daohang fenxiangbox searchbox qikanlogonew daohangnew searchboxnew navrightzone footerzone paper

Durability of self-compacting rubberized concrete exposed to external sulphate attack AITranslate

University of Sfax;Univ Gustave Eiffel;Tunis El Manar University;University of Sfax
AITranslate
Publisher: Elsevier
Share Citation Information Add to Favorites

    Scan to share on WeChat or Moments

Use WeChat scan.
Share with WeChat friends or Moments

Abstract AITranslate

This study evaluated the performance of self-compacting rubberized concrete against external sulphate attack (ESA). cylinders 100 mm in diameter and 220 mm in length of control concrete (no rubber) and rubberized concrete were prepared and tested by visual inspection to identify visible degradation, length and mass variations of specimens, compressive strength, water-accessible porosity, mercury intrusion porosimetry (MIP), and thermal decomposition obtained from thermogravimetric analysis (TGA). Results show that the incorporation of up to 15% rubber enhances the performance against ESA. Rubber reduced the expansion strains and compressive strength. All immersed specimens did not have visible cracks around them. Water porosity was found to increase or decrease versus the time of sulphate immersion. As a result, the impact of rubber on porosity variation is significantly less than the effect of the sulphate-hydrate reaction. Thermogravimetric analysis showed a decrease in portlandite, which is not related to rubber incorporation.

KeyWords AITranslate

Selfcompacting rubberized concrete Sulphate attack Mercury intrusion porosimetry Thermogravimetric analysis Compressive strength
No data

Basic Information:

DOI:https://doi.org/10.1016/j.cscm.2023.e02730

Chinese Library Classification Number:

Citation Information:

This study evaluated the performance of self-compacting rubberized concrete against external sulphate attack (ESA). cylinders 100 mm in diameter and 220 mm in length of control concrete (no rubber) and rubberized concrete were prepared and tested by visual inspection to identify visible degradation, length and mass variations of specimens, compressive strength, water-accessible porosity, mercury intrusion porosimetry (MIP), and thermal decomposition obtained from thermogravimetric analysis (TGA). Results show that the incorporation of up to 15% rubber enhances the performance against ESA. Rubber reduced the expansion strains and compressive strength. All immersed specimens did not have visible cracks around them. Water porosity was found to increase or decrease versus the time of sulphate immersion. As a result, the impact of rubber on porosity variation is significantly less than the effect of the sulphate-hydrate reaction. Thermogravimetric analysis showed a decrease in portlandite, which is not related to rubber incorporation.

quote

GB/T 7714-2015 [1] Jihen Mallek, Othman OmikrineMetalssi, Amara Loulizi, et al. Case Studies in Construction Materials, 2024(20). DOI:10.1016/j.cscm.2023.e02730.
MLA [1] Jihen Mallek, et al., Case Studies in Construction Materials, no. 20, 2024, https://doi.org/10.1016/j.cscm.2023.e02730.
APA [1] Jihen Mallek, Othman OmikrineMetalssi, Amara Loulizi, & Atef Daoud. (2024). Case Studies in Construction Materials(20). https://doi.org/10.1016/j.cscm.2023.e02730
IEEE [1] Jihen Mallek, Othman OmikrineMetalssi, Amara Loulizi, and Atef Daoud, Case Studies in Construction Materials, no. 20, 2024, doi: 10.1016/j.cscm.2023.e02730. keywords: {Selfcompacting rubberized concrete;Sulphate attack;Mercury intrusion porosimetry;Thermogravimetric analysis;Compressive strength}