Trimetallic NiFeMo for Overall Electrochemical Water Splitting with a Low Cell Voltage AITranslate
Abstract AITranslate
We report the development of an efficient and earth-abundant catalyst for electrochemical overall water splitting. Trimetallic NiFeMo alloy is synthesized by hydrothermal deposition from inorganic precursors and subsequent low-temperature thermal annealing. A complete cell made of NiFeMo electrodes on nickel foam exhibits a low voltage of 1.45 V at 10 mA/cm2 as a result of low overpotentials for both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). High-resolution transmission electron microscopy reveals that nanometer-sized single-crystal domains of Ni, Fe, and Mo are intimately integrated at the atomic level, which enables a synergistic effect of metallic Ni, Fe, and Mo for efficient HER, while self-formed Ni–Fe–Mo (oxy)hydroxides on the surface of the NiFeMo anode become active sites for OER. Such a multimetallic alloy and its (oxy)hydroxides represent a typical HER/OER catalyst couple, and our method provides a new route to develop efficient low-cost metallic alloys for overall water splitting.
KeyWords AITranslate
Basic Information:
DOI:https://doi.org/10.1021/acsenergylett.7b01335
Chinese Library Classification Number:
Citation Information:
We report the development of an efficient and earth-abundant catalyst for electrochemical overall water splitting. Trimetallic NiFeMo alloy is synthesized by hydrothermal deposition from inorganic precursors and subsequent low-temperature thermal annealing. A complete cell made of NiFeMo electrodes on nickel foam exhibits a low voltage of 1.45 V at 10 mA/cm2 as a result of low overpotentials for both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). High-resolution transmission electron microscopy reveals that nanometer-sized single-crystal domains of Ni, Fe, and Mo are intimately integrated at the atomic level, which enables a synergistic effect of metallic Ni, Fe, and Mo for efficient HER, while self-formed Ni–Fe–Mo (oxy)hydroxides on the surface of the NiFeMo anode become active sites for OER. Such a multimetallic alloy and its (oxy)hydroxides represent a typical HER/OER catalyst couple, and our method provides a new route to develop efficient low-cost metallic alloys for overall water splitting.
quote
| GB/T 7714-2015 | [1] Fan Qin, Zhenhuan Zhao, Md Kamrul Alam, et al. ACS Energy Letters, 2018(3). DOI:10.1021/acsenergylett.7b01335. |
| MLA | [1] Fan Qin, et al., ACS Energy Letters, no. 3, 2018, https://doi.org/10.1021/acsenergylett.7b01335. |
| APA | [1] Fan Qin, Zhenhuan Zhao, Md Kamrul Alam, Yizhou Ni, Francisco RoblesHernandez, Luo Yu, Shuo Chen, Zhifeng Ren, Zhiming Wang, & Jiming Bao. (2018). ACS Energy Letters(3). https://doi.org/10.1021/acsenergylett.7b01335 |
| IEEE | [1] Fan Qin, Zhenhuan Zhao, Md Kamrul Alam, Yizhou Ni, Francisco RoblesHernandez, Luo Yu, Shuo Chen, Zhifeng Ren, Zhiming Wang, and Jiming Bao, ACS Energy Letters, no. 3, 2018, doi: 10.1021/acsenergylett.7b01335. |
