daohang fenxiangbox searchbox qikanlogonew daohangnew searchboxnew navrightzone footerzone paper
English
Chinese 简体中文 English English
Home > Journals > Advances in Manufacturing
‹ Previous Article Next Article ›

Plasma transferred arc forming technology for remanufacture AITranslate

YaoHui Lü; YuXin Liu; FuJia Xu; BinShi Xu
Science and Technology on Remanufacturing Laboratory;Science and Technology on Remanufacturing Laboratory;Science and Technology on Remanufacturing Laboratory;Science and Technology on Remanufacturing Laboratory
AITranslate
Publisher: Springer Nature
Share Citation Information Add to Favorites

    Scan to share on WeChat or Moments

Use WeChat scan.
Share with WeChat friends or Moments

Abstract AITranslate

The plasma transferred arc (PTA) forming remanufacturing technology was introduced in this paper. This technology includes plasma surfacing, deposition and rapid forming technology. With self-developed plasma forming system, the thrust of engine cylinder body was remanufactured by PTA powder surfacing. In the concrete, the Ni15 alloy was deposited on the thrust face of the body in order to recover its dimension. In addition, the remanufacturing forming with Fe-based, Inconel 625 alloy was studied. The microstructure and hardness of the as-deposited materials were investigated.

KeyWords AITranslate

Plasma transferred arc (PTA) Forming remanufacturing Microstructure Hardness
No data

Basic Information:

DOI：https://doi.org/10.1007/s40436-013-0017-2

Chinese Library Classification Number:

Citation Information:

The plasma transferred arc (PTA) forming remanufacturing technology was introduced in this paper. This technology includes plasma surfacing, deposition and rapid forming technology. With self-developed plasma forming system, the thrust of engine cylinder body was remanufactured by PTA powder surfacing. In the concrete, the Ni15 alloy was deposited on the thrust face of the body in order to recover its dimension. In addition, the remanufacturing forming with Fe-based, Inconel 625 alloy was studied. The microstructure and hardness of the as-deposited materials were investigated.

quote

GB/T 7714-2015 [1] YaoHui Lü, YuXin Liu, FuJia Xu, et al. Advances in Manufacturing, 2013(1). DOI:10.1007/s40436-013-0017-2.
MLA [1] YaoHui Lü, et al., Advances in Manufacturing, no. 1, 2013, https://doi.org/10.1007/s40436-013-0017-2.
APA [1] YaoHui Lü, YuXin Liu, FuJia Xu, & BinShi Xu. (2013). Advances in Manufacturing(1). https://doi.org/10.1007/s40436-013-0017-2
IEEE [1] YaoHui Lü, YuXin Liu, FuJia Xu, and BinShi Xu, Advances in Manufacturing, no. 1, 2013, doi: 10.1007/s40436-013-0017-2. keywords: {Plasma transferred arc (PTA);Forming remanufacturing;Microstructure;Hardness}