Investigation on Corrosion Resistance of Ni-based Cladding Layer Reinforced by In-situ Grown VC-WC-W_2C AITranslate
Abstract AITranslate
Ni-based cladding layer reinforeed by in-situ grown VC-WC-W2C particles was prepared on the surfarce of 45# steel substrate by laser cladding technology,and its corrosion resistance was studied in 10% H2SO4 solution with static immersion method. The results show that all the Ni-based cladding layers with different contents of V2O5 ＋WO3 ＋C exhibit good corrosion resistance in 10% H2SO4 solution, of which the corrosion resistance of Ni-based cladding layer with 25 % （V2O5 ＋ WO3 ＋ C） is the best, almost three times as much as that of pure Ni-60 cladding layer.
KeyWords AITranslate
1LUO Fang,YAO Jian hua,HU Xia xia,CHAI Guo-zhong.Effect of Laser Power on the Cladding Temperature Field and the Heat Affected Zone[J].钢铁研究学报：英文版,2011(1):73-78. 被引量：25
2李荐,李淳伟,夏亨,刘凡,李艳芬,杨亮,杨俊.添加ZrO_2对Si_3N_4复合陶瓷材料力学性能的影响[J].稀有金属与硬质合金,2012,40(1):38-40. 被引量：7
3周笑薇,晁明举,杨文超.原位生成WB-CrB增强镍基激光熔覆层的耐蚀性研究[J].激光杂志,2011,32(1):43-44. 被引量：5
4葛亚琼,王文先.不同激光功率下镁合金表面激光熔覆Ni60合金涂层的显微组织和磨损性能[J].中国表面工程,2012,25(1):45-50. 被引量：16
5胡泽祥,刘杰瑞,郭纯,周健松,张世堂.激光熔覆NiCoCrAlY/HfB_2复合涂层结构及高温摩擦学性能[J].中国表面工程,2012,25(2):69-74. 被引量：5
6梁会琴,晁明举,王东升,梁二军.Ta_2O_5/Ni60激光熔覆层的耐蚀性研究[J].激光杂志,2007,28(6):78-79. 被引量：4
7邱星武,李刚,邱玲.激光熔覆技术发展现状及展望[J].稀有金属与硬质合金,2008,36(3):54-57. 被引量：54
1高东强,王蕊,陈威,王哲.激光熔覆改善材料性能的研究进展[J].热加工工艺,2017,46(12):14-18. 被引量：19
2王晓峰,赵瑞山,谌志伟.氩弧熔覆NiCrWCAl合金涂层组织结构与性能研究[J].稀有金属与硬质合金,2018,46(3):13-18. 被引量：1
1董虎林,彭建洪,李海琴,毛多鹭,包海萍,杨永潇,李海宾.原位法制备颗粒增强铁基复合材料的研究进展[J].热加工工艺,2017,0(22):23-28. 被引量：4
2王立超,李振,谢小军.汽车发动机ZL109活塞表面激光熔覆及耐蚀性能研究[J].铸造技术,2018,39(4):910-913. 被引量：2
3付祖冈,张自强,孟贺超,程相榜.激光熔覆技术在高腐蚀环境下液压支架的试验研究[J].煤炭科学技术,2018,46(5):155-159. 被引量：12
4练国富,张浩,黄旭,陈昌荣,江吉彬.热传导环境因素对激光熔覆成形质量的影响[J].应用激光,2018,38(5):705-712.
5陈晶,颜飞雪.基于激光熔覆技术的热防护材料选择[J].材料导报,2018,32(A02):322-325. 被引量：1
6何昱煜,刘益剑,陈明,黄无云,戴鑫,毛建良,徐泽玮.激光扫描速率与熔覆层组织性能的规律研究[J].激光技术,2019,43(2):201-204. 被引量：8
7顾彩香,顾昊文,李文戈,朱冠军,冯杰才.激光熔覆技术在船舶工程中的研究状况[J].船舶工程,2019,41(1):74-78. 被引量：4
8丁阳喜,张远昊,邵晓峰.高速轮轨钢超声振动辅助激光熔覆涂层的滚动摩擦磨损性能[J].材料保护,2019,52(3):6-12.
9江国业,徐平,李敏,庞铭,王岩.扫描速度对激光熔覆Ni35微观组织与力学特性的影响[J].热加工工艺,2019,48(16):96-101. 被引量：4
10徐平,江国业,胡艳娇,庞铭.匙孔效应对激光熔覆层横截面几何形貌的影响研究[J].表面技术,2019,48(10):125-130. 被引量：5
1王长生,杨蕴林.WC加入量对Ni60自熔合金喷焊层磨粒磨损性能影响[J].热加工工艺,1997,26(1):28-30. 被引量：16
2卢金斌.真空熔结镍基合金的界面组织研究[J].真空,2006,43(6):30-31. 被引量：7
3雷宇,罗军明,万润根.Y_2O_3对45钢表面激光熔覆镍基合金的影响[J].新技术新工艺,2007(8):64-65. 被引量：3
4周笑薇,晁明举,王文丽.碳纳米管对Ni60激光熔覆层的耐蚀性影响[J].激光杂志,2007,28(2):75-76. 被引量：2
5姚秀军,边秀房,宋金子.厚镍基激光熔覆层的研究[J].特种铸造及有色合金,2009(8):776-778. 被引量：2
6周思华,晁明举,刘奎立,郭艳花.原位生成WC-B_4C增强镍基激光熔覆层及其性能研究[J].表面技术,2014,43(3):25-30. 被引量：15
7卢金斌,穆云超,毋新房.激光熔覆添加稀土Ni基合金涂层的组织[J].热加工工艺,2007,36(16):53-55. 被引量：1
8罗军明,张剑平,温桢洪.Y_2O_3对40Cr钢激光熔覆层组织性能影响[J].应用激光,2009,29(5):402-404. 被引量：2
9卢金斌.真空熔结镍基合金涂层性能的研究[J].表面技术,2006,35(6):25-26. 被引量：12
10相珺,李刚,邱玲,况军,邱星武.ZrO_2增强镍基激光熔覆层的组织与性能[J].机械工程材料,2009,33(2):59-62. 被引量：5
Basic Information:
DOI：
Chinese Library Classification Number:TG174.4[金属学及工艺—金属表面处理]
Citation Information:
Ni-based cladding layer reinforeed by in-situ grown VC-WC-W2C particles was prepared on the surfarce of 45# steel substrate by laser cladding technology,and its corrosion resistance was studied in 10% H2SO4 solution with static immersion method. The results show that all the Ni-based cladding layers with different contents of V2O5 ＋WO3 ＋C exhibit good corrosion resistance in 10% H2SO4 solution, of which the corrosion resistance of Ni-based cladding layer with 25 % （V2O5 ＋ WO3 ＋ C） is the best, almost three times as much as that of pure Ni-60 cladding layer.
quote
| GB/T 7714-2015 | [1] YANG Ning, LI Li-kai, ZHAO Xian-lin. Investigation on Corrosion Resistance of Ni-based Cladding Layer Reinforced by In-situ Grown VC-WC-W_2C[J]. Rare Metals and Cemented Carbides, 2014(1): 42-45. |
| MLA | [1] YANG Ning, et al., "Investigation on Corrosion Resistance of Ni-based Cladding Layer Reinforced by In-situ Grown VC-WC-W_2C." Rare Metals and Cemented Carbides, no. 1, 2014, pp. 42-45. |
| APA | [1] YANG Ning, LI Li-kai, & ZHAO Xian-lin. (2014). Investigation on Corrosion Resistance of Ni-based Cladding Layer Reinforced by In-situ Grown VC-WC-W_2C. Rare Metals and Cemented Carbides(1), 42-45. |
| IEEE | [1] YANG Ning, LI Li-kai, and ZHAO Xian-lin, "Investigation on Corrosion Resistance of Ni-based Cladding Layer Reinforced by In-situ Grown VC-WC-W_2C," Rare Metals and Cemented Carbides, no. 1, pp. 42-45, 2014. keywords: {VC-WC-W2 C;Ni60 self-fluxing alloy;laser cladding;particle reinforcement;in-situ growth;cor-rosion resistance} |