Analysis of the Causes for Non-correspondence of Fisher Particle Size of Ultrafine WC Powder to WC Grain Size of Ultrafine Cemented Carbide AITranslate
Abstract AITranslate
The ultrafine cemented carbides were prepared with ultrafine WC powders synthesized with two different methods. Meanwhile, the causes of non-correspondence of Fisher particle size of ultrafine WC powder to WC grain size of ultrafine cemented carbide were analyzed from the two respects of the aggregates and sintering necks of WC powders. The results show that existence of aggregates and sintering necks can result in the deviation between Fisher particle size and primary particle size of WC powder. In ad- dition,the WC grains grow on the primary particles and therefore the deviation develops between actual WC grain size of cemented carbide and that predicted by Fisher particle size of WC powder.
KeyWords AITranslate
1汪中玮,张卫兵,周华堂.超细硬质合金生产过程中的质量控制[J].粉末冶金技术,2007,25(4):284-288. 被引量：14
2张荆门.硬质合金工业的进展(1)[J].粉末冶金技术,2002,20(3):140-146. 被引量：24
3邬荫芳.“双高”超细合金的研制[J].硬质合金,2000,17(4):214-220. 被引量：37
4Karin Mannesson,Mattias Elfwing,Alexandra Kusoffsky,Susanne Norgren,John ?gren.Analysis of WC grain growth during sintering using electron backscatter diffraction and image analysis[J].International Journal of Refractory Metals and Hard Materials.2007(5)
5Vineet Kumar,Zhigang Zak Fang,S. I. Wright,M. M. Nowell.An analysis of grain boundaries and grain growth in cemented tungsten carbide using orientation imaging microscopy[J].Metallurgical and Materials Transactions A.2006(3)
6Mikael Christensen,G?ran Wahnstr?m.Effects of cobalt intergranular segregation on interface energetics in WC–Co[J].Acta Materialia.2004(8)
7Delano?, Aurélie,Lay, Sabine.Evolution of the WC grain shape in WC-Co alloys during sintering: Effect of C content[].International Journal of Refractory Metals and Hard Materials.2009
1贺鸣,于涛,周红翠.EBSD技术在WC粉末晶粒度测量上的应用[J].硬质合金,2018,35(5):358-365. 被引量：5
2尹超,张卫兵,谢晨辉,陆必志.原始WC粉末粒度组成对超细硬质合金组织及性能的影响[J].硬质合金,2017,34(1):7-13. 被引量：5
3周红翠,于涛,贺鸣.WC原料的多晶结构对合金组织及性能的影响[J].硬质合金,2018,35(4):249-257. 被引量：5
4毛善文,尹超.原始WC粉末粒度分布及球磨时间对超细硬质合金微观结构的影响[J].硬质合金,2019,36(2):126-134. 被引量：8
1颜新宇,王守仁,王勇.碳化钨基硬质合金的制备与力学性能研究[J].山东科学,2018,31(3):28-33. 被引量：1
2周红翠,于涛,贺鸣.WC原料的多晶结构对合金组织及性能的影响[J].硬质合金,2018,35(4):249-257. 被引量：5
3刘觐,易志强,张琳,黄红华,谭敦强,陆磊.化学沉淀法制备超细仲钨酸铵粉末的研究[J].江西科学,2019,37(3):405-408. 被引量：2
4张湘.碳化温度对超细WC粉末性能与合金性能的影响[J].硬质合金,2019,36(5):361-367. 被引量：4
5张璐,陆必志,徐涛.超细碳化钨制备关键技术及评价方法研究的新进展[J].硬质合金,2019,36(6):460-471. 被引量：13
6张华民,蒋福海.硬质合金研磨体形状和规格对中颗粒碳化钨粉末研磨效果的影响[J].稀有金属与硬质合金,2020,48(2):90-95. 被引量：1
7张华民,项培云,蒋福海.粉碎方式对细颗粒碳化钨性能的影响[J].四川冶金,2020,42(4):32-36. 被引量：1
8付胜,张立,陈焕涛,戴湘平.亚微和超细碳化钨粉末的质量缺陷与粒度表征[J].中国钨业,2020,35(6):1-7. 被引量：3
9赵海涛,姜彤.电子背散射衍射技术在热模拟压缩研究中的应用[J].沈阳理工大学学报,2021,40(2):61-66.
10冯志,程登峰,黎明华,刘娜娜,朱福明.碳化配碳量对粗颗粒WC粉末形貌及WC-8%Co合金性能的影响[J].硬质合金,2021,38(3):171-178.
1张卫兵,颜练武,赵声志,杜承功.超细WC粉末微观缺陷的研究[J].硬质合金,2012,29(5):283-288. 被引量：9
2施明友.YK15硬质合金棒材的研制[J].江西冶金,1995,15(3):19-20.
3张焜,冯娟妮,黄晓玲.钼粉分级和配比对烧结钼板坯轧制性能的影响[J].中国钨业,2015,30(3):52-57. 被引量：4
4罗锴,陈强,蔡一湘.放电等离子烧结制备超细碳化钨材料[J].材料研究与应用,2010,4(4):534-537. 被引量：6
5马运柱,黄伯云,范景莲,熊翔,魏定池,汪登龙.La对氢还原(W,Ni,Fe)复合氧化物粉末特性的影响[J].中南大学学报：自然科学版,2004,35(4):523-526. 被引量：1
6BernhardWittmann,邱智海,佘建芳.以镍和铁为粘结相的硬质合金中WC晶粒长大及其抑制[J].国外难熔金属与硬质材料,2004,20(1):6-15.
7梅文强,刘志国,郭名亮,朱启伟,郭华彬.特粗WC颗粒的制备方法研究[J].金属功能材料,2012,19(4):25-29. 被引量：1
8郑虎春,范景莲,杨文华,张忠健,刘涛.VC/Cr_3C_2及配碳量对WC-0.5Co超细硬质合金组织与性能的影响[J].稀有金属材料与工程,2015,44(4):912-917. 被引量：6
9郑汉书,熊震,邵刚勤,段兴龙.超细碳化钨粉末掺量对合金刀头相结构和力学性能的影响[J].机电产品开发与创新,2006,19(2):17-18.
10张益中.碳化工艺对固溶体及合金性能的影响[J].硬质合金,2011,28(1):38-43. 被引量：2
Basic Information:
DOI：
Chinese Library Classification Number:TG135.5[一般工业技术—材料科学与工程]
Citation Information:
The ultrafine cemented carbides were prepared with ultrafine WC powders synthesized with two different methods. Meanwhile, the causes of non-correspondence of Fisher particle size of ultrafine WC powder to WC grain size of ultrafine cemented carbide were analyzed from the two respects of the aggregates and sintering necks of WC powders. The results show that existence of aggregates and sintering necks can result in the deviation between Fisher particle size and primary particle size of WC powder. In ad- dition,the WC grains grow on the primary particles and therefore the deviation develops between actual WC grain size of cemented carbide and that predicted by Fisher particle size of WC powder.
quote
| GB/T 7714-2015 | [1] ZHANG Wei-bing. Analysis of the Causes for Non-correspondence of Fisher Particle Size of Ultrafine WC Powder to WC Grain Size of Ultrafine Cemented Carbide[J]. Rare Metals and Cemented Carbides, 2013(6): 51-54. |
| MLA | [1] ZHANG Wei-bing. "Analysis of the Causes for Non-correspondence of Fisher Particle Size of Ultrafine WC Powder to WC Grain Size of Ultrafine Cemented Carbide." Rare Metals and Cemented Carbides, no. 6, 2013, pp. 51-54. |
| APA | [1] ZHANG Wei-bing. (2013). Analysis of the Causes for Non-correspondence of Fisher Particle Size of Ultrafine WC Powder to WC Grain Size of Ultrafine Cemented Carbide. Rare Metals and Cemented Carbides(6), 51-54. |
| IEEE | [1] ZHANG Wei-bing, "Analysis of the Causes for Non-correspondence of Fisher Particle Size of Ultrafine WC Powder to WC Grain Size of Ultrafine Cemented Carbide," Rare Metals and Cemented Carbides, no. 6, pp. 51-54, 2013. keywords: {ultrafine WC powder;ultrafine cemented carbide;Fisher particle size;grain size;aggregate;sintering neck} |