Preparation of Well-Compatibilized PP/PC Blends and Foams Thereof AITranslate

Basic Information:

DOI：https://doi.org/10.1021/acsapm.1c00813

Chinese Library Classification Number:

Citation Information:

The performance of polypropylene-poly(ethylene brassylate) block and graft copolymers and a polypropylene-polycaprolactone graft copolymer as compatibilizers for polypropylene-rich polypropylene/bisphenol A polycarbonate (PP/PC, 80/20 wt/wt) blends was elucidated. The copolymers were synthesized either by metal-catalyzed ring-opening polymerization or transesterification of a presynthesized polyester, initiated by hydroxyl-functionalized PPs, which themselves were obtained by catalytic routes or reactive extrusion, respectively. Spectroscopic fingerprints of the copolymers from liquid-state nuclear magnetic resonance (NMR) in combination with scanning electron microscopy (SEM), transmission electron microscopy (TEM), atomic force microscopy (AFM), dynamic mechanical thermal analysis (DMTA), and rheology analyses of the blends indicated that the compatibilizers spontaneously organize at the interface of the two immiscible polymers leading to the formation of uniform, stable, nanophase morphologies. The effect of the compatibilizers on the performance of the PP/PC blends was evaluated, and well-compatibilized PP/PC blends showed improved melt strength and strain hardening when compared to pure PP. This was verified by the successful foam extrusion using isobutane as a blowing agent of well-compatibilized PP/PC blends to low-density PP-based foams, for which normally long-chain branched PP is required.