daohang fenxiangbox searchbox qikanlogonew daohangnew searchboxnew navrightzone footerzone paper
English
Chinese 简体中文 English English
Home > Journals > Rare Metals and Cemented Carbides
‹ Previous Article Next Article ›

Comparison and Suggestions of Treatment Process of Copper Anode Slime AITranslate

XIONG Jia-chun; ZHU Mao-lan; ZHONG Shui-ping; WANG Rui-xiang; ZHANG Huan-ran; WANG Jun-e; SU Xiu-zhu
School of Metallurgy and Chemistry Engineering, Jiangxi University of Technology;School of Metallurgy and Chemistry Engineering, Jiangxi University of Technology;School of Metallurgy and Chemistry Engineering, Jiangxi University of Technology;School of Metallurgy and Chemistry Engineering, Jiangxi University of Technology;School of Metallurgy and Chemistry Engineering, Jiangxi University of Technology;School of Metallurgy and Chemistry Engineering, Jiangxi University of Technology;School of Metallurgy and Chemistry Engineering, Jiangxi University of Technology
AITranslate
Publisher: Editorial Office of Rare Metals and Cemented Carbides
Share Citation Information Add to Favorites

    Scan to share on WeChat or Moments

Use WeChat scan.
Share with WeChat friends or Moments

Abstract AITranslate

Introduction is made of Kaldor furnace process,semi-hydrometallurgical process and hydrometallurgical process widely applied for copper anode slime treatment at home and abroad.these processes are compared from process flowsheet,enrichment direction of main impurities and main existing problems,and then some suggestions are proposed on selection of copper anode slime treatment processes,and the future development direction is also pointed out.

KeyWords AITranslate

copper anode slime Kaldor furnace process semi-hydrometallurgical process hydrometallurgical process suggestion and prospect

1邱光文,徐远志.高银铜阳极泥湿法处理流程研究[J].有色金属设计,2000,27(2):19-24. 被引量：18

2侯慧芬.从铜阳极泥中综合回收重有色金属和稀、贵金属[J].上海有色金属,2000,21(2):88-93. 被引量：22

3王小龙,张昕红.铜阳极泥处理工艺的探讨[J].矿冶,2005,14(4):46-48. 被引量：39

4简锡明,谢永金.卡尔多炉处理铜阳极泥工艺评述[J].有色金属：冶炼部分,2014(10):20-23. 被引量：32

5王海荣.竖炉还原卡尔多炉熔炼渣的试验研究[J].中国有色冶金,2012,41(4):63-66. 被引量：12

6陈志刚.采用Kaldo炉从阳极泥中提取稀贵金属[J].中国有色冶金,2008,37(6):43-45. 被引量：22

7邓成虎.贵冶铜阳极泥处理扩建设计与生产实践[J].铜业工程,2011(1):31-34. 被引量：5

8夏彬.铜阳极泥稀贵金属回收工艺及优化[J].铜业工程,2011(3):34-37. 被引量：18

1宁瑞,李伟,刘志中.铜阳极泥处理工艺对比及建议[J].金属材料与冶金工程,2018,46(6):42-47. 被引量：11

2汤小群,张世金,毛龙满.铜阳极泥回收金银生产工艺及污染防治措施分析[J].江西化工,2017,33(5):103-108. 被引量：3

3刘敬师,董广刚.铜电解阳极泥脱铜生产实践及工艺优化[J].铜业工程,2018(2):60-62. 被引量：4

4李华健,刘秉国,宇文超,刘鹏,胡婷.响应曲面法优化微波硫酸化焙烧铜阳极泥脱硒[J].矿冶,2019,28(3):54-59. 被引量：7

5谢铿,王海北,刘三平,李达,薛宇飞.铜阳极泥氯化浸金液连续萃铜试验[J].矿冶,2019,28(5):55-61.

6韩俊红,陈燕珠,徐斌,董中林.铜阳极泥综合回收试验研究[J].矿冶工程,2020,40(3):91-94. 被引量：4

7徐娟,张福元,丁丁.铂钯精矿中氯化银的浸出预处理研究[J].贵金属,2020,41(3):1-7.

8张福元,徐娟,赵卓,郑雅杰.沉金后液中金、铂、钯、碲的组态特征及其碲捕集稀贵金属机制[J].稀有金属,2021,45(2):217-225. 被引量：2

9王宇宁,邱建森,葛素志,李涛.铜阳极泥卡尔多炉前端处理工艺优化研究[J].有色冶金设计与研究,2022,43(5):5-8.

10高宇,和晓才,韩庆,施辉献,徐庆鑫.从铜阳极泥浮选尾矿中高效浸出金、银试验研究[J].湿法冶金,2023,42(4):335-340.

1王军正,刘平,赵景龙.铜阳极泥常压氧化脱铜研究[J].大众科技,2019,21(5):53-54. 被引量：3

2廖春发,彭珊,邹耕,曾颜亮.基于RSM超声波-微波协同氧化浸出铜阳极泥分铜渣中碲的研究[J].稀有金属与硬质合金,2020,48(2):10-17. 被引量：4

3叶钟林,李玉东,许波.铜阳极泥综合回收的技术经济分析[J].云南冶金,2020,49(4):73-77.

4韩俊红,陈燕珠,徐斌,董中林.铜阳极泥综合回收试验研究[J].矿冶工程,2020,40(3):91-94. 被引量：4

5陈雅婷,杨鸿,丁磊.双顶吹铜冶炼工艺金银分配及走向研究[J].云南冶金,2020,49(5):41-44. 被引量：2

6谢祥添,徐星然,赵燕燕,张耀峰.铜阳极泥硒回收率的提高与生产实践[J].铜业工程,2020(6):64-66. 被引量：1

7张福元,张金池,张广安,赵卓.铜阳极泥分铜液综合回收稀贵金属[J].化工进展,2021,40(3):1681-1688. 被引量：1

8苏峰,余林花.电解净液工艺处理铜阳极泥浸出液的生产实践及优化[J].中国有色冶金,2021,50(1):14-18.

9张二军,肖芬.采用加盐氧化焙烧—硫酸浸出工艺从铜阳极泥中回收铜和银[J].湿法冶金,2021,40(2):106-109. 被引量：6

10房孟钊.从铜阳极泥中提取银的工艺研究现状[J].硫磷设计与粉体工程,2021(3):4-9. 被引量：7

1李春侠,王爱荣,陈继平.铜阳极泥处理半湿法工艺与卡尔多炉工艺的比较[J].企业技术开发,2015,34(7):28-30. 被引量：4

2刘招平.铜冶炼阳极泥综合回收工艺的设计与经济性分析[J].化学工程与装备,2015(10):246-250. 被引量：1

3梁帅表.氧气斜吹旋转转炉处理铜阳极泥的工艺设计[J].中国有色冶金,2011,40(4):11-14. 被引量：1

4李雪娇,杨洪英.高镍铜阳极泥和高铅铜阳极泥特征对比研究[J].有色冶金节能,2013,28(3):12-15. 被引量：1

5李仲文.铜阳极泥处理湿法工艺改造[J].有色冶炼,1999,28(4):15-17. 被引量：4

6胡一平.铜阳极泥处理工艺的选择[J].云南冶金,2015,44(4):34-38. 被引量：5

7马进,何国才,程亮,鲁兴武,易超.湿法炼锌净化镍钴渣全湿法回收新工艺[J].有色金属：冶炼部分,2013(12):11-14. 被引量：16

8宣善伦.铜阳极泥处理工艺的改进实践[J].黄金,2007,28(2):39-41. 被引量：4

9陈志华.大冶铜阳极泥处理工艺的改进实践[J].中国有色冶金,2011,40(1):19-21. 被引量：9

10王小龙,张昕红.铜阳极泥处理工艺的探讨[J].矿冶,2005,14(4):46-48. 被引量：39

Basic Information:

DOI：

Chinese Library Classification Number:TF811[冶金工程—有色金属冶金]

Citation Information:

Introduction is made of Kaldor furnace process,semi-hydrometallurgical process and hydrometallurgical process widely applied for copper anode slime treatment at home and abroad.these processes are compared from process flowsheet,enrichment direction of main impurities and main existing problems,and then some suggestions are proposed on selection of copper anode slime treatment processes,and the future development direction is also pointed out.

quote

GB/T 7714-2015 [1] XIONG Jia-chun, ZHU Mao-lan, ZHONG Shui-ping, et al. Comparison and Suggestions of Treatment Process of Copper Anode Slime[J]. Rare Metals and Cemented Carbides, 2017(1): 26-30.
MLA [1] XIONG Jia-chun, et al., "Comparison and Suggestions of Treatment Process of Copper Anode Slime." Rare Metals and Cemented Carbides, no. 1, 2017, pp. 26-30.
APA [1] XIONG Jia-chun, ZHU Mao-lan, ZHONG Shui-ping, WANG Rui-xiang, ZHANG Huan-ran, WANG Jun-e, & SU Xiu-zhu. (2017). Comparison and Suggestions of Treatment Process of Copper Anode Slime. Rare Metals and Cemented Carbides(1), 26-30.
IEEE [1] XIONG Jia-chun, ZHU Mao-lan, ZHONG Shui-ping, WANG Rui-xiang, ZHANG Huan-ran, WANG Jun-e, and SU Xiu-zhu, "Comparison and Suggestions of Treatment Process of Copper Anode Slime," Rare Metals and Cemented Carbides, no. 1, pp. 26-30, 2017. keywords: {copper anode slime;Kaldor furnace process;semi-hydrometallurgical process;hydrometallurgical process;suggestion and prospect}