Research on Density and Deformation Mechanism of Porous Metal and Alloy during Processing AITranslate
Abstract AITranslate
This paper describes the compaction of the powder in rigid mould and the development of densifying and deformation mechanism during this process.The emphases are also put on the difference of plastic deformation mechanism between porous alloy and densified alloy,deformation of the former affected greatly by the oxide film and porosity.In addition,the author also presents the advanced methods of plastic deformation of the porous materials,especially a popular yield model.
KeyWords AITranslate
1陈振华.粉末压缩的流变学问题(二)——粉末压缩的流变学模型[J].稀有金属材料与工程,1992,21(2):1-11. 被引量：1
2陈振华.粉末压缩的流变学问题(一)——粉末体的流变特性[J].稀有金属材料与工程,1992,21(1):1-7. 被引量：2
3黄培云.粉末冶金原理[M].北京:冶金工业出版社,1992.182-189.
4Lavernia E J,et al.Spray deposition of metals:A review[J].Mater Sci and Eng,1988,98:381.
5Hariprasad S,et al.Microstructures and mechanical properties of dispersion-strengthened high-temperature Al-8.5Fe-1.2V-1.7Si alloy produced by atomized melt deposition process[J].metal Trans,1993,124A:866.
6柯尔巴什尼可夫 A N(苏).颗粒材料[M].北京:国防工业出版社,1986.
7Henry R,et al.Physical modelling of powder consolidation processes[J].Pro in Mater Sci,1997,43:263.
8Mori K,et al.Analysis of the forming process of sinterd powder metals by a rigid-plastic finite-Element Method[J].Int Mech Sci,1987,29(4):229.
9Doraivelu S M,et al.A new yield function for compressible P/M materials[J].Int J Mech Sci,1984,26(9/10):527.
10卫平原 等.粉末压缩的流变学模型[J].中国有色金属学报,1994,4(4):56-56.
1张福全,陈振华,严红革,袁武华,唐绍裘,傅杰兴.喷射共沉积7075/SiC_p复合材料薄板的轧制成形[J].中国有色金属学报,2005,15(7):1131-1138. 被引量：8
2庞厚君,徐金富,叶以富.多孔铝的低压成形工艺及其影响因素[J].机械工程材料,2005,29(11):59-63.
3陈飞凤,严红革,陈振华,张昊,夏伟军.外框限制轧制工艺在喷射沉积板坯加工中的应用[J].机械工程材料,2007,31(2):19-22. 被引量：10
4陈志钢,陈振华,陈鼎.喷射沉积及其制品的后续致密化研究[J].材料导报,2008,22(5):92-95. 被引量：7
5王凯,陈振华,张昊,陈刚.梯温楔压对喷射沉积SiC_p/7090致密化的影响[J].中国有色金属学报,2008,18(6):997-1004. 被引量：2
6毛成,高文理,苏海,卢健,陆政.搅拌铸造SiC_p/A356复合材料的显微组织及力学性能[J].特种铸造及有色合金,2010(3):256-259. 被引量：10
7张磊,杨滨.热等静压对电子封装60wt%Si-Al合金组织与性能的影响[J].塑性工程学报,2010,17(4):116-119. 被引量：5
8华建社,袁超,杜金星.高温复合相变蓄热材料压制工艺及性能研究[J].粉末冶金技术,2018,36(4):308-314. 被引量：4
1王晓峰,赵九洲,何杰,胡壮麒.Hot rolling characteristics of spray-formed AZ91 magnesium alloy[J].中国有色金属学会会刊：英文版,2007,17(2):238-243. 被引量：4
2陈飞凤,严红革,陈振华,张昊,夏伟军.改善喷射沉积多孔材料开裂行为工艺的研究[J].材料导报,2007,21(8):103-105.
3陈志钢,陈振华,陈鼎.喷射沉积及其制品的后续致密化研究[J].材料导报,2008,22(5):92-95. 被引量：7
4韩翠珍,张胤,王刚.喷射沉积坯GCr15合金致密化研究[J].过程工程学报,2010,10(S1):13-18. 被引量：1
5李荣德,刘敬福.喷射成形技术国内外发展与应用概况[J].铸造,2009,58(8):797-803. 被引量：15
6刘丘林,刘允中,肖文华,李元元.喷射成形多孔材料的致密化工艺综述[J].材料导报,2009,23(23):73-76. 被引量：4
7冯朝辉,苏海,高文理,卢健,陆政.喷射共沉积SiC_p/2024铝基复合材料轧板的显微组织及力学性能[J].机械工程材料,2009,33(12):86-89. 被引量：2
8苏海,高文理,毛成,张辉,刘洪波,卢健,陆政.搅拌铸造SiC_p/2024铝基复合材料的显微组织与力学性能[J].中国有色金属学报,2010,20(2):217-225. 被引量：34
9刘敬福,李荣德,孙鑫志,白彦华,谢懿.挤压温度对喷射成形Zn-Al-Mn-Cu-Mg合金组织与力学性能的影响[J].铸造,2010,59(9):943-946. 被引量：6
10刘丘林,刘允中.喷射成形技术在铝合金制备中的应用[J].材料导报：纳米与新材料专辑,2010,24(2):213-216. 被引量：2
1华林,赵仲治.粉末烧结材料屈服条件[J].武汉汽车工业大学学报,1999,21(2):26-30. 被引量：2
2胡荣泽.评多孔体的表征[J].粉体技术,1995,1(4):26-33. 被引量：4
3丘可昂.极小气孔多孔体渗透性的测量[J].稀有金属材料与工程,1989(3):43-46. 被引量：1
4丘可昂.多孔体的渗透性的特征和平均孔径的测量[J].稀有金属材料与工程,1990(2):51-55. 被引量：5
5秦训鹏,华林.粉末冶金烧结材料广义塑性屈服条件[J].汽车工艺与材料,2005(1):7-9.
6张池明,陈诵英.多孔超细粒子的制备[J].粉体技术,1995,1(5):18-25. 被引量：2
7李永志,白小波.钼粉末多孔体烧结材料的制备及镦粗致密实验研究[J].热加工工艺,2009,38(23):36-38. 被引量：5
8华林,秦训鹏.粉末冶金材料两个屈服条件几何性质[J].武汉理工大学学报,2005,27(5):1-4.
9林启权,颜明,杨辅,彭传东.金属粉末材料压制过程的修正屈服模型[J].材料导报,2015,29(22):145-149. 被引量：2
10李妍,王磊,张艳,李腾飞,杜军.多孔Ti-Mo合金的微观结构及吸气性能研究[J].稀有金属,2010,34(4):475-479. 被引量：6
Basic Information:
DOI：
Chinese Library Classification Number:TF125.6[冶金工程—粉末冶金];TF12[冶金工程—粉末冶金]
Citation Information:
This paper describes the compaction of the powder in rigid mould and the development of densifying and deformation mechanism during this process.The emphases are also put on the difference of plastic deformation mechanism between porous alloy and densified alloy,deformation of the former affected greatly by the oxide film and porosity.In addition,the author also presents the advanced methods of plastic deformation of the porous materials,especially a popular yield model.
quote
| GB/T 7714-2015 | [1] ZHAN Mei-yan, KUANG Yong, ZHOU Ming, et al. Research on Density and Deformation Mechanism of Porous Metal and Alloy during Processing[J]. Rare Metals and Cemented Carbides, 2002(4): 42-47. |
| MLA | [1] ZHAN Mei-yan, et al., "Research on Density and Deformation Mechanism of Porous Metal and Alloy during Processing." Rare Metals and Cemented Carbides, no. 4, 2002, pp. 42-47. |
| APA | [1] ZHAN Mei-yan, KUANG Yong, ZHOU Ming, & XIA Wei-jun. (2002). Research on Density and Deformation Mechanism of Porous Metal and Alloy during Processing. Rare Metals and Cemented Carbides(4), 42-47. |
| IEEE | [1] ZHAN Mei-yan, KUANG Yong, ZHOU Ming, and XIA Wei-jun, "Research on Density and Deformation Mechanism of Porous Metal and Alloy during Processing," Rare Metals and Cemented Carbides, no. 4, pp. 42-47, 2002. keywords: {medium;forming;densify;plastic deformation;production condition} |