Influence of TiC Content on Microstructure and Properties of TiC/Cu Composite AITranslate
Abstract AITranslate
TiC/Cu composite was prepared by powder metallurgy,the influence of different TiC content on microstructure and tensile properties of the composite was investigated,and its surface morphology and tensile fracture morphology were analyzed by scanning electron microscope and metallographic microscope.The results show that TiC particles is tightly bonded to the substrate and distributed evenly in the substrate.The tensile strength of the composite increases at first and then decreases with TiC content increasing.TiC addition remarkably hinders the growth of matrix grains.When TiC content is 2%,its reinforcement effect is obvious and the plasticity of the composite is high.
KeyWords AITranslate
1王松,付作鑫,王塞北,沈月,谢明,张吉明.银基电接触材料的研究现状及发展趋势[J].贵金属,2013,34(1):79-83. 被引量：54
2柏小平,林万焕,张明江.低压电器用电触头材料[J].电工材料,2007(3):12-16. 被引量：26
3湛永钟.非连续增强铜基复合材料的研究现状[J].材料开发与应用,2005,20(4):41-46. 被引量：6
4徐少春,杨军,崔雅茹.陶瓷颗粒增强铜基复合材料研究进展[J].热加工工艺,2009,38(10):105-108. 被引量：15
5宋月波,李永靖,龙律位,杨建林.TiC颗粒增强铜镍基复合材料及磨损性[J].辽宁工程技术大学学报：自然科学版,2014,33(6):805-809. 被引量：3
1许海,李钊,王俊峰,陈金水,肖翔鹏.SPS烧结原位制备Al2O3-TiC增强Cu基复合材料的组织与性能[J].材料热处理学报,2018,39(5):10-16. 被引量：1
1吴婉,张柯柯,吴咏锦,王冰莹,刘鹏,肖娜.镀铜氧化锆增强低银Sn1.0Ag0.5Cu复合钎料的性能及其钎焊接头性能[J].材料热处理学报,2022,43(12):169-177. 被引量：1
1王铁军,秦思贵,熊宁,林同伟.TiC/Cu熔渗复合材料耐烧蚀与耐热震性能研究[J].宇航材料工艺,2007,37(2):62-65. 被引量：2
2王铁军,熊宁,秦思贵,刘国辉.TiC/Cu金属陶瓷复合材料的研究[J].兵器材料科学与工程,2006,29(5):37-41. 被引量：10
3闫洁,江开勇.TiC/Cu复合材料的PM法制备与性能[J].重庆理工大学学报：自然科学,2012,26(9):42-45. 被引量：7
4黄向东,刘桂香,叶学青,李强.热压烧结法制备C_f/TiC/Cu复合材料的组织及性能[J].中国有色金属学报,2010,20(8):1605-1611. 被引量：6
5倪小岚,黄向东.原位合成TiC/CuTi复合材料的显微分析[J].硅酸盐通报,2015,34(11):3175-3179. 被引量：1
6刘勇,李辉,杨志强,田保红,张毅.TiC含量对TiC/Cu-Al_2O_3复合材料热变形行为的影响[J].材料热处理学报,2015,36(7):1-6. 被引量：1
7杨志强,刘勇,田保红,张毅.TiC/Cu-Al_2O_3复合材料的强化机理及动态再结晶行为[J].中国有色金属学报,2014,24(6):1524-1530. 被引量：3
8杨志强,刘勇,田保红,张毅.真空热压烧结制备10vol%TiC/Cu-Al_2O_3复合材料及热变形行为研究[J].功能材料,2014,45(2):147-152. 被引量：5
9杨志强,刘勇,田保红,张毅.TiC/Cu-Al_2O_3复合材料动态再结晶临界条件[J].复合材料学报,2014,31(4):963-969. 被引量：6
10杨志强,刘勇,田保红,张毅.10 vol%TiC/Cu-Al_2O_3复合材料热变形及动态再结晶行为[J].材料热处理学报,2013,34(12):35-40. 被引量：1
Basic Information:
DOI：
Chinese Library Classification Number:TB331[一般工业技术—材料科学与工程]
Citation Information:
TiC/Cu composite was prepared by powder metallurgy,the influence of different TiC content on microstructure and tensile properties of the composite was investigated,and its surface morphology and tensile fracture morphology were analyzed by scanning electron microscope and metallographic microscope.The results show that TiC particles is tightly bonded to the substrate and distributed evenly in the substrate.The tensile strength of the composite increases at first and then decreases with TiC content increasing.TiC addition remarkably hinders the growth of matrix grains.When TiC content is 2%,its reinforcement effect is obvious and the plasticity of the composite is high.
quote
| GB/T 7714-2015 | [1] LI Xiao-chi, YANG Qiao. Influence of TiC Content on Microstructure and Properties of TiC/Cu Composite[J]. Rare Metals and Cemented Carbides, 2017(1): 46-51. |
| MLA | [1] LI Xiao-chi, and YANG Qiao. "Influence of TiC Content on Microstructure and Properties of TiC/Cu Composite." Rare Metals and Cemented Carbides, no. 1, 2017, pp. 46-51. |
| APA | [1] LI Xiao-chi, & YANG Qiao. (2017). Influence of TiC Content on Microstructure and Properties of TiC/Cu Composite. Rare Metals and Cemented Carbides(1), 46-51. |
| IEEE | [1] LI Xiao-chi and YANG Qiao, "Influence of TiC Content on Microstructure and Properties of TiC/Cu Composite," Rare Metals and Cemented Carbides, no. 1, pp. 46-51, 2017. keywords: {TiC/Cu composite;TiC reinforcement phase;TiC content;powder metallurgy;microstructure;fracture behavior} |