daohang fenxiangbox searchbox qikanlogonew daohangnew searchboxnew navrightzone footerzone paper

A New Process for Molybdenum-Tungsten Extraction from High Pressure Leaching Solution of Crude Molybdenum-Tungsten Oxide Concentrate AITranslate

Zhengzhou Institute of Mineral Comprehensive Utilization of China Academy of Geological Sciences;Zhengzhou Institute of Mineral Comprehensive Utilization of China Academy of Geological Sciences;Zhengzhou Institute of Mineral Comprehensive Utilization of China Academy of Geological Sciences;Zhengzhou Institute of Mineral Comprehensive Utilization of China Academy of Geological Sciences
AITranslate
Publisher: Editorial Office of Rare Metals and Cemented Carbides
Share Citation Information Add to Favorites

    Scan to share on WeChat or Moments

Use WeChat scan.
Share with WeChat friends or Moments

Abstract AITranslate

A new process of molybdenum-tungsten extraction from high pressure leaching solution of crude molybdenum-tungsten oxide concentrate was studied,including the steps of solution pre-treatment, molyb- denum-tungsten precipitation, solid-liquid separation, product drying and so on. When the high pressure leaching solution contains 27.26 g/L Mo and 5.70 g/L WOa ,Mo and WOa precipitation rates are 99.94% and 85.08 %, respectively, under the conditions of pH value of 7-8, precipitation time of 1-1.5 h, reaction temperature of 80 ℃, and CaC12 dosage of 2. 15 times the theoretical value, and the calcium molybdate- tungstate product contains 36.08% Mo and 7.11% WO3 ,with impurity of 0. 012% P and 0. 004 5% As. The new process has simple flowsheet,good operability and high molybdenum-tungsten recovery.

KeyWords AITranslate

crude molybdenum-tungsten oxide concentrate high pressure leaching solution molybdenum-tungsten precipitation calcium molybdate-tungstate

1曹耀华,刘红召,高照国,杨绍文.低品位氧化钼精矿高压浸出新工艺[J].有色金属:冶炼部分,2011(1):5-8. 被引量:7

2皮关华,徐徽,陈白珍,石西昌,李俊丽.从难选镍钼矿中回收钼的研究[J].湖南有色金属,2007,23(1):9-12. 被引量:42

3李青刚,张启修,肖连生.离子交换树脂吸附镍钼矿氯浸液中钼的研究[J].稀有金属,2007,31(3):351-356. 被引量:14

4盘茂森,朱云.高压浸出钼酸钙中钼的实验研究[J].中国钼业,2005,29(6):19-21. 被引量:20

5李青刚,肖连生,张贵清,张启修.镍钼矿生产钼酸铵全湿法生产工艺及实践[J].稀有金属,2007,31(S1):85-89. 被引量:52

6符剑刚,王晖,钟宏,常庆伟,魏志锋,马盛韬.从彩钼铅矿中提取钼的研究现状[J].稀有金属与硬质合金,2007,35(1):41-43. 被引量:12

7张文朴.我国钼资源综合利用及再生研发的进展[J].资源再生,2007(1):67-70. 被引量:1

8汪胜东,蒋训雄,王海北,范艳青,张邦胜,王玉芳.贵州某彩钼铅矿碱浸工艺研究[J].有色金属,2007,59(3):65-67. 被引量:10

1张鸿彪,牟文宁,宋佩,卢媛嫄,孙雷雷.钼矿冶炼新工艺发展概论[J].材料导报:纳米与新材料专辑,2013,27(2):87-90. 被引量:5

2Fei Cao,Wei Wang,De-zhou Wei,Wen-gang Liu.Separation of tungsten and molybdenum with solvent extraction using functionalized ionic liquid tricaprylmethylammonium bis(2,4,4-trimethylpentyl)phosphinate[J].矿物冶金与材料学报:英文版,2021,28(11):1769-1776. 被引量:1

1陈德良,董会娜,张锐.二硫化钼基纳米复合材料的构筑与应用[J].郑州大学学报:工学版,2015,36(6):18-29.

2黄万抚,李英杰,李新冬,梁娟,陈洋,刘玉娇.纳滤技术在矿冶领域的应用研究进展[J].工业水处理,2016,36(11):1-4. 被引量:5

3李建涛,庄肃凯,南宁,李凯斌,朱明明.浸矿菌的选育及对低品位钼矿的浸出试验研究[J].金属矿山,2018,47(5):103-107. 被引量:1

4郜伟,张永禄,揭晓武,余群波.钼精矿氧化焙烧试验研究[J].中国资源综合利用,2020,38(10):12-14.

5夏新兵,张贵清,关文娟,曾理,巫圣喜,李青刚,曹佐英.采用TRPO从过氧化氢溶液中萃取钼和钨的数学模型和反应机理[J].中国有色金属学报:英文版,2022,32(9):3123-3135.

6赵欢,张广积,杨巧文,李媛媛,吴涛,杨超.低品位钼尾矿生物浸出实验研究[J].稀有金属与硬质合金,2015,43(6):7-11. 被引量:2

1和晓才.生产钨酸钙过程中的除钼工艺[J].云南冶金,2008,37(1):33-35. 被引量:1

2冯慧君,王洪杰,刘小明.低品位氧化钼钨精矿高温高压碱浸工艺工业生产实践[J].矿冶工程,2013,33(4):98-100. 被引量:3

3范树森.钨酸钙的粒度控制及白钨母液中钨的回收[J].稀有金属与硬质合金,1993,21(2):13-16. 被引量:2

4范树森.钨酸钙沉淀的粒度控制[J].中国钨业,1993,0(8):15-17.

5瑞林.美国难熔金属协会抑制中国钨进口[J].中国钨业,1993,0(8):32-32.

6А.С.Медведев,秦川.酸分解白钨精矿的方法[J].中国钨业,1993,0(4):27-29.

7李裕芳,赖道玉.不同颗粒人造白钨的制取[J].中国钨业,1990(11):11-14. 被引量:2

8刘吉刚,李正邦,刘彦华,杨海森,梁林宝.钨酸钙球团碳化硅还原试验研究[J].有色金属:冶炼部分,2013(3):20-23.

9殷家旺,舒国兵.电炉初炼钢As含量来源分析[J].柳钢科技,2007(F09):121-123.

10殷家旺,舒国兵.电炉初炼钢As含量来源分析[J].鄂钢科技,2007,0(3):1-2.

Basic Information:

DOI:

Chinese Library Classification Number:TF841.2[冶金工程—有色金属冶金]

Citation Information:

A new process of molybdenum-tungsten extraction from high pressure leaching solution of crude molybdenum-tungsten oxide concentrate was studied,including the steps of solution pre-treatment, molyb- denum-tungsten precipitation, solid-liquid separation, product drying and so on. When the high pressure leaching solution contains 27.26 g/L Mo and 5.70 g/L WOa ,Mo and WOa precipitation rates are 99.94% and 85.08 %, respectively, under the conditions of pH value of 7-8, precipitation time of 1-1.5 h, reaction temperature of 80 ℃, and CaC12 dosage of 2. 15 times the theoretical value, and the calcium molybdate- tungstate product contains 36.08% Mo and 7.11% WO3 ,with impurity of 0. 012% P and 0. 004 5% As. The new process has simple flowsheet,good operability and high molybdenum-tungsten recovery.

quote

GB/T 7714-2015 [1] CAO Yao-hua, WANG Hong-jie, LIU Hong-zhao, et al. A New Process for Molybdenum-Tungsten Extraction from High Pressure Leaching Solution of Crude Molybdenum-Tungsten Oxide Concentrate[J]. Rare Metals and Cemented Carbides, 2013(1): 17-19.
MLA [1] CAO Yao-hua, et al., "A New Process for Molybdenum-Tungsten Extraction from High Pressure Leaching Solution of Crude Molybdenum-Tungsten Oxide Concentrate." Rare Metals and Cemented Carbides, no. 1, 2013, pp. 17-19.
APA [1] CAO Yao-hua, WANG Hong-jie, LIU Hong-zhao, & GAO Zhao-guo. (2013). A New Process for Molybdenum-Tungsten Extraction from High Pressure Leaching Solution of Crude Molybdenum-Tungsten Oxide Concentrate. Rare Metals and Cemented Carbides(1), 17-19.
IEEE [1] CAO Yao-hua, WANG Hong-jie, LIU Hong-zhao, and GAO Zhao-guo, "A New Process for Molybdenum-Tungsten Extraction from High Pressure Leaching Solution of Crude Molybdenum-Tungsten Oxide Concentrate," Rare Metals and Cemented Carbides, no. 1, pp. 17-19, 2013. keywords: {crude molybdenum-tungsten oxide concentrate;high pressure leaching solution;molybdenum-tungsten precipitation;calcium molybdate-tungstate}