Research on Process Parameters of WEDM Cutting of YG6 Cemented Carbide AITranslate
Abstract AITranslate
Cutting experiment of YG6 cemented carbide was carried out on a high speed WEDM machine tool.The influences were studied of such electrical parameters as pulse width,pulse gap,peak current and gap voltage on cutting speed and surface roughness of the cemented carbide.The machined surface of the cemented carbide has many pits,which are more apparent with increased pulse width and gap voltage.
KeyWords AITranslate
1孙泽成,王彤,李龙文,赵曦,明龙,蒋文君.基于粒子群算法的在蒸汽水雾中电火花线切割大厚度工件模型优化[J].硬质合金,2018,35(6):432-440.
2吴海会,王彤,王俊棋,尹洪石.基于Cr12MoV模具钢水雾中电火花线切割工艺研究[J].硬质合金,2017,34(2):120-128.
3黄小波.UG三维建模技术减小压坯毛刺的模具设计[J].硬质合金,2017,34(3):174-178. 被引量：1
4吴海会,王彤,王俊棋,尹洪石.超声水雾中电火花线切割精加工特性研究[J].硬质合金,2017,34(3):179-185. 被引量：1
5王彤,蒋婷,吕先崇,许小村.单脉冲气中电火花线切割电蚀坑形貌仿真分析[J].机床与液压,2017,45(23):120-123. 被引量：4
6曾守富,王晓灵,易健宏.慢走丝线切割加工对Ti(C,N)基金属陶瓷抗弯强度的影响[J].稀有金属与硬质合金,2018,46(2):42-48. 被引量：1
7沈钰,白海清,高飞,王磐.高速钢中走丝电火花线切割加工参数试验研究[J].热加工工艺,2018,47(17):68-71. 被引量：12
8沈钰,白海清.麻花钻后刀面线切割专用夹具设计与试验研究[J].制造技术与机床,2019(3):83-87.
9颜娟,苏伟.硬质合金线切割加工产品外观质量改进的研究[J].稀有金属与硬质合金,2019,47(5):79-82. 被引量：2
10伍俏平,欧阳志勇,阳慧,宋琨.超细晶硬质合金加工机理及加工性能[J].宇航材料工艺,2019,49(6):1-6. 被引量：5
1王彤,张通,吴吉荣,吴林波,马永会,刘盼.基于PNN神经网络电火花线切割中厚度工件放电状态研究[J].硬质合金,2018,35(5):351-357. 被引量：1
2赵丽丽.机械加工对金属零件加工精度的影响[J].世界有色金属,2019,0(5):227-228. 被引量：2
3任艳霞.基于MDT工具集的UG模具复杂轮廓线的控制方法[J].机械设计与制造工程,2019,48(9):38-41.
4胡思远.中走丝电火花线切割工艺参数优化分析[J].煤矿机械,2020,41(2):107-110. 被引量：3
5左巍.电火花线切割加工质量控制的研究[J].科技风,2020,0(15):177-177. 被引量：1
6白海清,沈钰,舒林森,高飞.304不锈钢激光熔覆件的制备及小孔钻削实验研究[J].热加工工艺,2020,49(10):84-88. 被引量：3
7王新荣,任城龙,郑成德,李小海.混粉电火花放电蚀坑及温度场仿真研究[J].机床与液压,2020,48(11):155-158. 被引量：2
8王新荣,任城龙,王冬,张霞.混粉电火花加工介质击穿机理及工艺特性仿真研究[J].佳木斯大学学报：自然科学版,2020,38(5):74-77.
9符继麟,苏小平.制动器安装底板低压铸造浇注系统设计及工艺参数优化[J].热加工工艺,2020,49(17):68-71. 被引量：3
10郭荣,马虎亮,李文辉,王燕青.中走丝电火花线切割TA2钛薄壁件加工变形研究[J].热加工工艺,2020,49(19):127-132.
1林兴华.YG6硬质合金与2Cr13不锈钢的钎焊[J].焊接,1993(3):24-25. 被引量：3
2杨建国,张雄伟.WEDM角形精度与AGIEpilot[J].电加工,1994(5):17-24.
3冯晓丹,张玉.线切割加工对模具寿命及表面质量的影响[J].模具制造,2007,7(1):60-62. 被引量：2
4李剑峰.降低钣金件点焊凹坑工艺试验[J].二机信息,1993(1):27-29.
5何柏林,于影霞.45钢与YG6硬质合金的钎焊性能[J].洛阳工学院学报,1995,16(2):10-14. 被引量：5
6陈德忠.电火花线切割加工技术在模具制造中的应用[J].机械工人：冷加工,2003(6):22-24. 被引量：4
7宋彦文,邵雨露,付保英.镁合金冲压技术工艺参数研究[J].热加工工艺,2009,38(13):88-90. 被引量：3
8贾志新,宋悦铭,谢志文.电火花线切割加工中放电间隙伏安特性的研究[J].电加工与模具,2003(6):16-18. 被引量：5
9刘书麟.影响汽车用IF钢力学性能的工艺参数研究[J].热加工工艺,2014,43(24):192-194. 被引量：5
10张高萍,郭光宜,赵灵.硬质合金电火花加工性能的试验研究[J].现代制造工程,2011(8):83-86. 被引量：8
Basic Information:
DOI：
Chinese Library Classification Number:TG484[金属学及工艺—焊接]
Citation Information:
Cutting experiment of YG6 cemented carbide was carried out on a high speed WEDM machine tool.The influences were studied of such electrical parameters as pulse width,pulse gap,peak current and gap voltage on cutting speed and surface roughness of the cemented carbide.The machined surface of the cemented carbide has many pits,which are more apparent with increased pulse width and gap voltage.
quote
| GB/T 7714-2015 | [1] GUO Chong-wen, LI Wen-bin. Research on Process Parameters of WEDM Cutting of YG6 Cemented Carbide[J]. Rare Metals and Cemented Carbides, 2015(3): 67-70. |
| MLA | [1] GUO Chong-wen, and LI Wen-bin. "Research on Process Parameters of WEDM Cutting of YG6 Cemented Carbide." Rare Metals and Cemented Carbides, no. 3, 2015, pp. 67-70. |
| APA | [1] GUO Chong-wen, & LI Wen-bin. (2015). Research on Process Parameters of WEDM Cutting of YG6 Cemented Carbide. Rare Metals and Cemented Carbides(3), 67-70. |
| IEEE | [1] GUO Chong-wen and LI Wen-bin, "Research on Process Parameters of WEDM Cutting of YG6 Cemented Carbide," Rare Metals and Cemented Carbides, no. 3, pp. 67-70, 2015. keywords: {wire electric discharge machining(WEDM);electrical parameter;cemented carbide;machining speed;surface roughness} |