Study on Hot Rolling Process of Molybdenum Plate and its Quality Control AITranslate
Abstract AITranslate
The internal structure is not dense enough and the plastic performance is low for the conventional hot rolling molybdenum plate. Therefore, the main influencing factors and control methods of the plastic performance of molybdenum plate were studied based on the rolling forming quality analysis and control. The current hot rolling process was analyzed, and improvement program was put forward and then a con- trast test was carried out. The results show that both the density and plastic performance of molybdenum plate can be obviously improved by improving hot rolling process.
KeyWords AITranslate
1杨松涛,李继文,魏世忠,徐流杰,彭光辉.纯钼及钼合金板材轧制加工工艺探讨[J].材料研究与应用,2010,4(1):60-64. 被引量：11
2巨建辉,王国栋,赵鸿磊,刘建章.我国钨钼板材加工技术装备的现状及发展趋势[J].中国钼业,2006,30(4):13-16. 被引量：17
3汪大年.金属塑性成形原理[M].北京:机械工业出版社,1985.
4张军良,李中奎,付洁,张小明.交叉轧制及退火对钼铼合金箔材深冲性能的影响[J].中国钼业,2009,33(3):32-36. 被引量：9
5Oertel C G, Huensche I,Skrotzkl W,et al. Plastic anisot ropy of straight and cross rolled molybdenum sheets[J].Materials Science and Engineering A, 2008,483-484 : 7983.
6朱爱辉,吕新矿,王快社.钼板轧制实验研究[J].中国钼业,2006,30(4):36-40. 被引量：4
1李兴民.冷冲压弯曲件质量分析与控制[J].长岭技术,2007(3):8-12. 被引量：1
2贺彤,杜鹃,刘沿东.铁素体不锈钢板材厚度方向冷轧织构演变规律[J].物理测试,2016,34(5):17-22.
3栾兆亮,闵凡启,亓杰.J55热轧板卷的质量分析与控制[J].莱钢科技,2007(4):42-45. 被引量：3
4曲贵龙,王大鹏.铰孔加工的质量分析与控制(上)[J].机械工人：冷加工,2002(1):13-14. 被引量：1
5崔肖洁.储液罐自动化焊接质量分析与控制[J].浙江海洋学院学报：自然科学版,2003,22(2):200-203.
6肖秀清.冷冲压弯曲件质量分析与控制[J].建厂科技交流,2003,30(4):34-38.
7彭明显,彭印.提高排气歧管壁厚组织致密性的探讨[J].金属加工：热加工,2010(7):73-74.
8李荣洪,杜贵江,于建国,李建京.精密冲裁件质量分析与控制[J].锻压技术,2000,25(1):23-23. 被引量：3
9赵慧俊,王宝雨,刘钢,杨雷,校文超.真空退火对TA15合金板材组织和力学性能的影响（英文）[J].中国有色金属学报：英文版,2015,25(6):1881-1888. 被引量：1
10徐颖彬,于慧林,程军风.有限元法在板材热轧中的应用[J].科技资讯,2011,9(10):108-108.
Basic Information:
DOI：
Chinese Library Classification Number:TG335.11[金属学及工艺—金属压力加工]
Citation Information:
The internal structure is not dense enough and the plastic performance is low for the conventional hot rolling molybdenum plate. Therefore, the main influencing factors and control methods of the plastic performance of molybdenum plate were studied based on the rolling forming quality analysis and control. The current hot rolling process was analyzed, and improvement program was put forward and then a con- trast test was carried out. The results show that both the density and plastic performance of molybdenum plate can be obviously improved by improving hot rolling process.
quote
| GB/T 7714-2015 | [1] SHEN Hong, DENG Yu-feng, HAO Jian. Study on Hot Rolling Process of Molybdenum Plate and its Quality Control[J]. Rare Metals and Cemented Carbides, 2012(5): 41-44. |
| MLA | [1] SHEN Hong, et al., "Study on Hot Rolling Process of Molybdenum Plate and its Quality Control." Rare Metals and Cemented Carbides, no. 5, 2012, pp. 41-44. |
| APA | [1] SHEN Hong, DENG Yu-feng, & HAO Jian. (2012). Study on Hot Rolling Process of Molybdenum Plate and its Quality Control. Rare Metals and Cemented Carbides(5), 41-44. |
| IEEE | [1] SHEN Hong, DENG Yu-feng, and HAO Jian, "Study on Hot Rolling Process of Molybdenum Plate and its Quality Control," Rare Metals and Cemented Carbides, no. 5, pp. 41-44, 2012. keywords: {molybdenum plate;hot rolling;technical parameter;quality analysis and control} |