daohang fenxiangbox searchbox qikanlogonew daohangnew searchboxnew navrightzone footerzone paper

Thiourea-Based Soft Actuators from Photo-triggered Fluoride Generation and Amplification AITranslate

Sungkyunkwan University; Sungkyunkwan University; Sungkyunkwan University; Sungkyunkwan University; Sungkyunkwan University
AITranslate
Publisher: ACS
Share Citation Information Add to Favorites

    Scan to share on WeChat or Moments

Use WeChat scan.
Share with WeChat friends or Moments

Abstract AITranslate

The development of soft actuators is an important research area due to their wide application range, specifically for biomimetic soft robotics. Photo-responsive or -triggered actuators have also gained much attention, mainly because they allow for remote triggering with spatial and temporal control. In this study, we prepare bilayer actuators composed of thiourea (TU) networks integrated with fluoride-generating and fluoride-amplifying molecules. These molecules demonstrate fluoride generation and amplification inside the TU actuators by UV irradiation. The photo-triggered TU actuators produce relatively large deformations due to the volume contraction of the TU films with binding of photo-generated and amplified fluoride. The bound fluoride can be removed by a protonation process using a protic solvent that allows the photo-active TU actuators to be recycled. Such photo-triggered TU actuators are potentially useful for micromechanical systems, such as robotic arms, oscillators, and transmission devices.

KeyWords AITranslate

thiourea anion responsiveness photogenerated fluoride fluoride amplification phototriggered actuator
No data

Basic Information:

DOI:https://doi.org/10.1021/acsapm.0c01420

Chinese Library Classification Number:

Citation Information:

The development of soft actuators is an important research area due to their wide application range, specifically for biomimetic soft robotics. Photo-responsive or -triggered actuators have also gained much attention, mainly because they allow for remote triggering with spatial and temporal control. In this study, we prepare bilayer actuators composed of thiourea (TU) networks integrated with fluoride-generating and fluoride-amplifying molecules. These molecules demonstrate fluoride generation and amplification inside the TU actuators by UV irradiation. The photo-triggered TU actuators produce relatively large deformations due to the volume contraction of the TU films with binding of photo-generated and amplified fluoride. The bound fluoride can be removed by a protonation process using a protic solvent that allows the photo-active TU actuators to be recycled. Such photo-triggered TU actuators are potentially useful for micromechanical systems, such as robotic arms, oscillators, and transmission devices.

quote

GB/T 7714-2015 [1] Seonggyun Ha, Juhyen Lee, Chae Yeon Ha, et al. ACS Applied Polymer Materials, 2021(3). DOI:10.1021/acsapm.0c01420.
MLA [1] Seonggyun Ha, et al., ACS Applied Polymer Materials, no. 3, 2021, https://doi.org/10.1021/acsapm.0c01420.
APA [1] Seonggyun Ha, Juhyen Lee, Chae Yeon Ha, Hye Jun Kim, & Changsik Song. (2021). ACS Applied Polymer Materials(3). https://doi.org/10.1021/acsapm.0c01420
IEEE [1] Seonggyun Ha, Juhyen Lee, Chae Yeon Ha, Hye Jun Kim, and Changsik Song, ACS Applied Polymer Materials, no. 3, 2021, doi: 10.1021/acsapm.0c01420. keywords: {thiourea;anion responsiveness;photogenerated fluoride;fluoride amplification;phototriggered actuator}