Study on Fused 3D Printing Forming Technology of Tungsten-based Composites AITranslate
Abstract AITranslate
Tungsten-based composite materials were synthesized by using tungsten powder,nickel powder, iron powder and casting wax,and then tungsten-based composite material parts with a certain shape and size were prepared by fused 3D printing forming technique.The appropriate printing parameters were determined and the precision of the printed parts was evaluated.The results show that the viscosity of tungsten- nickel-iron-paraffin composite material with 85% solid content is stable with temperature changing, which can maintain the stability and fluidity of the material inside the printing cavity,and obtain a higher solid content of the part at the same time.The composites with the solid contents of 80%,85% and 88% have a uniform density distribution inside the cavity,and their melt has certain stability and uniformity inside the printing cavity.The appropriate printing parameters are as follows:printing temperature of 130~ 132℃,supply pressure of 124.11~151.69kPa,printing ring distance of 1.1mm,and layer height of 1.24 mm.The precision of the parts printed with the above method is low,which is mainly affected by the discharge mode and program control.
KeyWords AITranslate
1王雪莹.3D打印技术与产业的发展及前景分析[J].中国高新技术企业,2012(26):3-5. 被引量：355
2杨永强,刘洋,宋长辉.金属零件3D打印技术现状及研究进展[J].机电工程技术,2013,42(4):1-7. 被引量：128
3袁建鹏.3D打印用特种粉体材料产业发展现状与趋势[J].新材料产业,2013(12):19-23. 被引量：31
4邹海平,李上奎,李博,王兵.3D打印用金属粉末的制备技术发展现状[J].中国金属通报,2016(8):88-89. 被引量：14
5蒋小珊,齐乐华.3D打印成形微小型金属件的研究现状及其发展[J].中国印刷与包装研究,2014,6(5):15-25. 被引量：10
1丁红瑜,尹衍军,关杰仁,陈超,蒋志勇,王自力.难熔金属增材制造研究进展[J].稀有金属材料与工程,2021,50(6):2237-2243. 被引量：8
1徐照宁,田高龙,朱晨辉,徐流杰.钼合金增材制造研究进展[J].中国钼业,2021,45(6):1-6. 被引量：2
2陈慧,董静,资旭辉,张桃梅,韩勇,陈超.SLM和SEBM成形纯钨组织与缺陷的对比研究[J].稀有金属材料与工程,2022,51(9):3282-3288.
3薛凌峰,周博康,李俊峰,魏正英.95W-5Ta激光粉末床熔融应力场演变及变形控制[J].焊接学报,2022,43(10):93-100.
4宋涛,李静,王志武,张一可.传统工艺和激光选区熔化技术制备的Inconel 718合金在650℃下表面氧化膜的形成机理[J].腐蚀与防护,2022,43(9):11-16.
5王凯,张鹏,杨卫鹏,张维明,李广阔.液体火箭发动机辐射冷却身部材料研究进展[J].火箭推进,2023,49(1):12-20.
6崔烺,王守勇,尹飞,冯胜强,刘光,贾利.喷涂及激光熔覆制备难熔金属涂层的研究现状[J].材料保护,2023,56(5):153-163.
7汪志勇,吴杰峰,刘志宏,马建国,翟华.聚变堆包层第一壁缩比部件激光选区熔化成形研究[J].精密成形工程,2023,15(6):111-119.
8郭义乾,郭正华,李智勇,汪广平,刘奋成,曾一达.高熵合金高能束增材制造及性能的研究进展[J].稀有金属材料与工程,2023,52(8):2965-2977.
1王震,巩维艳,祁俊峰,赵长喜.航天器通风结构激光选区熔化成形技术研究[J].航天制造技术,2018(5):1-3. 被引量：2
2林涛.做一个有教养的家长[J].青少年与法,2018,0(6):41-41.
3曹武举,马志勇,刘安邦,张家彬.海藻酸钠/明胶溶液3D低温沉积成形线材的尺寸精度[J].机械工程材料,2018,42(12):42-46. 被引量：1
4艾怡芹.镍粉中氧含量的测定[J].热处理,2018,33(6):55-57.
5王微,阚玉锦,王宏琴,王刚.FDM 3D打印参数对打印件精度的影响研究[J].佳木斯大学学报：自然科学版,2019,37(1):123-125. 被引量：9
6陈一天.监察调查权与刑事侦查权界限考[J].法治论坛,2018(3):126-138. 被引量：3
7刘波.机械球磨制备超细镍粉[J].冶金与材料,2018,38(6):175-176. 被引量：1
8刘元军,孙嘉瑞,李燕媚,李玉,赵晓明.烘干时间对镍粉涂层复合材料电磁性能和力学性能的影响[J].纺织科学与工程学报,2019,36(1):86-91. 被引量：1
9郑兴伟,卢佳,庄欣,袁杰.航空用玻璃纤维铝合金层板成形技术研究进展[J].材料导报,2018,32(A02):413-418. 被引量：5
10韩星,梁香宁.镍铁冶炼埋弧电炉设计[J].冶金设备,2018(6):27-31. 被引量：1
Basic Information:
DOI：
Chinese Library Classification Number:TB333[一般工业技术—材料科学与工程]
Citation Information:
Tungsten-based composite materials were synthesized by using tungsten powder,nickel powder, iron powder and casting wax,and then tungsten-based composite material parts with a certain shape and size were prepared by fused 3D printing forming technique.The appropriate printing parameters were determined and the precision of the printed parts was evaluated.The results show that the viscosity of tungsten- nickel-iron-paraffin composite material with 85% solid content is stable with temperature changing, which can maintain the stability and fluidity of the material inside the printing cavity,and obtain a higher solid content of the part at the same time.The composites with the solid contents of 80%,85% and 88% have a uniform density distribution inside the cavity,and their melt has certain stability and uniformity inside the printing cavity.The appropriate printing parameters are as follows:printing temperature of 130~ 132℃,supply pressure of 124.11~151.69kPa,printing ring distance of 1.1mm,and layer height of 1.24 mm.The precision of the parts printed with the above method is low,which is mainly affected by the discharge mode and program control.
quote
| GB/T 7714-2015 | [1] XIE Hai-lin, WU Ke, FENG Jian, et al. Study on Fused 3D Printing Forming Technology of Tungsten-based Composites[J]. Rare Metals and Cemented Carbides, 2018(6): 32-36. |
| MLA | [1] XIE Hai-lin, et al., "Study on Fused 3D Printing Forming Technology of Tungsten-based Composites." Rare Metals and Cemented Carbides, no. 6, 2018, pp. 32-36. |
| APA | [1] XIE Hai-lin, WU Ke, FENG Jian, LI Bang-yi, ZHANG Jing, & ZHU Yu-bin. (2018). Study on Fused 3D Printing Forming Technology of Tungsten-based Composites. Rare Metals and Cemented Carbides(6), 32-36. |
| IEEE | [1] XIE Hai-lin, WU Ke, FENG Jian, LI Bang-yi, ZHANG Jing, and ZHU Yu-bin, "Study on Fused 3D Printing Forming Technology of Tungsten-based Composites," Rare Metals and Cemented Carbides, no. 6, pp. 32-36, 2018. keywords: {tungsten-based composite material;3D printing;fused deposition;printing parameter;solid content;part precision} |