daohang fenxiangbox searchbox qikanlogonew daohangnew searchboxnew navrightzone footerzone paper

Determination of Al,Cu,Fe,Ni and Si Contents in Nd-Mg Alloy By ICP-AES AITranslate

Hunan Rare Earth Metal Material Research Institute
AITranslate
Publisher: Editorial Office of Rare Metals and Cemented Carbides
Share Citation Information Add to Favorites

    Scan to share on WeChat or Moments

Use WeChat scan.
Share with WeChat friends or Moments

Abstract AITranslate

The contents of A1, Cu, Fe, Ni and Si in Nd-Mg alloy were determined by inductively coupled plasma-atomic emission spectrometry (ICP-AES), and the optimal analytical spectral lines and detection limits of the instrument for the elements were chosen. The relative standard deviation is 2%-5% of the measured values with the above method,and the standard addition recovery is 97.5-105.9%.

KeyWords AITranslate

ICP-AES Nd-Mg alloy impurity content standard addition recovery precision

1张珣.镁合金产业的现状与发展[J].世界有色金属,2002(9):10-13. 被引量:30

2吴伟,盛晓方,邹智厚,王珏,陈立佳,刘正.稀土元素Nd在热挤压AZ61镁合金中的作用[J].沈阳工业大学学报,2007,29(1):24-27. 被引量:8

3成国庆,刘荣丽.电感藕合等离子发射光谱法测定六硼化镧中钨量[J].金属材料与冶金工程,2008,36(2):47-50. 被引量:2

4XB/T614.62011.钆镁合金化学分析方法(第6部分):铝、铜、铁、镍、硅量的测定——电感耦合等离子体原子发射光谱法[S].

5XB/T601.2-2008.六硼化镧化学分析方法(第2部分):铁、钙、镁、铬、锰、铜量的测定一电感耦合等离子体发射光谱法[S].

1周西林,田晓溪,李芬,闫立东,刘守琼.电感耦合等离子体原子发射光谱法测定AZ系列镁合金中磷[J].冶金分析,2014,34(4):61-64. 被引量:1

2于亚辉,张翼明,王东杰,金文莉.硅钼蓝分光光度法测定镁钕合金中硅[J].冶金分析,2016,36(5):49-52. 被引量:6

3刘晓杰,李冀辉,高立红,刘勇俊,刘丽静.硅钼蓝分光光度法测定稀土钢用稀土铁合金中硅量[J].稀土,2021,42(3):102-108. 被引量:1

4张兴梅,刘众宣,杨春晟.ICP-AES法同时测定ZM-6合金中主量及杂质元素的含量[J].兰州大学学报:自然科学版,2022,58(6):824-830. 被引量:1

1杜梅,王东杰,杨学正,刘晓杰.电感耦合等离子体发射光谱法测定稀土金属及其氧化物中的硅量[J].稀土,2022,43(1):119-126. 被引量:1

2刘守琼,王娇娜,周西林.电感耦合等离子体发射光谱法测定镁合金中的硼[J].山东化工,2015,44(15):99-100.

3洪达峰.硅钼蓝分光光度法测定高岭土中二氧化硅[J].冶金分析,2017,37(10):59-64. 被引量:10

4陈晓东,麦丽碧,许洁瑜,肖红新.高压密闭消解-钼蓝分光光度法测定钴铬烤瓷合金中硅[J].中国无机分析化学,2017,7(4):69-72. 被引量:1

5万晓东,赵华,黄辉,李颖,巩琛,冀克俭,李本涛.稀土发火合金的制备方法及表征分析概况[J].山东化工,2017,46(24):63-66.

6白英丽,王佳丽,孙洪涛,张健康.硅钼蓝分光光度法测定高铍铍铝合金中硅[J].冶金分析,2019,39(9):81-85. 被引量:6

7谢文博,李刚,杨峥,张佩佩,叶晓英.电感耦合等离子体发射光谱法测定高纯铝中硅[J].化学分析计量,2020,29(3):30-33. 被引量:4

8李佳,吴文琪,朱悦然,王振江.高频红外吸收法测定稀土铁合金中碳硫[J].金属功能材料,2022,29(6):113-118.

9李娜,李杰.金溶胶基底结合表面拉曼光谱法的重金属检测试验[J].粘接,2023,50(8):138-141.

1陈其凤,史卫梅,姜东,徐耀,吴东,孙予罕.可见光响应的镍硅共掺杂二氧化钛及其光催化性能[J].化学学报,2010,68(4):301-308. 被引量:16

2马荣华,王福平.十一钨镍硅酸盐甘氨酸超分子化合物的合成及性质研究[J].化学试剂,2006,28(11):641-644. 被引量:5

3金献忠,王谦,翁东海,王松青,林力,林振兴.高压消解-ICP-AES法测定燃料油中钒铁镍硅铝钙钠硫[J].分析试验室,2008,27(9):41-45. 被引量:6

4鲁妙勤,王丽萍,杨彬卫.ICP-AES法测定不锈钢中14种元素[J].分析仪器,2013(4):40-44. 被引量:8

5易凤兰,夏新民,邱晓,曾银燕.微波消解电感耦合等离子体原子发射光谱技术测定铁矿石中多种杂质元素[J].涟钢科技与管理,2011(4):27-31. 被引量:1

6石国军,金凯,苏丽君,沈俭一.Ni/SiO_2催化剂的合成及其甘油氢解制1,2-丙二醇性能[J].分子催化,2015,29(5):403-413. 被引量:4

7刘涛,王斐,徐少辉,王连卫.覆镍硅微通道板用于三维超级电容器的研究[J].华东师范大学学报:自然科学版,2012(5):1-9. 被引量:1

8韦刚民,李东海,吴英华.ICP-AES法测定合金钢中Si[J].广东化工,2012,39(15):157-158. 被引量:1

9夏延洋,卜天同,王立成,朱万春,杨胥薇,包强,郝萌萌,程东东,王振旅.镍硅基催化剂上偏三甲苯的加氢脱烷基反应[J].高等学校化学学报,2016,37(12):2215-2220. 被引量:2

10李光俐,徐光,何姣,刘伟,王应进,安中庆.ICP-AES同时测定钴酸锂中13个杂质元素[J].光谱实验室,2009(6):1654-1657. 被引量:10

Basic Information:

DOI:

Chinese Library Classification Number:O657.3[理学—分析化学]

Citation Information:

The contents of A1, Cu, Fe, Ni and Si in Nd-Mg alloy were determined by inductively coupled plasma-atomic emission spectrometry (ICP-AES), and the optimal analytical spectral lines and detection limits of the instrument for the elements were chosen. The relative standard deviation is 2%-5% of the measured values with the above method,and the standard addition recovery is 97.5-105.9%.

quote

GB/T 7714-2015 [1] LIU Rong-li. Determination of Al,Cu,Fe,Ni and Si Contents in Nd-Mg Alloy By ICP-AES[J]. Rare Metals and Cemented Carbides, 2013(5): 43-46.
MLA [1] LIU Rong-li. "Determination of Al,Cu,Fe,Ni and Si Contents in Nd-Mg Alloy By ICP-AES." Rare Metals and Cemented Carbides, no. 5, 2013, pp. 43-46.
APA [1] LIU Rong-li. (2013). Determination of Al,Cu,Fe,Ni and Si Contents in Nd-Mg Alloy By ICP-AES. Rare Metals and Cemented Carbides(5), 43-46.
IEEE [1] LIU Rong-li, "Determination of Al,Cu,Fe,Ni and Si Contents in Nd-Mg Alloy By ICP-AES," Rare Metals and Cemented Carbides, no. 5, pp. 43-46, 2013. keywords: {ICP-AES;Nd-Mg alloy;impurity content;standard addition recovery;precision}