The Plastic Deformation of WC Phase in Cemented Carbide AITranslate
Abstract AITranslate
One brand of carbide has been made from two different raw materials. Their microstructures were observed by means of TEM,and existence of W2C, WC1-x phases in WC phase was ascertained by electron diffraction. The slip, twin deformation properties of WC phases was also investigated by application of strain on alloys. The results show that, when WC phase is as singlephase,it can generates twin-slip coordination deformation, thus the alloy exhibits high toughness, this high-plastic alloy is applicable for rock drilling.
KeyWords AITranslate
1刘曼朗,等.硬质合金中WC的微观结构及其形变断裂机制[A].中国机械工程学会.第二次全国硬质合金学术论文集[C].北京:中国机械工程学会,1983.45.
2Lewis D,et al.Plastic deformation in tungsten carbide[J].Cryst,1969,2:299.
3李臻熙,曹春晓.室温变形γ-TiAl基合金中形变孪晶与α_2片的交截机制[J].稀有金属材料与工程,2003,32(2):95-98. 被引量：5
4王雨晨,平德海,李斗星,叶恒强.纳米Pd中的孪晶滑移特征分析[J].电子显微学报,1996,15(6):496-496. 被引量：1
5Reed-Hill J,et al.RE in deformation twinning[J].Metallurgical Society Conferences,1964,25(3):295.
6Bronkhorst C A,et al.Textures and microstructures[J].Physics of Metals and Metallography,1991,14:1 031.
7Van Houtte P,et al.The work of crack formation as measure of toughness of hard metals[J].International Journal of Plasticity,1983,(7):107.
8Kalidindi,S R.Relation of strength,composition and grain size of sintered WC-Co alloy[J].Journal of the Mechanics and Physics of Solid,1998,46:267.
9Fichmeister H,et al.The mechanical properties of cemented carbide-cobalt alloys as dependent on structure[J].Archiv füer das Eisenhüttenwesen,1996,37:499.
1罗桂甫,吴建国.粗晶硬质合金的研究进展[J].硬质合金,2013,30(1):46-52. 被引量：13
2阳立庚,吴小刚.硬质合金棒材加工过程中圆柱度的控制[J].机电信息,2018(33):105-106. 被引量：1
1杨胜,顾金宝,廖军,陈洪霞.烧结压力对WC-12%Co粗晶硬质合金组织及性能的影响[J].稀有金属与硬质合金,2015,43(2):54-58.
2江丙武,蔡海燕,宋耀强,赵东,阳进,黄蕊,杜秋容.国内外路面铣刨刀具用硬质合金的现状与发展趋势[J].硬质合金,2014,31(3):194-200. 被引量：1
3张卫兵,刘向中,陈振华,陈鼎,彭程.WC-Co硬质合金最新进展[J].稀有金属,2015,39(2):178-186. 被引量：63
4金鹏,彭文.硬质合金导热系数的研究[J].硬质合金,2015,32(5):300-305. 被引量：8
5张岩,王洪福,何泠,王海鹏,罗伟,王俊元.WC-Co截齿的材料成分及硬度分析[J].热加工工艺,2017,46(2):109-112. 被引量：2
6李志华,肖平安,李晨坤,刘洋,宋建勇,陈超.粗晶TM52钢结硬质合金的冲击磨料磨损性能研究[J].材料导报,2017,31(12):39-44. 被引量：3
7李辉,孙志远,迟丽丽.高性能矿用硬质合金截齿的开发[J].硬质合金,2017,34(2):115-119. 被引量：1
8张肄冕,赵子岚,杨诣卿,石丁瑞,刘成斌,蔡沛儒,张悦.基于圆柱销加工尺寸测量及误差统计系统的研究[J].科技资讯,2019,17(33):92-92.
9汤昌仁,梁瑜,郭永忠,陈玉柏,杨树忠.粉末粒度对超粗晶硬质合金性能影响的研究[J].中国钨业,2019,34(4):41-46. 被引量：4
10罗海辉,彭宇.球磨时间对粗晶钨钴合金WC晶粒尺寸分布与WC邻接度的影响[J].硬质合金,2021,38(1):30-35. 被引量：2
1黄新,孙亚丽,颜杰,周永贵,刘清才.硬质合金中WC相的孪生变形机制[J].稀有金属材料与工程,2006,35(12):1888-1891. 被引量：4
2刘佐嘉.316L与2205不锈钢的腐蚀行为研究现状[J].腐蚀与防护,2010,31(2):149-153. 被引量：24
3王凯.两段式冷热改变对C-Mn钢奥氏体化温度的影响[J].铸造技术,2015,36(7):1748-1749.
4Al-Li合金靶的制造方法[J].有色金属与稀土应用,2015,0(2):40-40.
5韩明臣.α钛合金的热机械加工[J].稀有金属快报,2008,27(6):43-44.
6隋瑛锐,肖利,刘波.氮化锆的制备、表征和形成机制的研究[J].吉林师范大学学报：自然科学版,2008,29(3):66-68.
7信绍广,宋忠孝,杨玉学.偏压对Zr-Nb-N扩散阻挡层成分与结构的影响[J].稀有金属与硬质合金,2012,40(6):40-43. 被引量：1
8苏勇.快速凝固Al-Zr-Ti合金的组织结构[J].特种铸造及有色合金,2002(1):3-5. 被引量：2
9俞显芳,刘燕明.Dy_2Ce_2O_7和Y_2Ce_2O_7稀土铈酸盐的制备及热导率[J].中国陶瓷,2012,48(4):22-26. 被引量：8
10苏勇,张红,陈翌庆.快速凝固Al-Zr-Ti合金的组织结构[J].轻合金加工技术,2001,29(4):35-37.
Basic Information:
DOI：
Chinese Library Classification Number:TG146.4[金属学及工艺—金属材料]
Citation Information:
One brand of carbide has been made from two different raw materials. Their microstructures were observed by means of TEM,and existence of W2C, WC1-x phases in WC phase was ascertained by electron diffraction. The slip, twin deformation properties of WC phases was also investigated by application of strain on alloys. The results show that, when WC phase is as singlephase,it can generates twin-slip coordination deformation, thus the alloy exhibits high toughness, this high-plastic alloy is applicable for rock drilling.
quote
| GB/T 7714-2015 | [1] HUANG Xin, SUN Ya-li, YAN Jie, et al. The Plastic Deformation of WC Phase in Cemented Carbide[J]. Rare Metals and Cemented Carbides, 2006(1): 26-29. |
| MLA | [1] HUANG Xin, et al., "The Plastic Deformation of WC Phase in Cemented Carbide." Rare Metals and Cemented Carbides, no. 1, 2006, pp. 26-29. |
| APA | [1] HUANG Xin, SUN Ya-li, YAN Jie, LIU Qing-cai, & LI Wei-qin. (2006). The Plastic Deformation of WC Phase in Cemented Carbide. Rare Metals and Cemented Carbides(1), 26-29. |
| IEEE | [1] HUANG Xin, SUN Ya-li, YAN Jie, LIU Qing-cai, and LI Wei-qin, "The Plastic Deformation of WC Phase in Cemented Carbide," Rare Metals and Cemented Carbides, no. 1, pp. 26-29, 2006. keywords: {cemented carbide;WC;plasticity;twin-slip} |