Research on Phase Ingredient of WO_3 During Reduction AITranslate
Abstract AITranslate
The paper describes the influence of phase ingredient on particle pattern of W-powder during reduction of WO_3(770～900 ℃).The research results showed that among β-tungsten oxide(WO2.9)?γ-tungsten Oxide(WO2.72)and WO_2,γ-tungsten oxide(WO2.72)has the biggest influence on particle pattern of W-powder,WO_2 has the least influence on particle pattern of W-powder,while influence of β-tungsten Oxide(WO2.9)is in the medium level of the three.
KeyWords AITranslate
1李洪桂.稀有金属冶金学[M].北京:冶金工业出版社,1993..
2戴艳阳,钟晖,李荐,钟海云,刘志坚.细颗粒紫钨的制备[J].稀有金属,2002,26(5):405-408. 被引量：8
3陈响明,施超波,易丹青.紫钨生产的亚微米级钨粉和碳化钨粉的形貌[J].硬质合金,2002,19(2):65-69. 被引量：18
4黄忠耿.蓝钨氢还原制取钨粉[J].稀有金属与硬质合金,1997,25(1):57-60. 被引量：9
5廖寄乔,王华.氧化钨物理特征的测量[J].理化检验：物理分册,2002,38(5):197-201. 被引量：1
6廖寄乔,黄志锋,吕海波,陈绍衣,邹志强.不同氧化钨氢还原制取超细钨粉[J].中南工业大学学报,2000,31(1):51-55. 被引量：27
7占志泽.蓝色氧化钨、金属钨粉和碳化钨粉[J].江西冶金,1997,17(5):61-62. 被引量：2
1张国珍,张利平,王澈,张久兴,周美玲,钟涛兴.氧化钨直接碳化SPS原位合成WC的反应过程[J].稀有金属材料与工程,2005,34(11):1743-1746. 被引量：8
2张秋和,刘辉明,范景莲,孙忍安,田家敏,游锋.仲钨酸铵直接还原钨粉的制备工艺研究[J].中国钨业,2008,23(5):30-33. 被引量：9
3高观金.仲钨酸铵煅烧温度对金属W粉性能的影响[J].粉末冶金材料科学与工程,2010,15(6):656-660. 被引量：2
4刘原,唐建成,雷纯鹏,叶楠,卓海鸥.氧化钨还原过程及机理研究[J].粉末冶金工业,2012,22(4):26-29. 被引量：8
5辛延君,郭志猛,罗骥,王瑞欣,方哲成.仲钨酸铵还原制备超粗球形钨粉[J].北京科技大学学报,2013,35(3):352-357. 被引量：1
6付代轩.煅烧温度对射孔弹药型罩用金属钨粉性能的影响[J].测井技术,2015,39(5):669-672.
7宋翰林,姜平国,刘文杰,汪正兵.氧化钨氢还原动力学的研究进展[J].有色金属科学与工程,2017,8(5):64-69. 被引量：6
8姜春辉.装舟量及还原时间对氧化钨物相形貌的影响[J].福建冶金,2019,48(2):35-37.
9江嘉鹭,王海燕,张晓丹,刘超,郑子龙.工业氧化钨相状态的Rietveld分析[J].硬质合金,2023,40(4):302-309.
1张久兴,张国珍,张利平,王澈,宋晓艳,周美玲,钟涛兴.氧化钨/碳SPS原位合成WC硬质合金的XPS研究[J].稀有金属材料与工程,2006,35(6):937-940. 被引量：4
2罗崇玲,易茂中,谭兴龙,戴煜.新型直接碳化法制备超细WC粉及其烧结体的结构与性能[J].粉末冶金技术,2007,25(4):243-246. 被引量：8
3张彩霞,周阳.高性能超细钨粉的制备工艺研究[J].上海有色金属,2010,31(4):189-193. 被引量：2
4谢中华,张秋和,王文华,陈树茂.钨粉制备工艺对压坯强度影响的研究[J].中国钨业,2010,25(6):28-30. 被引量：9
5何利民,唐三川.直接还原碳化法制备超细WC粉体研究[J].矿冶工程,2011,31(4):109-112. 被引量：1
6胡驰,周大利,罗宇智.H_2W_3O_(10)对溶胶-凝胶法制备纳米WC的影响[J].热加工工艺,2011,40(16):93-95. 被引量：1
7辛延君,郭志猛,李艳军,吴成义.仲钨酸铵(APT)中温还原制取粗晶钨粉[J].超硬材料工程,2011,23(2):31-35. 被引量：2
8胡驰,周大利,熊仁金,罗宇智,何宇.纳米WC的合成及Pt/WC电催化性能的研究[J].无机材料学报,2011,26(11):1152-1156. 被引量：3
9胡驰,唐子雷,吴健春.制备纳米WC的热力学分析[J].热加工工艺,2012,41(12):44-46. 被引量：2
10张湘.直接碳化技术制备碳化钨粉的研究[J].硬质合金,2013,30(2):73-78. 被引量：2
1李裕芳,赖道玉.用仲钨酸铵制取钨粉过程中各工序的粒度变化[J].中国钨业,1990(2):14-18.
2刘国喜,穆晓辉,董华.废钨粉的回收与利用[J].中国金属通报,2003,0(46):28-17.
3耿日君.黑钨渣熔盐淬取试验的问题浅析[J].铁合金,1998,29(4):18-22.
4专利题录和文摘[J].中国钨业,1992(6):35-36.
5傅小明,吴晓东.紫钨还原过程相成分探讨[J].湖南冶金,2003,31(6):24-26. 被引量：9
6吕文广.硬质合金废料的回收处理方法[J].中国钨业,1992(9):38-38.
7傅小明.蓝钨还原钨粉过程相成分探讨[J].上海有色金属,2004,25(4):149-152. 被引量：7
8姚毅.硫酸镓铵法生产高纯氧化镓实验[J].山东冶金,2016,38(4):44-45.
Basic Information:
DOI：
Chinese Library Classification Number:TF841.1[冶金工程—有色金属冶金]
Citation Information:
The paper describes the influence of phase ingredient on particle pattern of W-powder during reduction of WO_3(770～900 ℃).The research results showed that among β-tungsten oxide(WO2.9)?γ-tungsten Oxide(WO2.72)and WO_2,γ-tungsten oxide(WO2.72)has the biggest influence on particle pattern of W-powder,WO_2 has the least influence on particle pattern of W-powder,while influence of β-tungsten Oxide(WO2.9)is in the medium level of the three.
quote
| GB/T 7714-2015 | [1] FU Xiao-ming, WU Xiao-dong. Research on Phase Ingredient of WO_3 During Reduction[J]. Rare Metals and Cemented Carbides, 2003(4): 7-9. |
| MLA | [1] FU Xiao-ming, and WU Xiao-dong. "Research on Phase Ingredient of WO_3 During Reduction." Rare Metals and Cemented Carbides, no. 4, 2003, pp. 7-9. |
| APA | [1] FU Xiao-ming, & WU Xiao-dong. (2003). Research on Phase Ingredient of WO_3 During Reduction. Rare Metals and Cemented Carbides(4), 7-9. |
| IEEE | [1] FU Xiao-ming and WU Xiao-dong, "Research on Phase Ingredient of WO_3 During Reduction," Rare Metals and Cemented Carbides, no. 4, pp. 7-9, 2003. keywords: {WO_3;β-tungsten oxide;γ-tungsten oxide;WO_2 hydrogen reduction;phase ingredient;particle mophology} |