1] REN Xiang, CHEN Qi-wei. Study on Application of WC/Steel Composite Material for Guide Rollers[J]. Rare Metals and Cemented Carbides, 2005(4): 4-7. |
| MLA | [1] REN Xiang, and CHEN Qi-wei. "Study on Application of WC/Steel Composite Material for Guide Rollers." Rare Metals and Cemented Carbides, no. 4, 2005, pp. 4-7. |
| APA | [1] REN Xiang, & CHEN Qi-wei. (2005). Study on Application of WC/Steel Composite Material for Guide Rollers. Rare Metals and Cemented Carbides(4), 4-7. |
| IEEE | [1] REN Xiang and CHEN Qi-wei, "Study on Application of WC/Steel Composite Material for Guide Rollers," Rare Metals and Cemented Carbides, no. 4, pp. 4-7, 2005. keywords: {WC/steel composite material;high-temperature wear;guide rollers;application} |