daohang fenxiangbox searchbox qikanlogonew daohangnew searchboxnew navrightzone footerzone paper

All-Perovskite Tandem Photoelectrodes for Unassisted Solar Hydrogen Production AITranslate

The University of Toledo; The University of Toledo; The University of Toledo; The University of Toledo; The University of Toledo; The University of Toledo; The University of Toledo;National Renewable Energy Laboratory;National Renewable Energy Laboratory;National Renewable Energy Laboratory; The University of Toledo
AITranslate
Publisher: ACS
Share Citation Information Add to Favorites

    Scan to share on WeChat or Moments

Use WeChat scan.
Share with WeChat friends or Moments

Abstract AITranslate

Unassisted solar water splitting by multijunction tandem photoelectrodes is a sustainable approach to generating green hydrogen fuels. Here, we report on the fabrication of monolithically integrated all-perovskite tandem photocathodes for efficient unassisted solar water splitting. All-perovskite tandem photocathodes wired to an iridium oxide anode deliver a high photovoltage of more than 2 V with an operating photocurrent density of 12.5 mA cm–2 at zero applied bias under simulated AM1.5G 1 sun illumination, yielding a solar-to-hydrogen (STH) conversion efficiency of 15%. The tandem photoelectrode demonstrates continuous operation in water for more than 120 h under simulated 1 sun illumination with less than 5% efficiency loss. A technoeconomic analysis shows the projected production cost of all-perovskite tandem photoelectrodes is $30 m–2, promising a levelized cost of hydrogen of less than $1/kg if sufficient device longevity is realized. This work provides a path toward achieving cost-effective unassisted solar hydrogen fuel production.

KeyWords AITranslate

No data

Basic Information:

DOI:https://doi.org/10.1021/acsenergylett.3c00654

Chinese Library Classification Number:

Citation Information:

Unassisted solar water splitting by multijunction tandem photoelectrodes is a sustainable approach to generating green hydrogen fuels. Here, we report on the fabrication of monolithically integrated all-perovskite tandem photocathodes for efficient unassisted solar water splitting. All-perovskite tandem photocathodes wired to an iridium oxide anode deliver a high photovoltage of more than 2 V with an operating photocurrent density of 12.5 mA cm–2 at zero applied bias under simulated AM1.5G 1 sun illumination, yielding a solar-to-hydrogen (STH) conversion efficiency of 15%. The tandem photoelectrode demonstrates continuous operation in water for more than 120 h under simulated 1 sun illumination with less than 5% efficiency loss. A technoeconomic analysis shows the projected production cost of all-perovskite tandem photoelectrodes is $30 m–2, promising a levelized cost of hydrogen of less than $1/kg if sufficient device longevity is realized. This work provides a path toward achieving cost-effective unassisted solar hydrogen fuel production.

quote

GB/T 7714-2015 [1] Zhaoning Song, Chongwen Li, Lei Chen, et al. ACS Energy Letters, 2023(8). DOI:10.1021/acsenergylett.3c00654.
MLA [1] Zhaoning Song, et al., ACS Energy Letters, no. 8, 2023, https://doi.org/10.1021/acsenergylett.3c00654.
APA [1] Zhaoning Song, Chongwen Li, Lei Chen, Kshitiz Dolia, Sheng Fu, Nannan Sun, You Li, Keenan Wyatt, James L. Young, Todd G. Deutsch, & Yanfa Yan. (2023). ACS Energy Letters(8). https://doi.org/10.1021/acsenergylett.3c00654
IEEE [1] Zhaoning Song, Chongwen Li, Lei Chen, Kshitiz Dolia, Sheng Fu, Nannan Sun, You Li, Keenan Wyatt, James L. Young, Todd G. Deutsch, and Yanfa Yan, ACS Energy Letters, no. 8, 2023, doi: 10.1021/acsenergylett.3c00654.