daohang fenxiangbox searchbox qikanlogonew daohangnew searchboxnew navrightzone footerzone paper

Synthesis of a Cross-Linked Polymer Electrolyte Membrane with an Ultra-High Density of Sulfonic Acid Groups AITranslate

Nagoya University; Nagoya University; Nagoya University
AITranslate
Publisher: ACS
Share Citation Information Add to Favorites

    Scan to share on WeChat or Moments

Use WeChat scan.
Share with WeChat friends or Moments

Abstract AITranslate

Sulfonated cross-linked polystyrene membranes, one of the hydrocarbon-based polymer electrolytes membranes (PEMs), are typically synthesized via sulfonation of cross-linked polystyrene. However, it is difficult to prepare a sulfonated cross-linked polystyrene with a high sulfonation level, i.e., a high mole fraction of styrenesulfonic acid unit (fsSA), by using conventional synthetic methods. In this study, to synthesize a relatively homogeneous cross-linked poly(styrenesulfonic acid) (CL-sSA) membrane with an fsSA of 90 mol % or higher, sulfonic acid groups in a styrenesulfonate monomer were protected by esterification, and then a cross-linked polymer was synthesized using the monomer and divinylbenzene. Finally, the cross-linked polymer was converted to CL-sSA by deprotecting the alkyl groups with a base. The conductivity of the CL-sSA membrane at 80 °C and 90% RH was 0.93 S cm–1, which is extremely high and much higher than those of commercially available Nafion 212 and Selemion HSFN membranes with a low fsSA. The synthetic scheme of the CL-sSA membrane used in this study is a very effective route for preparing highly conductive cross-linked PEMs with a high fsSA.

KeyWords AITranslate

crosslinking polymer electrolyte membranes (PEMs) sulfonate ester deprotection poly(4styrenesulfonic acid) proton Show More
No data

Basic Information:

DOI:https://doi.org/10.1021/acsapm.3c00150

Chinese Library Classification Number:

Citation Information:

Sulfonated cross-linked polystyrene membranes, one of the hydrocarbon-based polymer electrolytes membranes (PEMs), are typically synthesized via sulfonation of cross-linked polystyrene. However, it is difficult to prepare a sulfonated cross-linked polystyrene with a high sulfonation level, i.e., a high mole fraction of styrenesulfonic acid unit (fsSA), by using conventional synthetic methods. In this study, to synthesize a relatively homogeneous cross-linked poly(styrenesulfonic acid) (CL-sSA) membrane with an fsSA of 90 mol % or higher, sulfonic acid groups in a styrenesulfonate monomer were protected by esterification, and then a cross-linked polymer was synthesized using the monomer and divinylbenzene. Finally, the cross-linked polymer was converted to CL-sSA by deprotecting the alkyl groups with a base. The conductivity of the CL-sSA membrane at 80 °C and 90% RH was 0.93 S cm–1, which is extremely high and much higher than those of commercially available Nafion 212 and Selemion HSFN membranes with a low fsSA. The synthetic scheme of the CL-sSA membrane used in this study is a very effective route for preparing highly conductive cross-linked PEMs with a high fsSA.

quote

GB/T 7714-2015 [1] Katsumi Sato, Takato Kajita, Atsushi Noro. ACS Applied Polymer Materials, 2023(5). DOI:10.1021/acsapm.3c00150.
MLA [1] Katsumi Sato, et al., ACS Applied Polymer Materials, no. 5, 2023, https://doi.org/10.1021/acsapm.3c00150.
APA [1] Katsumi Sato, Takato Kajita, & Atsushi Noro. (2023). ACS Applied Polymer Materials(5). https://doi.org/10.1021/acsapm.3c00150
IEEE [1] Katsumi Sato, Takato Kajita, and Atsushi Noro, ACS Applied Polymer Materials, no. 5, 2023, doi: 10.1021/acsapm.3c00150. keywords: {crosslinking;polymer electrolyte membranes (PEMs);sulfonate ester;deprotection;poly(4styrenesulfonic acid);proton;Show More}