daohang fenxiangbox searchbox qikanlogonew daohangnew searchboxnew navrightzone footerzone paper

Effect of Heat Treatment Conditions on Properties of WC-Co Coating AITranslate

Jiangxi Institute of Tungsten and Rare Earth;Jiangxi Institute of Tungsten and Rare Earth;Jiangxi Institute of Tungsten and Rare Earth;Jiangxi Institute of Tungsten and Rare Earth;Jiangxi Institute of Tungsten and Rare Earth
AITranslate
Publisher: Editorial Office of Rare Metals and Cemented Carbides
Share Citation Information Add to Favorites

    Scan to share on WeChat or Moments

Use WeChat scan.
Share with WeChat friends or Moments

Abstract AITranslate

WC-Co composite powder prepared by spray conversion was used to prepare WC-Co wear-resis-tant coating by HVOF spraying,and then heat treatment of the coating was performed at 550 ℃,750 ℃ and 950 ℃ in N2 and vacuum atmosphere,respectively.The effects of heat treatment conditions on phase,microstructure,hardness and wear resistance of the coating were studied.The results show that the coating heat-treated in vacuum atmosphere has lower decarburization degree and porosity than the coating heat-treated in N2 atmosphere.The hardness and the wear resistance of the coating can be significantly improve through heat treatment in vacuum atmosphere.The wear rate of the coating heat-treated in vacuum at 750 ℃ can be reduced to 47% of that of the sprayed coating,and its HV0.3 hardness reaches 1 550.

KeyWords AITranslate

WC-Co coating spray conversion high-velocity oxygen-fuel(HVOF)spraying heat treatment atmosphere temperature

1王大锋,张波萍,贾成厂,高峰,于月光,赵晓琳,白智辉.WC粉末粒度对超音速火焰喷涂WC-CoCr涂层组织性能的影响[J].粉末冶金工业,2017,27(2):58-65. 被引量:8

2于方丽,白宇,谢辉,刘银超,王海军,吴九汇.超音速等离子喷涂制备金属陶瓷涂层的抗冲蚀性能[J].稀有金属材料与工程,2018,47(6):1884-1889. 被引量:3

3王学政,王海滨,刘雪梅,杨涛,宋晓艳.抑制剂对WC-Co硬质合金涂层性能的影响[J].无机材料学报,2017,32(8):813-818. 被引量:5

4王海滨,宋晓艳,刘雪梅,王学政,贺定勇.WC-Co复合粉末的原位合成及于硬质合金涂层制备中的应用[J].表面技术,2016,45(9):10-17. 被引量:3

5Xu Wu,Zhi-Meng Guo,Hai-Bin Wang,Xiao-Yan Song.Mechanical properties of WC–Co coatings with different decarburization levels[J].稀有金属:英文版,2014(3):313-317. 被引量:1

6吴杰,王忠华,尚根峰,羊建高,刘芳,吕健.喷雾转换法制备超细晶WC-12Co复合粉末HVOF涂层性能研究[J].稀有金属与硬质合金,2017,45(2):39-44. 被引量:2

7吴杰,吕健,羊建高,刘芳,王忠华,黄柱,任兴润.喷雾转换法制备纳米WC-6Co复合粉的工艺研究[J].稀有金属与硬质合金,2016,44(1):30-34. 被引量:2

1王港,刘秀波,刘一帆,祝杨,欧阳春生,孟元,罗迎社.304不锈钢激光熔覆Co-Ti_(3)SiC_(2)自润滑复合涂层微观组织与摩擦学性能[J].材料工程,2021,49(11):105-115. 被引量:3

2梁伟印,梁国星,董黎君,刘东刚,王时英.YG8硬质合金表面激光熔覆WC/TiC/Co涂层的组织及性能[J].金属热处理,2021,46(12):168-174. 被引量:1

3王志辉,古一,简忠武.真空热处理对HVOF制备的WC-CoCr涂层组织结构和性能的影响[J].材料保护,2022,55(5):1-9.

1韩晓兰,刘战锋.大孔径钛合金管深孔套料钻削技术及应用[J].重型机械,2022(6):48-52.

2韩冰源,高祥涵,杜文博,雷卫宁,李少松,丛孟启,杭卫星,杜伟,朱胜.铝合金基材表面耐磨性能强化研究现状[J].材料导报,2023,37(10):157-164. 被引量:3

3张好强,刘豪,刘印,李强,侯锁霞.激光熔覆制备钴基复合涂层研究现状分析[J].激光与光电子学进展,2023,60(9):80-88.

4黄江,朱志凯,李凯玥,师文庆,吴香林,谢玉萍.304不锈钢表面激光熔覆铁基复合涂层的组织与性能研究[J].应用激光,2023,43(6):29-35.

1郭圣达,余飞,易健宏,郭建锋,陈颢,王文静,羊建高.粉末原料对SPS法制备WC-6Co硬质合金组织性能的影响[J].稀有金属与硬质合金,2019,47(3):79-85. 被引量:4

2郭圣达,鲍瑞,刘亮,杨平,易健宏,羊建高,陈颢.原位合成复合粉制备超细WC-Co硬质合金[J].稀有金属材料与工程,2017,46(12):3977-3982. 被引量:7

3郭圣达,沈韬,鲍瑞,羊建高,易健宏.纳米晶WC-6Co复合粉合成及特性研究(英文)[J].稀有金属材料与工程,2018,47(7):1986-1992. 被引量:2

4刘新新.620℃等级超超临界汽轮机阀杆超音速火焰喷涂研究[J].汽轮机技术,2020,62(5):396-398.

5程鲁.HVOF技术在汽车冷冲模具表面强化上的应用[J].表面工程与再制造,2020,20(3):38-41. 被引量:2

6刘振,贾园,翟云会,赵春宝.表面活性剂促助法制备MoS2及其润滑性能研究[J].中国钼业,2020,44(5):37-40.

7王学政,宋晓瑞,朱春雨,刘成龙,崔家乐.WC-Co耐磨耐腐蚀涂层粉末规模化制备的研究[J].中小企业管理与科技,2020(26):178-179.

8查柏林,贾旭东,王金金,石易昂,苏庆东,张天昊.HVOF喷涂WC-12Co粒子沉积行为分析[J].表面技术,2020,49(11):101-110. 被引量:3

9许家菱,鲍静静,于江怀,罗紫菱,孙立成.湿法烟气脱硫系统中Hg0再释放特性及离子液体脱汞研究[J].华电技术,2020,42(10):41-47.

10隋新坤,尹桂丽,罗佐刚,李宗朋.碳弧堆焊原位合成颗粒增强Fe-05合金涂层的组织、硬度及耐磨性研究[J].热加工工艺,2020,49(20):80-83.

Basic Information:

DOI:

Chinese Library Classification Number:TG174.44[金属学及工艺—金属表面处理]

Citation Information:

WC-Co composite powder prepared by spray conversion was used to prepare WC-Co wear-resis-tant coating by HVOF spraying,and then heat treatment of the coating was performed at 550 ℃,750 ℃ and 950 ℃ in N2 and vacuum atmosphere,respectively.The effects of heat treatment conditions on phase,microstructure,hardness and wear resistance of the coating were studied.The results show that the coating heat-treated in vacuum atmosphere has lower decarburization degree and porosity than the coating heat-treated in N2 atmosphere.The hardness and the wear resistance of the coating can be significantly improve through heat treatment in vacuum atmosphere.The wear rate of the coating heat-treated in vacuum at 750 ℃ can be reduced to 47% of that of the sprayed coating,and its HV0.3 hardness reaches 1 550.

quote

GB/T 7714-2015 [1] WANG Zhong-hua, LIU Yi-qiang, YU Yin-hong, et al. Effect of Heat Treatment Conditions on Properties of WC-Co Coating[J]. Rare Metals and Cemented Carbides, 2020(5): 23-28.
MLA [1] WANG Zhong-hua, et al., "Effect of Heat Treatment Conditions on Properties of WC-Co Coating." Rare Metals and Cemented Carbides, no. 5, 2020, pp. 23-28.
APA [1] WANG Zhong-hua, LIU Yi-qiang, YU Yin-hong, WU Jie, & LU Jian. (2020). Effect of Heat Treatment Conditions on Properties of WC-Co Coating. Rare Metals and Cemented Carbides(5), 23-28.
IEEE [1] WANG Zhong-hua, LIU Yi-qiang, YU Yin-hong, WU Jie, and LU Jian, "Effect of Heat Treatment Conditions on Properties of WC-Co Coating," Rare Metals and Cemented Carbides, no. 5, pp. 23-28, 2020. keywords: {WC-Co;coating;spray conversion;high-velocity oxygen-fuel(HVOF)spraying;heat treatment;atmosphere;temperature}