daohang fenxiangbox searchbox qikanlogonew daohangnew searchboxnew navrightzone footerzone paper

Effects of Quenching Rate on Microstructure and Electrochemical Performance of Rare Earth Mg-based Alloy AITranslate

School of Quality and Technical Supervision of Hebei University;School of Quality and Technical Supervision of Hebei University;School of Quality and Technical Supervision of Hebei University;School of Quality and Technical Supervision of Hebei University;School of Quality and Technical Supervision of Hebei University;School of Quality and Technical Supervision of Hebei University
AITranslate
Publisher: Editorial Office of Rare Metals and Cemented Carbides
Share Citation Information Add to Favorites

    Scan to share on WeChat or Moments

Use WeChat scan.
Share with WeChat friends or Moments

Abstract AITranslate

Mg0.25Ni3.5Co0.2 alloy was prepared by melt rapid quenching technology. The microstructure of the alloy was analyzed by SEM and XRD, and its electrochemical performance was tested with electrochemical method. The results show that the quenched alloy has multiphase structure,increased main diffraction peak FWHM and micro-strain, obviously refined grains and larger area of columnar crystal zone. With the increase of quenching rate, discharge capacity of the alloy decreases, medium potential of discharge plateau and open-circuit potential positively shift, and cycling stability is enhanced.

KeyWords AITranslate

rare earth Mg-based alloy melt rapid quenching technology electrode quenching rate electrochemical performance microstructure

1Qin M, Lan Z Q, Ding Y, et al. A study on hydrogen storage and electrochemical properties of La0. ss Pro. 0s Ndo.~Mgo. zsNi3.5 (Coo. s A10.5)~ (x=0.0,0. 1,0.3,0.5)alloys[J] Journal of Rare Earths, 2012,30(3) : 222-227.

2Dong X P, Zhang Y H, Lia F X, et al. Investigation on microstructures and electrochemical performances of La0. 75 Mg0.25 Nia. 5 Cos (x - 0 ~ 0. 6 ) hydrogen storage alloys [J]. International Journal of Hydrogen Energy, 2007,32(18) :4 949-4 956.

3Zhang Y H, Cai Y, Zhao C, et al. Electrochemical performances of the as-melt La0.75 x M~ Mg0.2s Ni3.2 Co0.2A10.~ (M=Pr,Zr;.r-0,0.2) alloys applied to Ni/ metal hydride (MH) battery[J]. International Journal of Hydrogen Energy,2012,37(19) :14 590-14 597.

4崔大田,王志法.快速凝固新型Au-Ag-Ge合金薄带的制备[J].材料热处理学报,2010,31(1):40-43. 被引量:8

5向青春,周彼德,李荣德.快速凝固过程中熔液自旋工艺的比较[J].特种铸造及有色合金,2000(3):46-49. 被引量:8

6崔忠祈,谭耀春.金属学与热处理(第2版)[M].北京:机械工业出版社,2013.

7Nakano H, Wakao S, Shimizu T. Correlation between crystal structure and electrochemical properties of C14 Laves-phase alloys [ J 1. Journal of Alloys and Compounds, 1997,253-254 .. 609-612.

8Liu Y F,Cao Y H,Pan H G,etal. Rare earth-Mg Ni- based hydrogen storage alloys as negative electrode materials for Ni/MH batteries[J~. Journal of Alloys and Compounds,2011,509(3) :675 686.

1李传键,王新林.Mm(NiMnTiCo)_5贮氢合金的制备工艺、电化学性能及相结构研究[J].中国稀土学报,1998,16(4):343-347. 被引量:16

2马帅,林红旗,李锐,潘洪革.新型稀土镁基储氢电极合金的电化学性能研究[J].中国材料科技与设备,2006,3(6):80-83.

3张甫飞.非晶产业的现状与展望[J].金属材料研究,2005,31(4):39-43.

4路鹏.谈非晶合金材料特点及应用[J].科技创新与应用,2011(19):31-31. 被引量:1

5张羊换,杨泰,卜文刚,蔡颖,张国芳,赵栋梁.Nd含量对快淬纳米晶和非晶(Mg_(24)Ni_(10)Cu_2)_(100-x)Nd_x(x=0~20)合金电化学性能的影响(英文)[J].中国有色金属学报:英文版,2013,23(12):3668-3676. 被引量:8

6郭世海,张羊换,王国清,祁焱,全白云,王新林.淬速对Ni-Mn-Ga快淬合金相变的影响[J].中国有色金属学报,2005,15(11):1755-1760. 被引量:6

7董小平,刘生龙,杨丽颖,王翠表,陈家熠,张羊换.熔体快淬对A_2B_7型La_(0.8)Mg_(0.2)Ni_(3.5)Co_(0.2)合金结构及电化学性能的影响[J].材料热处理学报,2014,35(4):1-6. 被引量:2

8郭世海,张羊换,李健靓,祁焱,全白云,王新林.Ni_(50)Mn_(27)Ga_(23)快淬薄带的马氏体相变和磁感生应变[J].稀有金属材料与工程,2005,34(8):1217-1220. 被引量:3

9任江远,张羊换,董小平,冯猛,韩晓英,王新林.快淬无钴AB_5型贮氢合金研究进展[J].金属功能材料,2005,12(5):28-31.

10卢其云,唐仁衡,王英,肖方明.La_2Mg_(17)稀土镁基储氢合金制备工艺及储氢性能研究[J].材料研究与应用,2012,6(1):38-40.

Basic Information:

DOI:

Chinese Library Classification Number:TG146.45[金属学及工艺—金属材料]

Citation Information:

Mg0.25Ni3.5Co0.2 alloy was prepared by melt rapid quenching technology. The microstructure of the alloy was analyzed by SEM and XRD, and its electrochemical performance was tested with electrochemical method. The results show that the quenched alloy has multiphase structure,increased main diffraction peak FWHM and micro-strain, obviously refined grains and larger area of columnar crystal zone. With the increase of quenching rate, discharge capacity of the alloy decreases, medium potential of discharge plateau and open-circuit potential positively shift, and cycling stability is enhanced.

quote

GB/T 7714-2015 [1] DONG Xiao-ping, LIU Sheng-long, CHEN Jia-yi, et al. Effects of Quenching Rate on Microstructure and Electrochemical Performance of Rare Earth Mg-based Alloy[J]. Rare Metals and Cemented Carbides, 2014(2): 54-58.
MLA [1] DONG Xiao-ping, et al., "Effects of Quenching Rate on Microstructure and Electrochemical Performance of Rare Earth Mg-based Alloy." Rare Metals and Cemented Carbides, no. 2, 2014, pp. 54-58.
APA [1] DONG Xiao-ping, LIU Sheng-long, CHEN Jia-yi, YANG Li-ying, WANG Cui-biao, & ZHANG Yang-huan. (2014). Effects of Quenching Rate on Microstructure and Electrochemical Performance of Rare Earth Mg-based Alloy. Rare Metals and Cemented Carbides(2), 54-58.
IEEE [1] DONG Xiao-ping, LIU Sheng-long, CHEN Jia-yi, YANG Li-ying, WANG Cui-biao, and ZHANG Yang-huan, "Effects of Quenching Rate on Microstructure and Electrochemical Performance of Rare Earth Mg-based Alloy," Rare Metals and Cemented Carbides, no. 2, pp. 54-58, 2014. keywords: {rare earth Mg-based alloy;melt rapid quenching technology;electrode;quenching rate;electrochemical performance;microstructure}