Effects of Laser Machining Parameters on the Quality of Micro-modeling on the End Face of Cemented Carbide Mechanical Seal Ring AITranslate
Abstract AITranslate
Micro-modeling machining experiments were carried out for an end spiral groove on YG8 cemen- ted carbide by using a lamp-pumped YAG T50 series laser marking machine. Effects of the machining pa- rameters were studied on the quality of micro-modeling including effective vector step length, effective vector step delay,Q frequency and laser current. The results show that with the increase of effective vector step length, groove depth decreases and its surface roughness increases. With the effective vector step or Q frequency increases, both groove depth and its surface roughness decrease. With laser current increases, both groove depth and its surface roughness increase. The optimal laser machining parameters for micro- modeling on cemented carbide surface are effective vector step length of 0. 001 mm,effective vector step delay of 60μs,Q frequency of 20 kHz and laser current of 16 A.
KeyWords AITranslate
1魏龙,冯秀.化工机械密封实用技术[M].北京:化学工业出版社,2011.
2Geiger M,Roth S,Becker W. Influence of laser-produced microstructures on the tribological behaviour of ceramics [-J]. Surface Coatings Technology, 1998,100-101 (1- 3) : 17-22.
3张永康,周建忠,叶云霞.激光加工技术[M].北京:国防工业出版社,2002.
4戴亚春,周建忠,王匀,马欣涛.MEMS的微细加工技术[J].机床与液压,2006,34(5):15-19. 被引量：6
5Etision I,Burstein L. A model for mechanical seals with regular microsurface structure[J]. Trib Trans, 1996,39 (3) :677-683.
6大族激光工艺培训部.激光打标技术与应用[M].深圳:深圳市大族激光科技股份有限公司,2006.
1毛文元,宋鹏云,邓强国,许恒杰.机械密封流体动压槽加工工艺技术研究进展[J].润滑与密封,2017,42(11):124-136. 被引量：7
2毛文元,宋鹏云,邓强国,许恒杰,孙雪剑.干气密封螺旋槽的激光加工工艺研究[J].工程科学与技术,2018,50(5):253-262. 被引量：9
3毛文元,宋鹏云,邓强国,许恒杰,孙雪剑.干气密封螺旋槽激光加工工艺的ACE法优化[J].工程科学与技术,2021,53(2):195-202. 被引量：3
1胡琼,王衍,戴嵘,孙见君,郑小清.基于有序微造型的圆弧线槽干气密封性能分析[J].化工学报,2019,70(3):1006-1015. 被引量：8
2吴兆山,郑国运,李香,姚黎明,丁思云,李鲲.泵用干运转机械密封的设计和试验研究[J].流体机械,2019,47(11):26-30. 被引量：5
3胡琼,朱敏俊,王衍,唐晓康,徐维聪,郑小清.具径向有序微造型的枞树型槽干气密封性能分析[J].工程科学与技术,2020,52(1):153-160. 被引量：2
4姚文博,石成江.三种气体对干气密封性能影响[J].辽宁化工,2020,49(4):433-437.
5赵永强,彭金方,蔡振兵,刘建华,杨文锦,朱旻昊.WC-Ni硬质合金密封圈损伤失效研究[J].润滑与密封,2020,45(9):30-35.
6贾谦,王建磊,崔展,杨建晨,袁小阳.引入螺旋槽制造误差的机械密封性能分析及优化[J].西安交通大学学报,2020,54(11):46-55. 被引量：4
7黄国庆,胡琼,葛云路,唐晓康,戈灿灿,王衍.基于定向微纹理效应的梯形槽干气密封性能分析[J].润滑与密封,2021,46(2):56-64. 被引量：2
8毛文元,宋鹏云,邓强国,许恒杰,孙雪剑.干气密封螺旋槽激光加工工艺的ACE法优化[J].工程科学与技术,2021,53(2):195-202. 被引量：3
9霍凤伟,张健,张成建,刘逸卓.在非接触式机械密封端面开设曲面浅槽新方法[J].重庆理工大学学报：自然科学,2021,35(8):271-278. 被引量：1
10王衍,王英尧,肖喻丰,胡琼,赵全忠,付强.基于有序造型设计的干气密封超快激光精密加工[J].材料导报,2022,36(5):40-48. 被引量：1
1刘萍萍,魏龙,谢海银.SiC的激光表面微造型工艺研究[J].锻压技术,2013,38(4):45-49. 被引量：1
2王鹤龄,张靖懿.激光加工 面向更大的市场[J].现代制造,2009(44):10-10.
3张汉元.新兴工艺—材料激光加工工艺[J].成飞情报,1990,0(4):10-18.
4大舟.激光加工工艺将突破目前的局限[J].光机电世界,1993,10(6):7-9.
5生产线中集成的激光加工设备——由激光发生器的技术进步而带来的激光加工应用范围的扩展[J].汽车制造业,2007(16):76-77.
6杨东燕,袁润,符永宏,华希俊,张宗涛,季伟.45钢表面微凹腔激光加工工艺[J].机械设计与研究,2011,27(6):72-74. 被引量：1
7王霄,陈怡星,刘会霞,刘长京,丁国民.激光微造型中烧蚀热场及弹坑的数值模拟[J].激光技术,2007,31(6):565-567. 被引量：1
8刘磊,李东波,童一飞,朱雨富.血管支架的激光加工工艺及研究进展[J].热加工工艺,2017,46(5):15-18. 被引量：4
9王玉柱,吴建.激光加工工艺在钣金行业中的应用[J].中国电梯,1994(5):15-15.
10刘建刚,秦茶,段松.45钢激光熔覆镍基合金组织及性能研究[J].河北冶金,2013(12):16-21. 被引量：4
Basic Information:
DOI：
Chinese Library Classification Number:TG135.5[一般工业技术—材料科学与工程]
Citation Information:
Micro-modeling machining experiments were carried out for an end spiral groove on YG8 cemen- ted carbide by using a lamp-pumped YAG T50 series laser marking machine. Effects of the machining pa- rameters were studied on the quality of micro-modeling including effective vector step length, effective vector step delay,Q frequency and laser current. The results show that with the increase of effective vector step length, groove depth decreases and its surface roughness increases. With the effective vector step or Q frequency increases, both groove depth and its surface roughness decrease. With laser current increases, both groove depth and its surface roughness increase. The optimal laser machining parameters for micro- modeling on cemented carbide surface are effective vector step length of 0. 001 mm,effective vector step delay of 60μs,Q frequency of 20 kHz and laser current of 16 A.
quote
| GB/T 7714-2015 | [1] LIU Ping-ping, WEI Long, XIE Hai-yin. Effects of Laser Machining Parameters on the Quality of Micro-modeling on the End Face of Cemented Carbide Mechanical Seal Ring[J]. Rare Metals and Cemented Carbides, 2013(5): 51-55. |
| MLA | [1] LIU Ping-ping, et al., "Effects of Laser Machining Parameters on the Quality of Micro-modeling on the End Face of Cemented Carbide Mechanical Seal Ring." Rare Metals and Cemented Carbides, no. 5, 2013, pp. 51-55. |
| APA | [1] LIU Ping-ping, WEI Long, & XIE Hai-yin. (2013). Effects of Laser Machining Parameters on the Quality of Micro-modeling on the End Face of Cemented Carbide Mechanical Seal Ring. Rare Metals and Cemented Carbides(5), 51-55. |
| IEEE | [1] LIU Ping-ping, WEI Long, and XIE Hai-yin, "Effects of Laser Machining Parameters on the Quality of Micro-modeling on the End Face of Cemented Carbide Mechanical Seal Ring," Rare Metals and Cemented Carbides, no. 5, pp. 51-55, 2013. keywords: {laser micro-modeling;spiral groove;cemented carbide;mechanical seal ring;machining parameter} |