Meso-structure Design of High-volume-fraction SiC_P/Al Composites and their Properties AITranslate
Abstract AITranslate
According to the theory of meso-structure design and using the process of high-pressure granulation and subsequent low-pressure infiltration, Al particulate-toughened SiCP-Al/Al composite are prepared, where the volume fraction of SiC in the SiCP-Al agglomerate is 62% but 55% in the whole composite. Then its mechanical properties such as hardness, strength and toughness are studied. The results show that compared with 55% SiCP/Al common composite, the fracture toughness of SiCP-Al/Al composite increases slightly and the hardness increases by 50 % ;compared with 62 % SiCP/Al common composite, the fracture toughness improves by 33.7%.
KeyWords AITranslate
1Hyo S L, Hong S H. Pressure infiltration casting process and thermophysical properties of high volume fraction SiCp/AI metal matrix composites[J]. Mater Sci Tech, 2003,19(8):1 057-1 066.
2向华,曲选辉,肖平安,李乐思.SiCp/Al电子封装复合材料的现状和发展[J].材料导报,2003,17(2):54-57. 被引量：14
3崔岩.碳化硅颗粒增强铝基复合材料的航空航天应用[J].材料工程,2002,30(6):3-6. 被引量：221
4Chena Z Z,Tokajib K. Effects of particle size on fatigue crack initiation and small crack growth in SiC particulate -reinforced aluminium alloy composites[J]. Mater Let, 2004,58(17-18) :2 314-2 321.
5秦蜀懿,张国定.改善颗粒增强金属基复合材料塑性和韧性的途径与机制[J].中国有色金属学报,2000,10(5):621-629. 被引量：54
6Qin Shuyi, Zhang Guoding, Wang Wenlong. Fabrication and fracture toughness of macro-toughening-designed composite[J].Trans Nonferrous Met Soc China, 1999,9 (4) :728-732.
7李献民,崔建忠,胡宗式,李梅,陈东琴.金属层状复合材料的超塑变形行为[J].材料导报,2000,14(8):64-65. 被引量：1
8Tszeng T C. The effects of particle clustering on the mechanical behavior of particle reinforced composites[J]. Composites Part B,1998,29B(3):299-308.
9Pandey A B, Majumdar B S, Miracle D B. Effect of aluminum particles on the fracture toughness of a 7093/ SiC/15p compositeEJ]. Mater Sci & Eng, 1999, A259 (2) :296-307.
1李俐群,左智成,陶汪,姜龙涛.高比分SiC_p/2024铝基复合材料激光原位焊接头断裂行为[J].焊接学报,2012,33(4):61-64. 被引量：12
1李卓然,冯广杰,徐慨,张相龙.Al-Ni-CuO中间层自蔓延连接C_f/Al与TiAl接头的微观形貌及其形成机制[J].焊接学报,2013,34(7):9-12. 被引量：2
2陈国庆,张秉刚,甄公博,何俊,冯吉才.SiC_p/Al复合材料电子束焊接接头组织及性能[J].焊接学报,2013,34(7):73-76. 被引量：7
3宋学成,夏佩云,封小松,崔凡,郭立杰.2024铝合金与SiC_P/Al复合材料搅拌摩擦焊搭接温度场模拟研究[J].热加工工艺,2014,43(21):155-157. 被引量：2
4刘骏,周广涛,陈聪彬,牛济泰.SiC_p/Al激光诱导钎焊接头界面行为及性能[J].焊接学报,2015,36(8):43-46. 被引量：2
5宋学成,封小松,赵慧慧,郭立杰.特殊对接形式下SiC_P/Al复合材料与铝合金搅拌摩擦焊的组织与力学性能[J].焊接学报,2015,36(11):73-76.
6王鹏,徐冬霞,程东锋,王东斌,牛济泰.连接SiCp/6063Al复合材料的Al-Si-Cu-Ce-Ti箔状钎料制备及其性能研究[J].材料导报,2016,30(20):89-93. 被引量：1
7张泽群,黄煜华,檀财旺,陈波,李俐群,冯吉才.Sip/Al复合材料激光填丝钎焊工艺[J].电焊机,2017,47(1):26-30. 被引量：1
8王博,赖小明,易卓勋,张凯锋.脉冲电流辅助粉末夹层TLP连接SiC_p/Al接头微观组织和力学性能[J].航空材料学报,2017,37(3):44-49.
9王鹏,高增,程东锋,牛济泰.高体积比SiCp/A356复合材料真空扩散钎焊接头组织与性能研究[J].材料导报,2017,31(22):75-78. 被引量：2
10牛济泰,程东锋,高增,王鹏.SiC颗粒增强铝基复合材料的连接现状[J].焊接学报,2019,40(3):155-160. 被引量：10
1杨庆生,杨卫,陈浩然,唐立民.复合材料的宏观性能与参数设计[J].力学与实践,1996,18(3):1-7. 被引量：9
2邹春红,徐志锋,王振军,余欢.连续C_f/Al复合材料碳纤维SiC涂层研究进展[J].特种铸造及有色合金,2013,33(5):429-432. 被引量：2
3刘政,朱应禄,陈慈诰.低压浸渗Preform制备Al_2O_3/Zn合金复合材料[J].南方冶金学院学报,1993,14(4):358-364. 被引量：1
4V．Kevorkijan,程祥宇,张存信,龙文元.用多孔陶瓷预制件浸渗法制造Mg AZ80／SiC复合材料棒[J].国外金属加工,2005,26(3):38-46.
5许晓静,戈晓岚.SiC晶须增强铝基复合材料超塑性[J].复合材料学报,2003,20(3):127-131. 被引量：11
6于家康,周尧和.混杂Cf／SiCp／Al复合材料的低压浸渗[J].西北工业大学学报,1999,17(B12):90-93.
7沈理达,王东生,黄因慧,田宗军,花国然.Al_2O_3-TiO_2纳米团聚颗粒及其激光烧结体微观形貌[J].机械工程材料,2008,32(10):40-43. 被引量：1
8单宝峰,张继宇,方昆凡.振动流化床造粒中产品成粒率的研究[J].机械设计与制造,1996(2):35-37.
9李智敏,周万城,苏晓磊,黄云霞,李桂芳.富碳β-SiC的燃烧法合成及微波介电性能[J].稀有金属材料与工程,2009,38(A02):9-12. 被引量：1
10张剑平,张萌,艾云龙,左红艳,何文.TiB_2含量对微波烧结TiB_2/Cu复合材料组织和磨损性能的影响[J].材料热处理学报,2013,34(5):25-29. 被引量：4
Basic Information:
DOI：
Chinese Library Classification Number:TB333[一般工业技术—材料科学与工程]
Citation Information:
According to the theory of meso-structure design and using the process of high-pressure granulation and subsequent low-pressure infiltration, Al particulate-toughened SiCP-Al/Al composite are prepared, where the volume fraction of SiC in the SiCP-Al agglomerate is 62% but 55% in the whole composite. Then its mechanical properties such as hardness, strength and toughness are studied. The results show that compared with 55% SiCP/Al common composite, the fracture toughness of SiCP-Al/Al composite increases slightly and the hardness increases by 50 % ;compared with 62 % SiCP/Al common composite, the fracture toughness improves by 33.7%.
quote
| GB/T 7714-2015 | [1] FANG Ling, ZHANG Xiao-lian, CHEN Kang-hua. Meso-structure Design of High-volume-fraction SiC_P/Al Composites and their Properties[J]. Rare Metals and Cemented Carbides, 2009(2): 22-25. |
| MLA | [1] FANG Ling, et al., "Meso-structure Design of High-volume-fraction SiC_P/Al Composites and their Properties." Rare Metals and Cemented Carbides, no. 2, 2009, pp. 22-25. |
| APA | [1] FANG Ling, ZHANG Xiao-lian, & CHEN Kang-hua. (2009). Meso-structure Design of High-volume-fraction SiC_P/Al Composites and their Properties. Rare Metals and Cemented Carbides(2), 22-25. |
| IEEE | [1] FANG Ling, ZHANG Xiao-lian, and CHEN Kang-hua, "Meso-structure Design of High-volume-fraction SiC_P/Al Composites and their Properties," Rare Metals and Cemented Carbides, no. 2, pp. 22-25, 2009. keywords: {high- volume- fraction SiCP / Al composite;meso- struct ure design;SiC agglomerated particle;Al particulate toughening} |