daohang fenxiangbox searchbox qikanlogonew daohangnew searchboxnew navrightzone footerzone paper

Evaluating the Effect of Photoaging on Polyethylene Permeability: Measurement of the Transport Properties in the Liquid Phase AITranslate

Université Clermont Auvergne;Université Clermont Auvergne;Université Clermont Auvergne
AITranslate
Publisher: ACS
Share Citation Information Add to Favorites

    Scan to share on WeChat or Moments

Use WeChat scan.
Share with WeChat friends or Moments

Abstract AITranslate

The consequences of polyethylene photooxidation on the transmission rate of various permeants in methanolic solution were investigated using a self-designed setup with in-live fluorescence or UV detection. Polyethylene films were subjected to accelerated artificial photoaging, which caused the increase of their polarity owing to the generation of various polar functional groups, e.g., carbonyl and hydroxyl groups, homogeneously distributed within the sample thickness. For nonphotoaged polyethylene, the transmission rate was found to be higher for nonpolar permeants, owing to their higher solubility in a nonpolar polymer. However, after 200 h of photoaging, an important increase in the transmission rate was observed for polar permeants, with no change for nonpolar ones. This may be the consequence of the increase of the polarity of polyethylene during the photoaging process that permits the occurrence of permeant/polymer interactions resulting in an increase of the solubility at the polymer feed side.

KeyWords AITranslate

photooxidation permeability polarity polyethylene fluorescence
No data

Basic Information:

DOI:https://doi.org/10.1021/acsapm.3c02178

Chinese Library Classification Number:

Citation Information:

The consequences of polyethylene photooxidation on the transmission rate of various permeants in methanolic solution were investigated using a self-designed setup with in-live fluorescence or UV detection. Polyethylene films were subjected to accelerated artificial photoaging, which caused the increase of their polarity owing to the generation of various polar functional groups, e.g., carbonyl and hydroxyl groups, homogeneously distributed within the sample thickness. For nonphotoaged polyethylene, the transmission rate was found to be higher for nonpolar permeants, owing to their higher solubility in a nonpolar polymer. However, after 200 h of photoaging, an important increase in the transmission rate was observed for polar permeants, with no change for nonpolar ones. This may be the consequence of the increase of the polarity of polyethylene during the photoaging process that permits the occurrence of permeant/polymer interactions resulting in an increase of the solubility at the polymer feed side.

quote

GB/T 7714-2015 [1] Zhouyun Chen, Julien Christmann, Mohamed Sarakha. ACS Applied Polymer Materials, 2024(6). DOI:10.1021/acsapm.3c02178.
MLA [1] Zhouyun Chen, et al., ACS Applied Polymer Materials, no. 6, 2024, https://doi.org/10.1021/acsapm.3c02178.
APA [1] Zhouyun Chen, Julien Christmann, & Mohamed Sarakha. (2024). ACS Applied Polymer Materials(6). https://doi.org/10.1021/acsapm.3c02178
IEEE [1] Zhouyun Chen, Julien Christmann, and Mohamed Sarakha, ACS Applied Polymer Materials, no. 6, 2024, doi: 10.1021/acsapm.3c02178. keywords: {photooxidation;permeability;polarity;polyethylene;fluorescence}