Fabrication and Thermoelectric Properties of Freestanding Ba1/3CoO2 Single-Crystalline Films Fabrication and Thermoelectric Properties of Freestanding Ba1/3CoO2 Single-Crystalline Films AITranslate

Basic Information:

DOI：https://doi.org/10.1021/acsaelm.3c01129

Chinese Library Classification Number:

Citation Information:

Thermoelectric energy conversion has attracted attention as an energy-harvesting technology for converting waste heat into electricity via the Seebeck effect. Conducting oxide-based thermoelectric materials that exhibit a high figure of merit are promising because of their good chemical and thermal stability as well as their harmless nature compared to chalcogenide-based state-of-the-art thermoelectric materials. Among many conducting oxides, Ba1/3CoO2 epitaxial films exhibit the highest figures of merit. For the practical use of Ba1/3CoO2, bulk ceramics or single-crystalline Ba1/3CoO2 is necessary. Here, we show that freestanding Ba1/3CoO2 single-crystalline films can be fabricated by peeling Ba1/3CoO2 epitaxial films from the substrate. We fabricated Ba1/3CoO2 epitaxial films and immersed them in 40 °C hot water for several tens of minutes. Subsequently, the Ba1/3CoO2 epitaxial film spontaneously peeled off and floated on the surface of the water like seaweed. We measured and analyzed the crystal structure, chemical composition, and thermoelectric properties before and after peeling and realized that there was no significant difference. The present results provide a useful method for fabricating freestanding single-crystalline oxide films for thermoelectrics.