daohang fenxiangbox searchbox qikanlogonew daohangnew searchboxnew navrightzone footerzone paper

Study on Low Cycle Impact Fatigue Performance of WC-Co Cemented Carbides AITranslate

School of Materials Science and Engineering, Hunan University;School of Materials Science and Engineering, Hunan University;School of Materials Science and Engineering, Hunan University;School of Materials Science and Engineering, Hunan University;School of Materials Science and Engineering, Hunan University
AITranslate
Publisher: Editorial Office of Rare Metals and Cemented Carbides
Share Citation Information Add to Favorites

    Scan to share on WeChat or Moments

Use WeChat scan.
Share with WeChat friends or Moments

Abstract AITranslate

To study impact fatigue fracture mechanism of WC-Co cemented carbides and effects of microstructure parameters on their low cycle impact fatigue performance, impact fatigue tests were carried out for six kinds of cemented carbides with different WC grain size and Co content. And the impact fatigue fracture was observed by scanning electron microscopy. The results show that the cracks in the cemented carbides with impact loading are initiated from the powder metallurgy defects, the initiated cracks are interconnected with the holes to form the main cracks, and the rapid propagation of the main cracks leads to fatigue and failure of cemented carbides. The cemented carbide with higher Co content has greater fatigue sensitivity and shorter impact fatigue lifetime. The cemented carbide with larger WC grain size has longer impact fatigue life.

KeyWords AITranslate

cemented carbide WC-Co impact fatigue fracture mechanism WC grain size Co content

1张忠健,赵声志,彭文,张倩霞,陈鼎.硬质合金疲劳裂纹的萌生与扩展行为[J].中国有色金属学报,2014,24(12):3031-3041. 被引量:19

2陈振华,姜勇,陈鼎,张忠健,徐涛,彭文.硬质合金的疲劳与断裂[J].中国有色金属学报,2011,21(10):2394-2401. 被引量:28

3欧朝霞.钴含量及晶粒度对硬质合金冲击疲劳性能的影响[J].硬质合金,2008,25(1):37-41. 被引量:16

4李詠侠,刘再锋,郑峰,江自然.基于Weibull分布的冲压模具用硬质合金耐冲击疲劳性能研究[J].稀有金属与硬质合金,2012,40(4):50-55. 被引量:5

5李会会,易丹青,高跃红,黄翔,刘会群,赵声志,张忠健,王斌,彭宇.WC-Co硬质合金冲击疲劳行为的研究[J].硬质合金,2015,32(1):9-18. 被引量:5

1赖林,张颢,邹德良,饶承毅,袁红梅.硬质合金疲劳性能研究进展[J].硬质合金,2018,35(6):467-473. 被引量:2

2郭玉佩,王彬文,杨强,白春玉,刘小川.航空材料的冲击疲劳问题研究进展与展望[J].航空工程进展,2020,11(5):609-617. 被引量:10

3杨素淞,白春玉,杨强,胡伟平,詹志新.金属材料与结构冲击疲劳问题研究综述[J].航空科学技术,2021,32(2):1-13. 被引量:8

4刘萍,瞿峻,刘王平,陈响明,温光华.合金成分和涂层对WC-Co硬质合金疲劳性能的影响[J].硬质合金,2022,39(2):75-84. 被引量:1

5李泊立,赵思晗,刘圆梦,杨建辉,郭伟国.Hopkinson杆式冲击疲劳试验方法研究[J].振动与冲击,2023,42(2):132-138.

6刘雪梅,高德强,吕皓,王海滨,赵治,宋晓艳.含添加剂Cr_(3)C_(2)/VC超粗晶WC-Co硬质合金的疲劳行为及失效机理[J].硬质合金,2022,39(5):383-391.

7张伟,高文博,谢敬佩,石玉斌,张宝林,毛志平.大型硬质合金顶锤裂纹萌生及断裂行为研究[J].河南科技大学学报:自然科学版,2023,44(4):1-10.

1苗文卷,曹睿,车洪艳,董浩,陈剑虹.Stellite12钴基合金的疲劳性能及其断裂机理研究[J].材料工程,2021,49(1):153-159. 被引量:3

2杨素淞,白春玉,杨强,胡伟平,詹志新.金属材料与结构冲击疲劳问题研究综述[J].航空科学技术,2021,32(2):1-13. 被引量:8

3郭玉佩,王彬文,刘小川,白春玉,杨强.多次冲击载荷作用下典型铝合金材料动态响应规律[J].科学技术与工程,2021,21(16):6643-6650. 被引量:2

4郭玉佩,王彬文,刘小川,白春玉,杨强.TC18钛合金多次冲击损伤演化规律[J].科学技术与工程,2021,21(24):10518-10524. 被引量:1

5金建刚.基于OMATIVE自适应控制的切削加工试验研究[J].航空精密制造技术,2021,57(5):55-58.

6钱诚成,白春玉,杨强,杨素淞,王标,胡伟平,詹志新.金属材料重复冲击拉伸试验方法研究[J].航空科学技术,2021,32(12):98-106.

7杨强,高鹏,何肖,仇振国,刘新,韩康宁,白春玉,朱亚新.中性盐雾腐蚀对AA 6061-T6铝合金冲击疲劳寿命的影响研究[J].航空科学技术,2021,32(12):107-114. 被引量:1

8邢运,张桥,杨先锋,刘华,杨嘉陵.飞机蜂窝道面拦阻系统的动力学模型与数值模拟研究[J].航空科学技术,2022,33(1):66-75.

9郭玉佩,王彬文.金属材料在重复冲击下的损伤演化[J].科学技术与工程,2022,22(6):2539-2545. 被引量:1

10刘育斌,冯成慧,朱小军,王志刚,冯军.钛合金基体激光熔覆WC/TC18复合涂层滚动接触疲劳性能研究[J].航空科学技术,2022,33(3):86-90.

1吕振林,周永欣,饶启昌.球墨铸铁磨料磨损特性[J].水利电力机械,1998(6):18-22.

2古和今.瞬态冲击加载金属板的变形过程[J].江西科学,1990,8(1):7-12. 被引量:1

3其其格,蔡宁,鞠新华,刘晓岚,李黎.药芯焊丝拉拔断裂原因分析[J].首钢科技,2012(3):40-42.

4冯喜奎,贾华坡,任毛丁.异型小截面冷轧硬质合金轧辊损伤的形式、特点及对策[J].硬质合金,2016,33(6):410-415.

5王迎鲜,贾淑果,周延军,宋克兴,李周.Co元素对挤压态铍青铜合金组织性能的影响[J].材料热处理学报,2017,38(6):49-53. 被引量:2

6刘艳军,陈康华,李詠侠,吴恩熙,邹丹,谢元彦.硬质合金中碳含量对晶粒生长抑制剂抑制效果的影响[J].稀有金属与硬质合金,2017,45(3):65-70. 被引量:4

7黄桂林,蔡勤,陈韶斌.一台储罐外表面焊缝裂纹开裂原因分析[J].化学工程与装备,2017(6):184-185. 被引量:1

8郑小平,姜龙,宋进英,田亚强,陈连生.7075铝合金半固态坯料的热轧组织与力学性能[J].热加工工艺,2017,46(13):50-52. 被引量:2

9孙世贵,王勇,郭进京,高增,姜玉领.内燃机气缸套表面改性研究进展[J].热加工工艺,2017,46(12):31-34. 被引量:2

10祁豆豆,林万明,李双寿.淬火-分配工艺对高强钢疲劳失效的影响[J].中国冶金,2017,27(6):24-29. 被引量:8

Basic Information:

DOI:

Chinese Library Classification Number:TG135.5[一般工业技术—材料科学与工程]

Citation Information:

To study impact fatigue fracture mechanism of WC-Co cemented carbides and effects of microstructure parameters on their low cycle impact fatigue performance, impact fatigue tests were carried out for six kinds of cemented carbides with different WC grain size and Co content. And the impact fatigue fracture was observed by scanning electron microscopy. The results show that the cracks in the cemented carbides with impact loading are initiated from the powder metallurgy defects, the initiated cracks are interconnected with the holes to form the main cracks, and the rapid propagation of the main cracks leads to fatigue and failure of cemented carbides. The cemented carbide with higher Co content has greater fatigue sensitivity and shorter impact fatigue lifetime. The cemented carbide with larger WC grain size has longer impact fatigue life.

quote

GB/T 7714-2015 [1] CHEN Ding, YAO Liang, CHEN Zhen-hua, et al. Study on Low Cycle Impact Fatigue Performance of WC-Co Cemented Carbides[J]. Rare Metals and Cemented Carbides, 2017(3): 71-75.
MLA [1] CHEN Ding, et al., "Study on Low Cycle Impact Fatigue Performance of WC-Co Cemented Carbides." Rare Metals and Cemented Carbides, no. 3, 2017, pp. 71-75.
APA [1] CHEN Ding, YAO Liang, CHEN Zhen-hua, WANG Hui-ping, & PENG Wen. (2017). Study on Low Cycle Impact Fatigue Performance of WC-Co Cemented Carbides. Rare Metals and Cemented Carbides(3), 71-75.
IEEE [1] CHEN Ding, YAO Liang, CHEN Zhen-hua, WANG Hui-ping, and PENG Wen, "Study on Low Cycle Impact Fatigue Performance of WC-Co Cemented Carbides," Rare Metals and Cemented Carbides, no. 3, pp. 71-75, 2017. keywords: {cemented carbide;WC-Co;impact fatigue;fracture mechanism;WC grain size;Co content}