Low-k and Recyclable High-Performance POSS/Polyamide Composites Based on Diels–Alder Reaction AITranslate
Abstract AITranslate
The rapid development in electronics requires high-performance and low-k materials. Introducing additional recyclability to these materials could further promote their application from environmental and economic aspects. In this paper, we report a reversibly cross-linked composite from a newly designed maleimide functionalized POSS (mPOSS) and aromatic polyamide with pendent furan groups (POF). The Diels–Alder reaction between maleimide and furan groups allowed the facile cross-linking of POF by mPOSS, thus significantly improving the thermal and mechanical properties of mPOSS/POF composites. The reversible feature of Diels–Alder reaction also conferred good recyclability to the mPOSS/POF composites. Tensile tests suggested that more than 80% of mechanical properties were retained in reprocessed composites even with multiple reprocessing cycles. Moreover, the porous nature of POSS molecules and the restricted motion of polymer chains by cross-linking significantly reduced the dielectric constant and dielectric loss of composites. These fascinating features of our mPOSS/POF composites make them promising candidate for high-performance, recyclable, and low-k dielectrics.
KeyWords AITranslate
Basic Information:
DOI:https://doi.org/10.1021/acsapm.8b00215
Chinese Library Classification Number:
Citation Information:
The rapid development in electronics requires high-performance and low-k materials. Introducing additional recyclability to these materials could further promote their application from environmental and economic aspects. In this paper, we report a reversibly cross-linked composite from a newly designed maleimide functionalized POSS (mPOSS) and aromatic polyamide with pendent furan groups (POF). The Diels–Alder reaction between maleimide and furan groups allowed the facile cross-linking of POF by mPOSS, thus significantly improving the thermal and mechanical properties of mPOSS/POF composites. The reversible feature of Diels–Alder reaction also conferred good recyclability to the mPOSS/POF composites. Tensile tests suggested that more than 80% of mechanical properties were retained in reprocessed composites even with multiple reprocessing cycles. Moreover, the porous nature of POSS molecules and the restricted motion of polymer chains by cross-linking significantly reduced the dielectric constant and dielectric loss of composites. These fascinating features of our mPOSS/POF composites make them promising candidate for high-performance, recyclable, and low-k dielectrics.
quote
| GB/T 7714-2015 | [1] Kaiju Luo, Guocheng Song, Yan Wang, et al. ACS Applied Polymer Materials, 2019(1). DOI:10.1021/acsapm.8b00215. |
| MLA | [1] Kaiju Luo, et al., ACS Applied Polymer Materials, no. 1, 2019, https://doi.org/10.1021/acsapm.8b00215. |
| APA | [1] Kaiju Luo, Guocheng Song, Yan Wang, Junrong Yu, Jing Zhu, & Zuming Hu. (2019). ACS Applied Polymer Materials(1). https://doi.org/10.1021/acsapm.8b00215 |
| IEEE | [1] Kaiju Luo, Guocheng Song, Yan Wang, Junrong Yu, Jing Zhu, and Zuming Hu, ACS Applied Polymer Materials, no. 1, 2019, doi: 10.1021/acsapm.8b00215. keywords: {polyaimde;POSS;Diels−Alder reaction;recycling;dielectric constant} |
