Characterization of Re Distribution in W-Re Alloy by Electron Probe with Spectrometer AITranslate
Abstract AITranslate
In view of adjacent atomic number, the uniformity of tungsten rhenium alloy is difficult to charac- terize. The tungsten rhenium alloy morphology of polished section is characterized by SEI and BEI. The high rhenium region and the low Re region in the polished section of tungsten rhenium alloy were success- fully classified through a scanning electron microscope with spectrometer. The distribution of Re element in -Re alloy is shown clearly. In addition, the feasibility of this method is analyzed theoretically, as can pro- vide reference for the analysis of the uniformity of the alloys of adjacent elements such as W-Re.
KeyWords AITranslate
1Wang Jinshu,Lili Li,Liu Wei,et al. A study of scandia and rhenium doped tungsten matrix dispenser cathode [J]. J Solid State Sciences, 2007,9 : 927-930.
2GB/T 15074-2008.电子探针定量分析方法通则[S].
3GB/T15616-2008,金属及合金的电子探针定量分析方法[S].
4贺利氏公司.用作沉积源的高密度、低氧Re和Re基固结粉末材料及其制造方法[P].中国专利:101230426,2008-07-30.
1王赛玉.薄板不锈钢制品中“麻点”缺陷分析[J].热加工工艺,2005(8):61-62. 被引量：3
2张寿禄,袁刚,韩静涛.超级双相不锈钢00Cr25Ni7Mo4N固溶热处理组织的研究[J].物理测试,2010,28(3):9-11. 被引量：12
3何平,苏丽君.WC-Co-Ni硬质合金断裂行为的观察与分析[J].粉末冶金材料科学与工程,1996,1(2):51-54. 被引量：2
4吴建设,何平.WC-Co-Ni硬质合金断裂行为的观察与分析[J].稀有金属与硬质合金,1998,26(3):7-11. 被引量：4
5何平.WC-Co-Ni硬质合金微观组织与抗弯强度[J].硬质合金,1996,13(2):78-81.
6曾强,侯淑娥,范映伟.IC6合金动态拉伸过程原位观测[J].航空材料学报,2003,23(z1):143-146. 被引量：1
7张寿禄,赵泳仙,宋丽强.超级双相不锈钢00Cr25Ni7Mo4N中χ相时效析出的研究[J].钢铁,2012,47(2):72-75. 被引量：5
8朱峰,伍超群,刘英坤.电子探针在6063铝合金均匀化处理中的应用[J].理化检验：物理分册,2013,49(1):34-38. 被引量：3
9王艳丽,李时磊,彭凌剑,林均品,陈国良.Mn含量对铸造高铌TiAl合金组织和性能的影响[J].北京科技大学学报,2009,31(2):198-202.
10曾真,信运昌,王茂银,刘庆.孪晶类型对AZ31镁合金静态再结晶的影响[J].材料热处理学报,2012,33(8):33-38. 被引量：6
Basic Information:
DOI：
Chinese Library Classification Number:TG146.411[金属学及工艺—金属材料]
Citation Information:
In view of adjacent atomic number, the uniformity of tungsten rhenium alloy is difficult to charac- terize. The tungsten rhenium alloy morphology of polished section is characterized by SEI and BEI. The high rhenium region and the low Re region in the polished section of tungsten rhenium alloy were success- fully classified through a scanning electron microscope with spectrometer. The distribution of Re element in -Re alloy is shown clearly. In addition, the feasibility of this method is analyzed theoretically, as can pro- vide reference for the analysis of the uniformity of the alloys of adjacent elements such as W-Re.
quote
| GB/T 7714-2015 | [1] WANG Zhe, LI Yun-bo, ZHUO Ming-chuan, et al. Characterization of Re Distribution in W-Re Alloy by Electron Probe with Spectrometer[J]. Rare Metals and Cemented Carbides, 2011(4): 47-49. |
| MLA | [1] WANG Zhe, et al., "Characterization of Re Distribution in W-Re Alloy by Electron Probe with Spectrometer." Rare Metals and Cemented Carbides, no. 4, 2011, pp. 47-49. |
| APA | [1] WANG Zhe, LI Yun-bo, ZHUO Ming-chuan, XIAO Yang, HOU Zhan-jie, & ZHU Yu-bin. (2011). Characterization of Re Distribution in W-Re Alloy by Electron Probe with Spectrometer. Rare Metals and Cemented Carbides(4), 47-49. |
| IEEE | [1] WANG Zhe, LI Yun-bo, ZHUO Ming-chuan, XIAO Yang, HOU Zhan-jie, and ZHU Yu-bin, "Characterization of Re Distribution in W-Re Alloy by Electron Probe with Spectrometer," Rare Metals and Cemented Carbides, no. 4, pp. 47-49, 2011. keywords: {tungsten rhenium alloy;uniformity;SEI;BSEI;section scanning with spectrometer} |