Research on the Microstructure and Property of TC11-based Alloy with Nb-impregnated Surface AITranslate
Abstract AITranslate
Surface Nb impregnation on TC11-based alloy is done by DGPSAT process.Microstructure,composition,phases and elastic modulus of the Nb-impregnated TC11 alloy layer were analyzed through scanning electron microscopy（SEM）,energy dispersive spectroscopy（EDS）,X-ray diffraction（XRD） and nanoindenter tester respectively.The result indicated that the Nb element is distributed in graded pattern throughout the impregnation layer layer,which are mainly composed of Nb substituted solid solution formed in β-Ti（Nb） and AlNb2 phase effective thickness of the impreganation layer was up to 14 μm.After Nb impregnation,the nano-hardness of TC11 was 1.9 times higher,while the elastic modulus was slightly lower than that of the substrate.
KeyWords AITranslate
1罗联,林建国,翟甲友,王锋华,马蓦.Nb含量及相结构对TiNb二元合金系腐蚀性能的影响[J].稀有金属快报,2008,27(3):23-27. 被引量：2
2Hemson R.New titanium-niobium alloy solves autoclave problem[J].Advanced Materials and Processes,1995,(5):27-28.
3徐重.等离子表面冶金技术的现状与发展[J].中国工程科学,2002,4(2):36-41. 被引量：99
4Xu Zhong,Gu Fengying,Pan Junde,et al.Plasma surface alloying[J].Surface Engineering,1986,2(2):103-106.
5张平则,徐重,张高会,贺志勇.双辉等离子表面冶金Ti-Cu阻燃合金的制备工艺[J].中国有色金属学报,2005,15(1):110-115. 被引量：11
6王文波,徐重,贺志勇,王振霞,张平则.双辉技术渗铌对Ti-6Al-4V合金氧化性能的影响[J].稀有金属材料与工程,2007,36(5):869-873. 被引量：9
7王文波,贺志勇,王振霞,徐重.双辉等离子表面合金化技术形成表面阻燃钛合金的展望[J].世界科技研究与发展,2005,27(3):37-40. 被引量：7
8Jiann-Shiung Chen,Jenq-Gong Duh.Indentation behavior and Young's modulus evaluation in electroless Ni modified CrN coating on mild steel[J].Surface and Coatings Technology,2001,139(1):6-13.
9王俊隆.合金化元素对弹性模量的影响.稀有金属,1979,(4):1-10.
1周朴,缪强,张平则,徐重.Q235等离子渗Nb改性层在5%H_2SO_4中的腐蚀性能[J].江苏航空,2008(S1):149-151. 被引量：1
2华云峰,李争显,黄春良,杜继红,骆瑞雪.C/C复合材料表面双层辉光等离子制备铼涂层研究[J].稀有金属材料与工程,2012,41(11):2013-2016. 被引量：3
3段良辉,刘亚萍,彭建盛,郭朝丽,潘俊德.Ti6Al4V辉光等离子渗铝摩擦磨损性能研究[J].表面技术,2007,36(1):5-7. 被引量：2
4蔡航伟,高原,马志康,王成磊,张焱,吴炜钦.0Cr18Ni9Ti不锈钢表面等离子渗锆合金层的研究[J].真空科学与技术学报,2013,33(11):1133-1138. 被引量：9
5魏祥飞,张平则,魏东博,沙李丽,周鹏,张扬.γ-TiAl合金表面双层辉光等离子铬钨共渗层的高温氧化行为[J].机械工程材料,2014,38(5):12-16. 被引量：2
6高原,王成磊,刘燕萍,徐晋勇.双层辉光等离子制备TiN渗镀层的耐蚀性能[J].材料热处理学报,2011,32(6):143-147. 被引量：6
7顾雪冬,姚正军,朱晓林,张平则,徐重.45钢表面双层辉光等离子渗铝[J].金属热处理,2008,33(6):61-64. 被引量：3
8徐江,谢锡善,徐重.利用双层辉光等离子技术进行镍基耐蚀合金表面合金化的研究[J].材料热处理学报,2002,23(1):28-31. 被引量：7
9陆小会,高原,韦文竹,张光耀,王成磊.不锈钢表面等离子渗铪及渗碳后的抗高温氧化行为[J].稀有金属材料与工程,2016,45(8):2026-2030. 被引量：1
10唐长斌,刘道新,李凡巧,唐宾,秦林.Ti6Al4V合金表面离子铌合金化及其耐磨性能研究[J].金属热处理,2010,35(10):1-6. 被引量：2
Basic Information:
DOI：
Chinese Library Classification Number:TG178[金属学及工艺—金属表面处理]
Citation Information:
Surface Nb impregnation on TC11-based alloy is done by DGPSAT process.Microstructure,composition,phases and elastic modulus of the Nb-impregnated TC11 alloy layer were analyzed through scanning electron microscopy（SEM）,energy dispersive spectroscopy（EDS）,X-ray diffraction（XRD） and nanoindenter tester respectively.The result indicated that the Nb element is distributed in graded pattern throughout the impregnation layer layer,which are mainly composed of Nb substituted solid solution formed in β-Ti（Nb） and AlNb2 phase effective thickness of the impreganation layer was up to 14 μm.After Nb impregnation,the nano-hardness of TC11 was 1.9 times higher,while the elastic modulus was slightly lower than that of the substrate.
quote
| GB/T 7714-2015 | [1] ZHOU Jin, ZHANG Ping-ze, HUANG Jun. Research on the Microstructure and Property of TC11-based Alloy with Nb-impregnated Surface[J]. Rare Metals and Cemented Carbides, 2010(2): 22-25. |
| MLA | [1] ZHOU Jin, et al., "Research on the Microstructure and Property of TC11-based Alloy with Nb-impregnated Surface." Rare Metals and Cemented Carbides, no. 2, 2010, pp. 22-25. |
| APA | [1] ZHOU Jin, ZHANG Ping-ze, & HUANG Jun. (2010). Research on the Microstructure and Property of TC11-based Alloy with Nb-impregnated Surface. Rare Metals and Cemented Carbides(2), 22-25. |
| IEEE | [1] ZHOU Jin, ZHANG Ping-ze, and HUANG Jun, "Research on the Microstructure and Property of TC11-based Alloy with Nb-impregnated Surface," Rare Metals and Cemented Carbides, no. 2, pp. 22-25, 2010. keywords: {double-glow plasma;TC11;surface Nb impregnation;nano-indentation;nano-hardness;elastic modulus} |