daohang fenxiangbox searchbox qikanlogonew daohangnew searchboxnew navrightzone footerzone paper

Experimental Study on Preparation of ZrO_2 Hollow Ball by Hydrothermal Synthesis AITranslate

School of Metallurgy and Ecological Engineering, Beijing University of Science and Technology;School of Metallurgy and Ecological Engineering, Beijing University of Science and Technology;School of Metallurgy and Ecological Engineering, Beijing University of Science and Technology;School of Metallurgy and Ecological Engineering, Beijing University of Science and Technology;School of Metallurgy and Ecological Engineering, Beijing University of Science and Technology
AITranslate
Publisher: Editorial Office of Rare Metals and Cemented Carbides
Share Citation Information Add to Favorites

    Scan to share on WeChat or Moments

Use WeChat scan.
Share with WeChat friends or Moments

Abstract AITranslate

Dispersed carbon balls were prepared by hydrothermal synthesis with sucrose as raw material at first, and then they were used as the template to prepare ZrO2+/carbon ball composite by solution adsorp- tion. Finally, carbon ball template was removed by calcination to synthesize ZrO2 hollow balls. The effects were studied of adsorbing conditions on ZrO2+ adsorption and heating rate of calcination on ZrO2 hollow ball forming. The results show that the adsorption of Zr4+ has the best effect and Zr4+ adsorption amount is 2 114 mg/g carbon ball under the optimal conditions as follows: carbon ball particle size of about 400 nm,ethanol concentration of 25 % (volume fraction), ZrO2+ concentration of 0.4 mol/L, adsorption tem- perature of 70 ℃ and solution pH of 0.7. When the heating rate of calcination for carbon template removal is controlled at 2 ℃/min, dispersed ZrO2 hollow balls can be obtained. Too high heating rate of calcination leads to aggregation of some ZrO2 hollow balls.

KeyWords AITranslate

ZrO2 hollow ball ZrO2+ adsorption carbon ball template adsorption condition heating rate ofcalcination

1马维,潘文霞,吴承康.热障涂层材料性能和失效机理研究进展[J].力学进展,2003,33(4):548-559. 被引量:18

2李其连.等离子喷涂ZrO_2热障涂层热冲击破坏研究[J].中国表面工程,2004,17(3):17-20. 被引量:21

3何蕾,孙东峰,汪庭语,徐要辉,李锐星.无模板溶剂热法合成高吸附活性的CeO_2纳米空心球[J].稀有金属,2016,40(5):429-434. 被引量:8

4江峰,李洒,彭志坚,汪长安.利用碳模板制备ZrO_2亚微米空心球[J].硅酸盐学报,2014,42(9):1087-1091. 被引量:5

1张智涛,张帅,侯玉婷,颜世宇,沈少波.亚微米Gd-Sc-YSZ空心球粉常温电泳沉积于高温合金表面制备热障涂层[J].材料研究与应用,2017,11(4):224-229. 被引量:2

2胡其国,顾幸勇,董伟霞,罗婷,邱柏欣.莫来石空心球的制备与表征[J].人工晶体学报,2018,47(3):578-581. 被引量:2

3张帅,田金龙,孔庆毛,陈杨,沈少波.Gd-Yb-YSZ热障涂层的低成本制备及表征[J].稀有金属与硬质合金,2019,47(5):43-48.

1胡其国,顾幸勇,董伟霞,罗婷,邱柏欣.FAFB与Al(OH)_3质量比对莫来石质材料显微结构及性能的影响[J].硅酸盐通报,2018,37(8):2512-2515.

2胡其国,顾幸勇,董伟霞,罗婷,邱柏欣.莫来石空心球的显微结构及其性能[J].陶瓷学报,2019,40(1):28-32. 被引量:3

3张帅,田金龙,孔庆毛,陈杨,沈少波.Gd-Yb-YSZ热障涂层的低成本制备及表征[J].稀有金属与硬质合金,2019,47(5):43-48.

4杨明,李玉花,李明.热障涂层制备方法的研究现状[J].湖北理工学院学报,2021,37(3):33-38. 被引量:4

1李杨,朱玉涛,郭敏,张梅.含钛电炉熔分渣制备4A分子筛及其吸附性能[J].北京科技大学学报,2014,36(12):1656-1665. 被引量:1

2李玉兰.用水热合成法制备陶瓷粉体[J].国外稀有金属动态,1991(17):14-16.

3陈凌,曾亚,张贤明,欧阳平,刘先斌.高炉渣与活性白土吸附废润滑油对比研究[J].应用化工,2017,46(5):916-918. 被引量:4

4卞小冬,宋广君,李晓,宋沛.某黄金精炼厂贫液吸附HCN试验研究[J].黄金科学技术,2015,23(3):89-92.

5刘勇,谢克强,马文会,魏奎先,肖鹏,杨时聪.杂铜阳极泥综合回收有价金属实验研究[J].昆明理工大学学报:自然科学版,2017,42(2):8-14. 被引量:3

6胡国荣,李国,邓新荣,彭忠东,曹雁冰.针铁矿法从铬铁合金硫酸浸出液中除铁[J].湿法冶金,2006,25(4):198-201. 被引量:22

7何佳,赵文雅,何敏,刘新星,董海刚,谢建平.大肠杆菌吸附某工业废水中Pt(Ⅳ)、Pd(Ⅱ)的研究[J].贵金属,2015,36(A01):152-156. 被引量:2

8吴晓华,李小斌,周秋生,陈滨.表面活性剂PEG3000强化铝酸钠溶液晶种分解的研究[J].材料研究与应用,2006(4):243-246. 被引量:1

9李骞,饶雪飞,徐斌,杨永斌,刘婷,姜涛,胡龙.还原酸浸法从锰锌复合矿中综合回收锰和锌(英文)[J].中国有色金属学报:英文版,2017,27(5):1172-1179. 被引量:4

10张卫华,张雪良,王峰,李京社,杨树峰.八流中间包控流装置优化水模实验[J].工业加热,2017,46(2):30-32. 被引量:2

Basic Information:

DOI:

Chinese Library Classification Number:TF125.4[冶金工程—粉末冶金]

Citation Information:

Dispersed carbon balls were prepared by hydrothermal synthesis with sucrose as raw material at first, and then they were used as the template to prepare ZrO2+/carbon ball composite by solution adsorp- tion. Finally, carbon ball template was removed by calcination to synthesize ZrO2 hollow balls. The effects were studied of adsorbing conditions on ZrO2+ adsorption and heating rate of calcination on ZrO2 hollow ball forming. The results show that the adsorption of Zr4+ has the best effect and Zr4+ adsorption amount is 2 114 mg/g carbon ball under the optimal conditions as follows: carbon ball particle size of about 400 nm,ethanol concentration of 25 % (volume fraction), ZrO2+ concentration of 0.4 mol/L, adsorption tem- perature of 70 ℃ and solution pH of 0.7. When the heating rate of calcination for carbon template removal is controlled at 2 ℃/min, dispersed ZrO2 hollow balls can be obtained. Too high heating rate of calcination leads to aggregation of some ZrO2 hollow balls.

quote

GB/T 7714-2015 [1] GUO Jin-lei, SHEN Shao-bo, ZHAO Ying-shi, et al. Experimental Study on Preparation of ZrO_2 Hollow Ball by Hydrothermal Synthesis[J]. Rare Metals and Cemented Carbides, 2017(2): 55-59.
MLA [1] GUO Jin-lei, et al., "Experimental Study on Preparation of ZrO_2 Hollow Ball by Hydrothermal Synthesis." Rare Metals and Cemented Carbides, no. 2, 2017, pp. 55-59.
APA [1] GUO Jin-lei, SHEN Shao-bo, ZHAO Ying-shi, JI Yi-long, & ZHANG Zhi-tao. (2017). Experimental Study on Preparation of ZrO_2 Hollow Ball by Hydrothermal Synthesis. Rare Metals and Cemented Carbides(2), 55-59.
IEEE [1] GUO Jin-lei, SHEN Shao-bo, ZHAO Ying-shi, JI Yi-long, and ZHANG Zhi-tao, "Experimental Study on Preparation of ZrO_2 Hollow Ball by Hydrothermal Synthesis," Rare Metals and Cemented Carbides, no. 2, pp. 55-59, 2017. keywords: {ZrO2 hollow ball;ZrO2+ adsorption;carbon ball template;adsorption condition;heating rate ofcalcination}