Microstructure and Mechanical Property of La_2O_3-doped Mo-12Si-8.5B Alloys AITranslate
Abstract AITranslate
La2O3-doped Mo-12Si-8.5B alloys with different mass fraction of lanthanum oxide were prepared by liquid-liquid doping and plasma activated sintering technology.The phase analysis and observation of microstructures of Mo-Si-B alloys are conducted through XRD and optical microscope.And the mechanical property of alloy is tested.Results show that the Mo-Si-B alloys mainly consist of α-Mo,Mo3Si and Mo5SiB2 three phases,and the microstructure of the doped Mo-Si-B alloy was refined and the compressive strength was improved with the increasing of La oxide doped.
KeyWords AITranslate
1Akinc M,Kramer M J,Thom A J,et al.Boron-doped molybdenum silicides for structural applications[J].Material Science and Engineering A,1999,261(2):16-18.
2Huebsch J J,Kramer M J,Zhao H L,et al.Solubility of boron in Mo5+y Si3-y[J].Intermetallics,2000,8(2):143-150.
3Liu C T,Schneibel J H,Heatherly L.High-temperature ordered intermetallic alloys VII[A].MRS.MRS Symposium Proceedings[C].Warrendale:MRS,1999.621-627.
4Schneibel J H,Kramer M J,Easton D S.A Mo-Si-B intermetallic alloy with a continuous a-Mo matrix[J].Scripta Materialia,2002,46(3):217-221.
5Fu C L,Schneibel J H.Reducing the thermal expansion anisotropy in Mo5 Si3 by Nb and V additions:theory and experiment[J].Acta Materialia,2003,51(17):5 083-5 092.
6Tawancy H M,Sridhar N.High-temperature oxidation behavior of a Ni-Cr-Al-Fe-Y alloy[J].Oxidation of Metals,1992,37(4):143-166.
7Thanneeru R,Patil S,Deshpande S,et al.Effect of trivalent rare earth dopants in nanocrystalline ceria coatings for high-temperature oxidation resistance[J].Acta Materialia,2007,55(10):3 457-3 466.
8Zhang GJ,Sun YJ,Zuo C,et al.Microstructure and mechanical properties of multi-components rare earth oxidedoped molybdenum alloys[J].Materials Science and Engineering A,2008,384(15):350-352.
9Zhang J,Liu K,Zhou M.Development and application of spark plasma sintering[J].Powder Metal Technol,2002,129(3):46-52.
10Schneibel J H,Kramer M J,Unal O,et al.Processing and mechanical properties of a molybdenum silicide with the composition Mo-12Si-8.5B[J].Intermetallics,2001,9(4):25-31.
1郭磊,宋瑞,淡新国,金波,赵娟,张清,胡平.稀土钼合金制备工艺及强韧化机理研究现状[J].中国钼业,2017,41(2):45-51. 被引量：6
1杨礼林,张启富,贺智勇,李晓刚.HfC添加对钼钨合金高温等离子烧蚀性能影响及机理分析[J].粉末冶金材料科学与工程,2018,23(2):137-146. 被引量：7
2于金程,秦丰,钱王欢,田学锋,陈玉平.高温高应变率下纯钼动态力学性能与失效行为[J].有色金属工程,2019,9(5):28-33. 被引量：1
3白宁娜,刘向春,邓韬,陆彤,张叶雯,郭月,邓军平.富硅钼尾矿的疏水改性[J].硅酸盐学报,2020(5):761-767. 被引量：1
4段琳琳,冯鹏发,党晓明.Y_(2)O_(3)–CeO_(2)双相弥散强化对Mo合金晶粒度及拉伸性能的影响[J].粉末冶金技术,2021,39(3):223-228.
5潘以庆,田青超,徐文进.钼合金顶头制备技术研究进展[J].粉末冶金技术,2021,39(5):452-461. 被引量：1
6田娅,马立文,席晓丽.电沉积法制备含钼合金的研究进展[J].材料导报,2023,37(3):181-187.
1朱艳,杨双平,孙军.高温Mo-12Si-8.5B合金制备工艺和性能[J].稀有金属材料与工程,2010,39(A01):263-265. 被引量：1
2商传明,侯立红.氧化镧掺杂金属陶瓷的制备与性能研究[J].现代技术陶瓷,2009,30(2):12-15.
3徐健建,颜建辉,汪异,刘龙飞,王跃明.W对Mo-Si-B合金微观组织和力学性能的影响[J].材料热处理学报,2015,36(8):22-27. 被引量：4
4魏世忠,周玉成,段素红,张国赏.氧化镧含量对钼板组织与性能的影响[J].河南科技大学学报：自然科学版,2013,34(2):1-4. 被引量：6
5寇浩,张国君,孙院军,孙军.Mo-Si-B合金高温氧化性能研究进展[J].中国钼业,2009,33(1):34-39. 被引量：1
6刘张涛,郭喜平.Mo-Si-B基超高温合金粉体的机械合金化[J].粉末冶金材料科学与工程,2013,18(4):503-509. 被引量：2
7王方,单萌,单爱党,吴建生.Mo-Si-B三元硅化物显微组织及氧化行为研究[J].稀有金属材料与工程,2006,35(12):1920-1923. 被引量：6
8潘昆明,张来启,魏世忠,李继文,李豪,林均品.Mo-Si-B三元系中T2相合金的制备工艺研究[J].金属学报,2015,51(11):1377-1383. 被引量：5
9杨凯华,秦昊,潘秉锁.稀土在热压人造金刚石工具中的应用研究[J].地质科技情报,2001,20(3):110-112. 被引量：3
10张伟,张泽磊,张晋涛.Y_2O_3添加对Cu-W合金显微组织和性能的影响[J].铸造技术,2015,36(2):471-474. 被引量：2
Basic Information:
DOI：
Chinese Library Classification Number:TG146.412[金属学及工艺—金属材料]
Citation Information:
La2O3-doped Mo-12Si-8.5B alloys with different mass fraction of lanthanum oxide were prepared by liquid-liquid doping and plasma activated sintering technology.The phase analysis and observation of microstructures of Mo-Si-B alloys are conducted through XRD and optical microscope.And the mechanical property of alloy is tested.Results show that the Mo-Si-B alloys mainly consist of α-Mo,Mo3Si and Mo5SiB2 three phases,and the microstructure of the doped Mo-Si-B alloy was refined and the compressive strength was improved with the increasing of La oxide doped.
quote
| GB/T 7714-2015 | [1] MA Bao-ping, ZHANG Guo-jun. Microstructure and Mechanical Property of La_2O_3-doped Mo-12Si-8.5B Alloys[J]. Rare Metals and Cemented Carbides, 2010(2): 26-30. |
| MLA | [1] MA Bao-ping, and ZHANG Guo-jun. "Microstructure and Mechanical Property of La_2O_3-doped Mo-12Si-8.5B Alloys." Rare Metals and Cemented Carbides, no. 2, 2010, pp. 26-30. |
| APA | [1] MA Bao-ping, & ZHANG Guo-jun. (2010). Microstructure and Mechanical Property of La_2O_3-doped Mo-12Si-8.5B Alloys. Rare Metals and Cemented Carbides(2), 26-30. |
| IEEE | [1] MA Bao-ping and ZHANG Guo-jun, "Microstructure and Mechanical Property of La_2O_3-doped Mo-12Si-8.5B Alloys," Rare Metals and Cemented Carbides, no. 2, pp. 26-30, 2010. keywords: {La oxide doping;Mo-12Si-8.5B alloy;microstructure;mechanical property} |