Study on Microstructure and Properties of W-20%Cu Composite Material Prepared by SPS AITranslate
Abstract AITranslate
W-20%Cu composite material was successfully prepared by SPS with W-20%Cu(mass fraction)composite powders as raw materials obtained by hydrothermal synthesis-coreduction,and its microstructure and properties were analyzed and studied.The results show that with the increase of sintering temperature and heat preservation time,microstructure distribution of W and Cu is more uniform with less porosity,and density,hardness and electrical conductivity of W-20%Cu composite material are subsequently increased.Under the conditions of sintering temperature 950 ℃ and heat preservation time 5min,the density,hardness and electrical conductivity of W-20%Cu composite material are 98.9%,HV222.8and 21.7 MS/m,respectively.
KeyWords AITranslate
1章桥新.Microstructure and Properties of W-15Cu Alloys Prepared by Mechanical Alloying and Spark Plasma Sintering Process[J].武汉理工大学学报：材料科学英文版,2008,23(3):399-402. 被引量：2
2张久兴,张忻,岳明,周美玲,左铁镛.放电等离子烧结技术与新材料研究[J].功能材料信息,2004,1(3):14-21. 被引量：10
3冯海波,周玉,贾德昌.放电等离子烧结技术的原理及应用[J].材料科学与工艺,2003,11(3):327-331. 被引量：61
4张久兴,刘科高,周美玲.放电等离子烧结技术的发展和应用[J].粉末冶金技术,2002,20(3):129-134. 被引量：142
5Qiaoxin Zhang,Xiaoliang Shi,Hua Yang,Xinglong Duan.Microstructure and properties of W-15Cu alloys prepared by mechanical alloying and spark plasma sintering process[J]. Journal of Wuhan University of Technology - Mater. Sci. Ed. . 2008 (3)
6I. Sabirov,R. Pippan.Formation of a W–25%Cu nanocomposite during high pressure torsion[J]. Scripta Materialia . 2005 (12)
7Dae-Gun Kim,Gil-Su Kim,Myung-Jin Suk,Sung-Tag Oh,Young Do Kim.Effect of heating rate on microstructural homogeneity of sintered W–15wt%Cu nanocomposite fabricated from W–CuO powder mixture[J]. Scripta Materialia . 2004 (7)
8S.S Ryu,Y.D Kim,I.H Moon.Dilatometric analysis on the sintering behavior of nanocrystalline W–Cu prepared by mechanical alloying[J]. Journal of Alloys and Compounds . 2002 (1)
9Hungria T.,Castro A.,Galy J.Spark plasma sintering as a useful technique to the nanostructuration of piezo-ferroelectric materials. Advanced Engineering Materials . 2009
1李剑,马尧,梁力行,王海龙,张锐.放电等离子烧结聚晶立方氮化硼刀具的性能[J].机械工程材料,2019,43(1):8-12. 被引量：1
1林芳芳.WC-B-Al_(2)O_(3)作结合剂的聚晶立方氮化硼复合材料性能研究[J].矿冶工程,2022,42(4):164-166. 被引量：3
1刘涛,范景莲,成会朝,田家敏.W-20%Cu超细复合粉末的制备和烧结[J].粉末冶金技术,2007,25(4):259-261. 被引量：9
2张福斌,胡艳玲,胡业奇,许龙山,胡柏新.溶胶凝胶法制备超细W-Ag复合粉末[J].粉末冶金工业,2015,25(1):14-18. 被引量：4
3范景莲,刘军,严德剑,黄伯云.细晶钨铜复合材料制备工艺的研究[J].粉末冶金技术,2004,22(2):83-86. 被引量：46
4张迎晖,田海霞,朱根松,秦镜.碳纳米管对W-Cu复合材料致密度和硬度的影响[J].有色金属科学与工程,2012,3(3):33-35.
5Р.,ОГ.带入杂质沿变形时低合金化钨合金组织的再分布[J].钨钼材料,1993(2):35-38.
6董长升.掺杂三氧化二钕对钼丝显微组织和性能影响的研究[J].稀有金属材料与工程,1994,23(6):46-51. 被引量：1
7汪峰涛,吴玉程,王涂根,任榕.W-Cu纳米晶粉体的制备及表征[J].功能材料,2007,38(A06):2062-2065. 被引量：1
8陈春浩,薛丽红,史昆玉,沈涛,严有为,李乃湖,李慧杰.高能球磨时间对W-Cu纳米晶复合粉体组织和性能的影响[J].粉末冶金材料科学与工程,2011,16(6):832-836. 被引量：4
9朱旺喜.外刊科技文摘[J].中国钨业,1994,0(11):34-35.
10胡保全,白培康,程军.机械合金化法制备低质量分数Mo-Cu合金[J].功能材料,2010,41(5):837-839. 被引量：4
Basic Information:
DOI：
Chinese Library Classification Number:TF124.5[冶金工程—粉末冶金]
Citation Information:
W-20%Cu composite material was successfully prepared by SPS with W-20%Cu(mass fraction)composite powders as raw materials obtained by hydrothermal synthesis-coreduction,and its microstructure and properties were analyzed and studied.The results show that with the increase of sintering temperature and heat preservation time,microstructure distribution of W and Cu is more uniform with less porosity,and density,hardness and electrical conductivity of W-20%Cu composite material are subsequently increased.Under the conditions of sintering temperature 950 ℃ and heat preservation time 5min,the density,hardness and electrical conductivity of W-20%Cu composite material are 98.9%,HV222.8and 21.7 MS/m,respectively.
quote
| GB/T 7714-2015 | [1] ZHAO Jing-jing, LI Ji-wen, ZHANG Pan-long, et al. Study on Microstructure and Properties of W-20%Cu Composite Material Prepared by SPS[J]. Rare Metals and Cemented Carbides, 2015(2): 17-21. |
| MLA | [1] ZHAO Jing-jing, et al., "Study on Microstructure and Properties of W-20%Cu Composite Material Prepared by SPS." Rare Metals and Cemented Carbides, no. 2, 2015, pp. 17-21. |
| APA | [1] ZHAO Jing-jing, LI Ji-wen, ZHANG Pan-long, & WEI Shi-zhong. (2015). Study on Microstructure and Properties of W-20%Cu Composite Material Prepared by SPS. Rare Metals and Cemented Carbides(2), 17-21. |
| IEEE | [1] ZHAO Jing-jing, LI Ji-wen, ZHANG Pan-long, and WEI Shi-zhong, "Study on Microstructure and Properties of W-20%Cu Composite Material Prepared by SPS," Rare Metals and Cemented Carbides, no. 2, pp. 17-21, 2015. keywords: {hydrothermal synthesis-coreduction;spark plasma sintering;W-20%Cu composite material;property;microstructure} |