Study on Preparation and Performance of WC-15Ni Non-magnetic Cemented Carbide with High Properties AITranslate
Abstract AITranslate
Superfine WC and electrolytic nickel powder were used as the principal raw materials,the total carbon content in the mixture was adjusted,and then WC-15Ni non-magnetic cemented carbide with high properties was prepared by vacuum sintering and hot isostatic pressing（HIP）treatment.The effects were investigated of different carbon content and HIP treatment on the microstructure and properties of the sample.The results show that either too low or too high total carbon content in the mixture can deteriorate the properties of non-magnetic cemented carbide.When the carbon content in the mixture is 6.13%（mass fraction）,the material gets good performance with transverse rupture strength up to 3 300 MPa.In addition,HIP treatment can effectively eliminate the residual pores in the non-magnetic cemented carbide,stabilizing and improving its mechanical properties.
KeyWords AITranslate
1姜媛媛,易丹青,李荐,张路怀,苏华,黄亮,彭振文.WC-9Ni-0．57Cr硬质合金在模拟海水中的腐蚀特性[J].材料科学与工程学报,2008,26(5):750-753. 被引量：22
2温庆丰,刘莹,黄伟峰,索双富,刘向锋,王玉明.机械密封端面材料WC-Ni硬质合金的研究进展[J].粉末冶金材料科学与工程,2011,16(1):1-6. 被引量：28
3林春芳,杜玉国,孙丹,陈蓓瑾,刘莹华.WC-(7-9)Ni-(1-2)Cr硬质合金耐蚀性能的研究[J].硬质合金,2010,27(4):224-229. 被引量：12
4G．Mori,吴建国,陈满元.Cr3C2、TiC和TaC添加剂对硬质合金耐腐蚀性的影响[J].国外难熔金属与硬质材料,2003,19(2):10-15. 被引量：11
5蔡霞玲.YN14无磁合金生产中易产生的缺陷及其解决方法[J].江西冶金,1997,17(6):25-26. 被引量：1
6段海涛,陈同舟,裴召辉,等.耐磨耐蚀硬质合金研究与发展[C]//第九届全国摩擦、减摩、耐磨材料和技术学术研讨会论文集.洛阳:中国机械工程学会摩擦学分会峰擦、减摩、耐磨材料和技术专业委员会.2009:2027.
7张杰,李鲲,吴兆山,丁思云,李香,郑国运.镶装式硬质合金密封环的压力变形研究[J].液压气动与密封,2012,32(2):29-33. 被引量：8
8陈川兰,罗晓军.建立硬质合金中脱碳相的综合分析方法[J].电子显微学报,2013,32(4):313-317. 被引量：3
9羊建高,谭敦强,陈颢.硬质合金[M].长沙:中南大学出版社,2012.
10孙景,刘俊朋,郭小南,梁福起,赵光远,范明德.含VC的WC-10%Ni硬质合金无磁机理研究[J].硬质合金,2003,20(2):72-75. 被引量：3
1徐翔宇,郑勇,吴昊,丁青军,王丽珠,欧阳杰.无磁金属陶瓷的研究进展[J].材料导报,2020,34(9):64-68. 被引量：2
2肖冬明,罗世铭,陈旭军,江林,陈正乾,毛海娜,张媛庆.羰基镍粉的制备及其在硬质合金行业的应用[J].硬质合金,2020,37(6):466-471.
3邹芹,张萌蕾,李艳国.添加剂改性WC硬质合金的性能与应用研究[J].制造技术与机床,2021(7):9-15. 被引量：2
4陈振磊,喻琛,邵鸣宇.不同粘结相硬质合金的研究进展[J].机械研究与应用,2021,34(5):204-209. 被引量：2
1赵明娟,薛林威,赵火平,赵龙志,余梦,李劲.FeCoCrNiAl/Al_(2)O_(3)金属陶瓷坯体凝胶注模研究[J].华东交通大学学报,2021,38(3):82-88. 被引量：1
2曹瑞军,李开深,李腾飞,何盛亚.金刚石含量对金刚石强化硬质合金耐磨性影响[J].硬质合金,2022,39(3):165-171. 被引量：1
3罗成,梁小东,唐冬梅,杨文强,王金林,曹志华.WC碳量对WC-6%Ni硬质合金组织与性能影响[J].硬质合金,2022,39(3):195-201. 被引量：2
4张云龙,牛楚涵,牛广津,张宇民,李启荣,高志杨,张唯一.La_(2)O_(3)掺杂量对WC-12Co硬质合金微观结构和硬度的影响[J].中国钨业,2022,37(2):53-59.
5胡启明,廖宇.贫碳WC-12%(Co+Ni)硬质合金微观组织与性能[J].硬质合金,2023,40(1):66-72.
6王春光,张立,黄祥,聂仁鑫,钟志强,龙佳威.合金添加剂对WC基硬质合金氧化行为及其关联特性的影响[J].粉末冶金材料科学与工程,2023,28(3):296-304. 被引量：1
1高海燕.无磁硬质合金的研究进展[J].稀有金属与硬质合金,2006,34(3):51-54. 被引量：2
2方名尧.无磁硬质合金模具的开发与生产[J].江西冶金,1993,13(2):43-45. 被引量：5
3周文运.无磁硬质合金制备工艺[J].磁性材料及器件,1996,27(1):41-45. 被引量：3
4罗在清.WC15Ni磁合金的质量控制[J].硬质合金,2005,22(2):93-95. 被引量：3
5王维军,马中伟,王伟.无磁钢制模具的热处理[J].机械工人：热加工,2003,27(8):52-54. 被引量：1
6史留勇,刘义敏,张守全,黄继华,赵兴科.初始成分对梯度硬质合金微观组织及脱β层厚度的影响[J].中国有色金属学报,2012,22(7):1984-1990. 被引量：6
7黄宗浩.无磁合金及YN14无磁硬质合金的研制[J].硬质合金,2002,19(1):26-28. 被引量：5
8孙景,刘俊朋,郭小南,梁福起,赵光远,范明德.含VC的WC-10%Ni硬质合金无磁机理研究[J].硬质合金,2003,20(2):72-75. 被引量：3
9刘永福,陈越.超细硬质合金的研究与应用[J].粉末冶金材料科学与工程,1997,2(1):76-80. 被引量：3
10YEN21新型无磁金属陶瓷材料[J].湖南冶金,2006,34(3):22-22.
Basic Information:
DOI：
Chinese Library Classification Number:TG135.5[一般工业技术—材料科学与工程]
Citation Information:
Superfine WC and electrolytic nickel powder were used as the principal raw materials,the total carbon content in the mixture was adjusted,and then WC-15Ni non-magnetic cemented carbide with high properties was prepared by vacuum sintering and hot isostatic pressing（HIP）treatment.The effects were investigated of different carbon content and HIP treatment on the microstructure and properties of the sample.The results show that either too low or too high total carbon content in the mixture can deteriorate the properties of non-magnetic cemented carbide.When the carbon content in the mixture is 6.13%（mass fraction）,the material gets good performance with transverse rupture strength up to 3 300 MPa.In addition,HIP treatment can effectively eliminate the residual pores in the non-magnetic cemented carbide,stabilizing and improving its mechanical properties.
quote
| GB/T 7714-2015 | [1] LIU Wen-bin, WANG Tie-jun, CHEN Fei-xiong, et al. Study on Preparation and Performance of WC-15Ni Non-magnetic Cemented Carbide with High Properties[J]. Rare Metals and Cemented Carbides, 2016(5): 74-78. |
| MLA | [1] LIU Wen-bin, et al., "Study on Preparation and Performance of WC-15Ni Non-magnetic Cemented Carbide with High Properties." Rare Metals and Cemented Carbides, no. 5, 2016, pp. 74-78. |
| APA | [1] LIU Wen-bin, WANG Tie-jun, CHEN Fei-xiong, CHEN Fu-ge, & XIE Yan-jun. (2016). Study on Preparation and Performance of WC-15Ni Non-magnetic Cemented Carbide with High Properties. Rare Metals and Cemented Carbides(5), 74-78. |
| IEEE | [1] LIU Wen-bin, WANG Tie-jun, CHEN Fei-xiong, CHEN Fu-ge, and XIE Yan-jun, "Study on Preparation and Performance of WC-15Ni Non-magnetic Cemented Carbide with High Properties," Rare Metals and Cemented Carbides, no. 5, pp. 74-78, 2016. keywords: {non-magnetic cemented carbide;WC-15Ni;ultrafine WC powder;electrolytic nickel powder;transverse rupture strength;total carbon content;HIP} |