daohang fenxiangbox searchbox qikanlogonew daohangnew searchboxnew navrightzone footerzone paper

Regulation of the Miscibility of the Active Layer by Random Terpolymer Acceptors to Realize High-Performance All-Polymer Solar Cells AITranslate

Nanchang University; Nanchang University; Nanchang University; Nanchang University; Nanchang University; Jiangxi Normal University
AITranslate
Publisher: ACS
Share Citation Information Add to Favorites

    Scan to share on WeChat or Moments

Use WeChat scan.
Share with WeChat friends or Moments

Abstract AITranslate

The main limitations on the power conversion efficiency (PCE) of all-polymer solar cells (all-PSCs) are the weak absorption coefficients of widely used naphthalene diimide (NDI)-based polymer acceptors and the difficulty of morphology control. Herein, a 3,3′-difluoro-2,2′-bithiophene (2FT) unit is introduced into the NDI-based polymer N2200 by random copolymerization, creating three terpolymer acceptors PNDI-2FT-0.1, PNDI-2FT-0.2, and PNDI-2FT-0.3. Incorporation of 2FT into the backbone is found to significantly improve the absorption coefficients of terpolymers. More importantly, it can be observed that random copolymerization of 2FT into the backbone not only can reduce the strong aggregation of the polymer but also can produce more flexible main chains to favor closer contact and better miscibility with the crystalline donor PBDB-T relative to the N2200 bipolymer. Under the optimal condition, a PBDB-T:PNDI-2FT-0.1-based device achieves a notable PCE of 9.46% with a short-circuit current (JSC) of 16.62 mA cm–2. Note that both the PCE and JSC are the outstanding values in NDI-based all-PSCs. Moreover, the optimized morphology of a bulk heterojunction induced by random terpolymers enables an active layer that has good thickness tolerance. These results demonstrate that the simultaneous regulation of light absorption and miscibility between a donor and an acceptor by random copolymerization is a promising strategy to realize high-performance all-PSCs.

KeyWords AITranslate

random terpolymer acceptors allpolymer solar cell miscibility absorption coefficients high performance
No data

Basic Information:

DOI:https://doi.org/10.1021/acsapm.1c00004

Chinese Library Classification Number:

Citation Information:

The main limitations on the power conversion efficiency (PCE) of all-polymer solar cells (all-PSCs) are the weak absorption coefficients of widely used naphthalene diimide (NDI)-based polymer acceptors and the difficulty of morphology control. Herein, a 3,3′-difluoro-2,2′-bithiophene (2FT) unit is introduced into the NDI-based polymer N2200 by random copolymerization, creating three terpolymer acceptors PNDI-2FT-0.1, PNDI-2FT-0.2, and PNDI-2FT-0.3. Incorporation of 2FT into the backbone is found to significantly improve the absorption coefficients of terpolymers. More importantly, it can be observed that random copolymerization of 2FT into the backbone not only can reduce the strong aggregation of the polymer but also can produce more flexible main chains to favor closer contact and better miscibility with the crystalline donor PBDB-T relative to the N2200 bipolymer. Under the optimal condition, a PBDB-T:PNDI-2FT-0.1-based device achieves a notable PCE of 9.46% with a short-circuit current (JSC) of 16.62 mA cm–2. Note that both the PCE and JSC are the outstanding values in NDI-based all-PSCs. Moreover, the optimized morphology of a bulk heterojunction induced by random terpolymers enables an active layer that has good thickness tolerance. These results demonstrate that the simultaneous regulation of light absorption and miscibility between a donor and an acceptor by random copolymerization is a promising strategy to realize high-performance all-PSCs.

quote

GB/T 7714-2015 [1] Dong Chen, Siqi Liu, Jinliang Liu, et al. ACS Applied Polymer Materials, 2021(3). DOI:10.1021/acsapm.1c00004.
MLA [1] Dong Chen, et al., ACS Applied Polymer Materials, no. 3, 2021, https://doi.org/10.1021/acsapm.1c00004.
APA [1] Dong Chen, Siqi Liu, Jinliang Liu, Jihui Han, Lie Chen, & Yiwang Chen. (2021). ACS Applied Polymer Materials(3). https://doi.org/10.1021/acsapm.1c00004
IEEE [1] Dong Chen, Siqi Liu, Jinliang Liu, Jihui Han, Lie Chen, and Yiwang Chen, ACS Applied Polymer Materials, no. 3, 2021, doi: 10.1021/acsapm.1c00004. keywords: {random terpolymer acceptors;allpolymer solar cell;miscibility;absorption coefficients;high performance}