daohang fenxiangbox searchbox qikanlogonew daohangnew searchboxnew navrightzone footerzone paper

Crystal structure and formation mechanism of the secondary phase in Heusler Ni-Mn-Sn-Co materials AITranslate

Shanghai University; Shanghai University; Shanghai University; Shanghai University; Fayetteville State University; Shanghai University
AITranslate
Publisher: Springer Nature
Share Citation Information Add to Favorites

    Scan to share on WeChat or Moments

Use WeChat scan.
Share with WeChat friends or Moments

Abstract AITranslate

In the present work, crystal structure and formation mechanism of the secondary phase in Heusler Ni-Mn-Sn-Co materials were investigated using X-ray diffraction, scanning/transmission electron microscopy and selected-area electron diffraction techniques. Experimental results showed that the secondary phase presented in both Ni44.1Mn35.1Sn10.8Co10 as-cast bulk alloy and melt-spun ribbon, possessing a face-centered cubic (fcc) Ni17Sn3-type structure. The secondary phase in the as-cast bulk alloy was resulted from a eutectic reaction after the formation of a primary dendritic β phase during cooling. However in the melt-spun rapidly solidified ribbon, the secondary phase was largely suppressed as nano-precipitates distributed along the grain boundaries, which was attributed to a divorced eutectic reaction. The secondary phase exhibited partial amorphous state due to high local cooling rate.

KeyWords AITranslate

Heusler NiMnSnCo materials Secondary phase Melt spinning Divorced eutectic reaction Microstructure
No data

Basic Information:

DOI:https://doi.org/10.1007/s40436-014-0093-y

Chinese Library Classification Number:

Citation Information:

In the present work, crystal structure and formation mechanism of the secondary phase in Heusler Ni-Mn-Sn-Co materials were investigated using X-ray diffraction, scanning/transmission electron microscopy and selected-area electron diffraction techniques. Experimental results showed that the secondary phase presented in both Ni44.1Mn35.1Sn10.8Co10 as-cast bulk alloy and melt-spun ribbon, possessing a face-centered cubic (fcc) Ni17Sn3-type structure. The secondary phase in the as-cast bulk alloy was resulted from a eutectic reaction after the formation of a primary dendritic β phase during cooling. However in the melt-spun rapidly solidified ribbon, the secondary phase was largely suppressed as nano-precipitates distributed along the grain boundaries, which was attributed to a divorced eutectic reaction. The secondary phase exhibited partial amorphous state due to high local cooling rate.

quote

GB/T 7714-2015 [1] JinKe Yu, HongWei Li, QiJie Zhai, et al. Advances in Manufacturing, 2014(2). DOI:10.1007/s40436-014-0093-y.
MLA [1] JinKe Yu, et al., Advances in Manufacturing, no. 2, 2014, https://doi.org/10.1007/s40436-014-0093-y.
APA [1] JinKe Yu, HongWei Li, QiJie Zhai, JianXun Fu, ZhiPing Luo, & HongXing Zheng. (2014). Advances in Manufacturing(2). https://doi.org/10.1007/s40436-014-0093-y
IEEE [1] JinKe Yu, HongWei Li, QiJie Zhai, JianXun Fu, ZhiPing Luo, and HongXing Zheng, Advances in Manufacturing, no. 2, 2014, doi: 10.1007/s40436-014-0093-y. keywords: {Heusler NiMnSnCo materials;Secondary phase;Melt spinning;Divorced eutectic reaction;Microstructure}