Mathematical Model for the Cold Rolling Force of Titanium Plate AITranslate
Abstract AITranslate
The mathematical model for the cold rolling force of titanium plate is studied to control the technological parameters. Based on Maple software, titanium plate cold rolling experiments and multivariate nonlinear regression,average titanium plate rolling pressure model is obtained and then rolling force model is established. Compared with the measured value of titanium plate rolling force, the average relative error of the calculated value from the model is 8.0 %.
KeyWords AITranslate
1方轶.S45500冷轧薄板脆性问题探讨[J].特钢技术,2001,9(1):66-68.
2王丁,史庆南,起华荣,曹占元,蒋泰旭.N6纯镍板材冷轧后退火工艺的探索[J].热加工工艺,2016,45(22):220-222. 被引量：1
3陈继平,马玉平,陈汉,俞波,钱健清.高耐蚀型耐候钢S450EW变形抗力模型的研究[J].热加工工艺,2016,45(12):86-88. 被引量：1
4张麦仓,罗子健,曾凡昌.应用多元非线性回归方法建立FGH95合金的本构关系[J].材料工程,1999(1):20-22. 被引量：9
5戴毅,王军刚,刘宇明,吴晓东,王娟,张清,叶红川,杨建朝.大规格TC4板材冷轧工艺研究[J].金属材料与冶金工程,2011,39(6):31-33. 被引量：1
6王红武.β21S钛合金板材冷轧加工工艺的研究[J].钛工业进展,2001,18(2):39-41. 被引量：8
7沈丙振,方能炜,沈厚发,柳百成.低碳钢奥氏体再结晶模型的建立[J].材料科学与工艺,2005,13(5):516-520. 被引量：16
8王健,王宇,谢红飙,王松,杨海涛.基于热连轧实测数据的金属材料变形抗力模型[J].塑性工程学报,2015,22(1):55-60. 被引量：13
9杨跃辉,蔡庆伍,武会宾,王华.9Ni钢的高温变形行为及其数学模型研究[J].热加工工艺,2009,38(12):1-3. 被引量：4
10李才巨,顾家琳,刘庆.Ti-15-3钛合金超塑行为研究[J].材料科学与工艺,2007,15(3):319-324. 被引量：8
Basic Information:
DOI：
Chinese Library Classification Number:TG302[金属学及工艺—金属压力加工]
Citation Information:
The mathematical model for the cold rolling force of titanium plate is studied to control the technological parameters. Based on Maple software, titanium plate cold rolling experiments and multivariate nonlinear regression,average titanium plate rolling pressure model is obtained and then rolling force model is established. Compared with the measured value of titanium plate rolling force, the average relative error of the calculated value from the model is 8.0 %.
quote
| GB/T 7714-2015 | [1] CHENG Ting-yu, ZHENG Feng. Mathematical Model for the Cold Rolling Force of Titanium Plate[J]. Rare Metals and Cemented Carbides, 2009(4): 26-28. |
| MLA | [1] CHENG Ting-yu, and ZHENG Feng. "Mathematical Model for the Cold Rolling Force of Titanium Plate." Rare Metals and Cemented Carbides, no. 4, 2009, pp. 26-28. |
| APA | [1] CHENG Ting-yu, & ZHENG Feng. (2009). Mathematical Model for the Cold Rolling Force of Titanium Plate. Rare Metals and Cemented Carbides(4), 26-28. |
| IEEE | [1] CHENG Ting-yu and ZHENG Feng, "Mathematical Model for the Cold Rolling Force of Titanium Plate," Rare Metals and Cemented Carbides, no. 4, pp. 26-28, 2009. keywords: {titanium plate;cold rolling;rolling force;mathematical model;Maple software;multivariate non-linear regression} |