daohang fenxiangbox searchbox qikanlogonew daohangnew searchboxnew navrightzone footerzone paper

Recoverable Thermo-Responsive Polymeric Surfactants for the Synthesis of Bulk Plastics from Latexes AITranslate

Department of Chemistry, Materials and Chemical Engineering “Giulio Natta”;Department of Chemistry, Materials and Chemical Engineering “Giulio Natta”;Department of Chemistry, Materials and Chemical Engineering “Giulio Natta”
AITranslate
Publisher: ACS
Share Citation Information Add to Favorites

    Scan to share on WeChat or Moments

Use WeChat scan.
Share with WeChat friends or Moments

Abstract AITranslate

Free-radical emulsion polymerization (eFRP) is widely adopted in industries due to the great advantages that this technique offers in terms of a high polymerization rate, good heat management, and conduction in a non-toxic solvent like water. On the other hand, eFRP requires surfactants to stabilize the produced polymer nanoparticles (NPs). At the same time, the recovery of a bulk material from a NP suspension needs the addition of salts or alkali for the destabilization of the emulsion and the precipitation of the polymer. These can contaminate the final product and affect its properties. For this reason, alternative strategies able to coagulate the NP latex avoiding the addition of exogenous compounds are needed. In this work, we synthesized thermo-responsive polymeric surfactants that are able to promote the NP formation during the eFRP and to allow the recovery of the bulk polymer by simply increasing the environment temperature. Surfactants with a tunable hydrophilic–lipophilic balance were produced through reversible-addition fragmentation chain transfer (RAFT) emulsion polymerization by chain-extending a polyethylene glycol-based macromolecular chain transfer agent with butyl methacrylate, in order to obtain a series of block copolymers with high blocking efficiency, controlled molecular weight distribution, and well-defined thermo-responsive behavior. Then, the RAFT agent was removed to avoid the further extension of the block copolymers, and the surfactants were tested in the eFRP of different monomers (i.e., butyl methacrylate, methyl methacrylate, and styrene) to produce stable NP latexes. Finally, the possibility of triggering the NP aggregation and of guaranteeing the recovery of both surfactants and bulk material by simply changing the temperature of the system was assessed.

KeyWords AITranslate

surfactant emulsion polymerization hydrophilic−lipophilic balance HLB RAFT CMC thermoresponsive Show More
No data

Basic Information:

DOI:https://doi.org/10.1021/acsapm.1c01266

Chinese Library Classification Number:

Citation Information:

Free-radical emulsion polymerization (eFRP) is widely adopted in industries due to the great advantages that this technique offers in terms of a high polymerization rate, good heat management, and conduction in a non-toxic solvent like water. On the other hand, eFRP requires surfactants to stabilize the produced polymer nanoparticles (NPs). At the same time, the recovery of a bulk material from a NP suspension needs the addition of salts or alkali for the destabilization of the emulsion and the precipitation of the polymer. These can contaminate the final product and affect its properties. For this reason, alternative strategies able to coagulate the NP latex avoiding the addition of exogenous compounds are needed. In this work, we synthesized thermo-responsive polymeric surfactants that are able to promote the NP formation during the eFRP and to allow the recovery of the bulk polymer by simply increasing the environment temperature. Surfactants with a tunable hydrophilic–lipophilic balance were produced through reversible-addition fragmentation chain transfer (RAFT) emulsion polymerization by chain-extending a polyethylene glycol-based macromolecular chain transfer agent with butyl methacrylate, in order to obtain a series of block copolymers with high blocking efficiency, controlled molecular weight distribution, and well-defined thermo-responsive behavior. Then, the RAFT agent was removed to avoid the further extension of the block copolymers, and the surfactants were tested in the eFRP of different monomers (i.e., butyl methacrylate, methyl methacrylate, and styrene) to produce stable NP latexes. Finally, the possibility of triggering the NP aggregation and of guaranteeing the recovery of both surfactants and bulk material by simply changing the temperature of the system was assessed.

quote

GB/T 7714-2015 [1] Nicolò Manfredini, Mattia Sponchioni, Davide Moscatelli. ACS Applied Polymer Materials, 2022(4). DOI:10.1021/acsapm.1c01266.
MLA [1] Nicolò Manfredini, et al., ACS Applied Polymer Materials, no. 4, 2022, https://doi.org/10.1021/acsapm.1c01266.
APA [1] Nicolò Manfredini, Mattia Sponchioni, & Davide Moscatelli. (2022). ACS Applied Polymer Materials(4). https://doi.org/10.1021/acsapm.1c01266
IEEE [1] Nicolò Manfredini, Mattia Sponchioni, and Davide Moscatelli, ACS Applied Polymer Materials, no. 4, 2022, doi: 10.1021/acsapm.1c01266. keywords: {surfactant;emulsion polymerization;hydrophilic−lipophilic balance;HLB;RAFT;CMC;thermoresponsive;Show More}