Nature-Inspired Heat and Moisture Exchanger Filters Composed of Gelatin and Chitosan for the Design of Eco-Sustainable “Artificial Noses” AITranslate

Basic Information:

DOI：https://doi.org/10.1021/acsapm.3c00140

Chinese Library Classification Number:

Citation Information:

For long-term mechanical ventilation, during anesthesia or intensive care, it is crucial to preserve a minimum level of humidity to avoid damage to the respiratory epithelium. Heat and moisture exchange filters (HME), also called “artificial noses,” are passive systems that contribute to delivering inspired gases at about the same conditions of healthy respiration, i.e., 32 °C and relative humidity higher than 90%. Current HME devices suffer from limitations linked either to performance and filtration efficiency to their inadequate antibacterial efficiency, sterilization methods, and durability. Furthermore, in times of global warming and diminishing petroleum oil reserves, replacing the employing of synthetic materials with biomass biodegradable raw materials has considerable economic and environmental value. In the present study, a generation of eco-sustainable, bioinspired, and biodegradable HME devices are designed and developed through a green-chemistry process based on raw materials deriving from food waste and taking inspiration from the functioning, structure, and chemistry of our respiratory system. In particular, different blends are obtained by mixing aqueous solutions of gelatin and chitosan in various polymer ratios and concentrations and then by cross-linking them with different low amounts of genipin, a natural chemical cross-linker. Finally, the blends, post-gelation, are freeze-dried to obtain three-dimensional (3D) highly porous aerogels reproducing both the highly exposed surface area of the upper respiratory ways and the chemical composition of the mucus secretion covering the nasal mucosae. Results are comparable with accepted standards for HME devices and suitable bacteriostatic potential, thus validating these bioinspired materials as promising candidates to be used as an eco-sustainable generation of HME devices.