Study on Influence of WC Total Carbon Content on Shrinkage Coefficient of WC-9%Co Cemented Carbide AITranslate
Abstract AITranslate
WC powder was used as raw material with Fisher particle size of 13μm,which was blended based on total carbon content of 5.96%,5.94% and 5.91%,respectively,with 9% Co.The blend was prepared by rubber technology,then it was pressed and sintered to obtain cemented carbide product.Shrinkage coefficient of the cemented carbide product was investigated.The results show that the shrinkage coefficient of WC-9%Co cemented carbide product decreases with increased WC total carbon content in case of the same ball milling process,forming mode,sintering temperature and heat preservation time and the similar alloy magnetic saturation.
KeyWords AITranslate
1郭圣达,羊建高,陈颢,吕健,朱二涛.粗晶硬质合金体积收缩率、冲击韧性和横向断裂强度影响因素的研究[J].稀有金属与硬质合金,2013,41(3):54-57. 被引量：2
2方琴,张崇才,章雪,李大林,赵志伟.粉体粒度对钨钴钛硬质合金烧结特性的影响[J].西华大学学报：自然科学版,2009,28(6):105-108. 被引量：5
3张丽英,晏洪波,胡钊辉,吴成义,吴庆华,崔萍.纳米级超细晶粒硬质合金烧结收缩动力学曲线特征的研究[J].粉末冶金工业,2000,10(5):15-21. 被引量：4
1冯文,袁彩云,赵丽丽,宁华林,何莹.一种双面负角铣削刀片模具补偿设计方法的研究[J].硬质合金,2019,36(3):221-227. 被引量：1
2冯文,王芳,冯佳,崔宝宝.DORST-15HS压机行程比对正角刀片尺寸精度的影响[J].硬质合金,2021,38(2):117-122. 被引量：1
1冯文,王芳,冯佳,崔宝宝.DORST-15HS压机行程比对正角刀片尺寸精度的影响[J].硬质合金,2021,38(2):117-122. 被引量：1
2冯克明,王庆伟,杜晓旭,贾伟民,夏学锋.四柱压机的精密压制技术[J].金刚石与磨料磨具工程,2023,43(3):298-304.
1王新庆,孟飞,李栓才.钼产品生产工艺浅谈[J].中国钼业,2011,35(4):55-57. 被引量：2
2董凯林,曹万里,时凯华,江庆,高建.碳含量对WC-9Ni-1Cr细晶硬质合金组织结构及性能的影响[J].粉末冶金材料科学与工程,2015,20(3):449-455. 被引量：3
3周娟,金海兵,胡楠楠.连铸板坯宽度控制生产实践[J].鄂钢科技,2014,0(2):24-26. 被引量：1
4周建华,孙宝琦,吴国龙.不同粒度镍粉对WC－9％Ni硬质合金性能和组织的影响[J].稀有金属与硬质合金,1994,22(3):21-25. 被引量：4
5黄伟,刘志.SD成型剂在硬质合金生产上的应用研究[J].四川冶金,2015,37(4):1-3. 被引量：2
6史留勇,刘义敏,张守全,黄继华,赵兴科.初始成分对梯度硬质合金微观组织及脱β层厚度的影响[J].中国有色金属学报,2012,22(7):1984-1990. 被引量：6
7周建华,孙宝琦,吴国龙.不同形态镍粉的研磨行为及其对WC－9％Ni硬质合金组织和性能的影响[J].稀有金属与硬质合金,1994,22(2):5-10. 被引量：4
8吴翔,石敏,闵召宇.硬质合金表面凹点的研究[J].稀有金属与硬质合金,2013,41(3):58-60.
9何会琴.ACC-9系列连铸保护渣的使用效果[J].四川冶金,1989,11(4):31--35.
10梁巨烈.磁饱和仪在硬质合金生产中的应用[J].硬质合金,2001,18(3):175-178. 被引量：10
Basic Information:
DOI：
Chinese Library Classification Number:TF125.3[冶金工程—粉末冶金];TF124[冶金工程—粉末冶金]
Citation Information:
WC powder was used as raw material with Fisher particle size of 13μm,which was blended based on total carbon content of 5.96%,5.94% and 5.91%,respectively,with 9% Co.The blend was prepared by rubber technology,then it was pressed and sintered to obtain cemented carbide product.Shrinkage coefficient of the cemented carbide product was investigated.The results show that the shrinkage coefficient of WC-9%Co cemented carbide product decreases with increased WC total carbon content in case of the same ball milling process,forming mode,sintering temperature and heat preservation time and the similar alloy magnetic saturation.
quote
| GB/T 7714-2015 | [1] XIN Hai-yan, SHI Shun-liang, WU Xiang, et al. Study on Influence of WC Total Carbon Content on Shrinkage Coefficient of WC-9%Co Cemented Carbide[J]. Rare Metals and Cemented Carbides, 2015(6): 69-72. |
| MLA | [1] XIN Hai-yan, et al., "Study on Influence of WC Total Carbon Content on Shrinkage Coefficient of WC-9%Co Cemented Carbide." Rare Metals and Cemented Carbides, no. 6, 2015, pp. 69-72. |
| APA | [1] XIN Hai-yan, SHI Shun-liang, WU Xiang, & XIAO Ke. (2015). Study on Influence of WC Total Carbon Content on Shrinkage Coefficient of WC-9%Co Cemented Carbide. Rare Metals and Cemented Carbides(6), 69-72. |
| IEEE | [1] XIN Hai-yan, SHI Shun-liang, WU Xiang, and XIAO Ke, "Study on Influence of WC Total Carbon Content on Shrinkage Coefficient of WC-9%Co Cemented Carbide," Rare Metals and Cemented Carbides, no. 6, pp. 69-72, 2015. keywords: {cemented carbide;WC total carbon content;shrinkage coefficient;rubber technology} |