Experimental Study on Cutting Stainless Steel with Different Grain Size Cemented Carbide Tools AITranslate
Abstract AITranslate
The mechanical and physical properties were tested of WC-Co-based cemented carbide with medium,fine and ultra-fine grain size,and the surface morphology of cemented carbide was observed by SEM before and after corrosion.The above three kinds of cemented carbide blades were employed in dry cutting of 0Cr18Ni9 stainless steel.Average wear width on the flank face of cutting blades was measured at different cutting rate,the wear morphology was observed by SEM,and tool wear mechanism was analyzed.The results show that the finer the WC grains,the better the wear resistance and the longer the working life of cemented carbide tools.Adhesive wear is found to be the main wear mechanism of cemented carbide tools during continuous cutting of stainless steel.
KeyWords AITranslate
1韩荣第,于启勋.难加工材料切削加工[M].北京:机械工业出版社,1999.
2侯涛.奥氏体不锈钢铸件的车削加工[J].金属加工：冷加工,2012(18):48-50. 被引量：3
3Saito H, Iwabuchi A, Shimizu T. Effects of Co content and WC grain size on wear of WC cemented carbide[J]. Wear, 2006,261 (2) : 126-132.
4Pirso J, Letunovits S, Viljus M. Friction and wear behav- iour of cemented earbides[J]. Wear, 2004,257 (3-4) : 257 -265.
5Dixon G, Wright R N, Lee M. Processes involved in the wear of cemented carbide tools[J]. Wear, 1985,104 (2) : 157-171.
1郑敏利,孙玉双,陈金国,张为,吴磊,李鹏飞.粘焊变质层对硬质合金刀具前刀面温度分布的影响[J].稀有金属与硬质合金,2017,45(2):81-88.
2罗学全,于涛,温光华,王社权.不同基体硬质合金刀具铣削不锈钢的试验研究[J].稀有金属与硬质合金,2021,49(4):87-93. 被引量：1
3花腾宇,夏鑫,马莉,魏秋平,石鹏程.硬质合金晶粒度对其表面金刚石涂层的影响[J].粉末冶金材料科学与工程,2023,28(2):180-191.
1李文辉,温学杰,李秀红,张演.整体叶盘抛磨技术研究现状及其发展趋势[J].航空制造技术,2022,65(17):88-102.
1吴桂秀,郝新,高峰,曹建洲.铈对45Cr2NiMoVSi热作模具钢组织和耐磨性的影响[J].热加工工艺,2009,38(16):29-31. 被引量：2
2窦云巍,寇自力,亓磊,贺端威.PcBN刀具连续车削淬硬钢性能的研究[J].金刚石与磨料磨具工程,2010,30(6):54-57. 被引量：3
3冯书华.J31-400型压力机横梁传动轴的修复[J].设备管理与维修,1993(9):12-12.
4从善海.矿用牙轮钻头55SiMoV滚柱的热处理及耐磨性能[J].矿山机械,2009,37(23):10-13. 被引量：1
5邱新义,李鹏南,唐思文,杨进.切削速度和刀具磨损对锯齿形切屑形成的影响[J].机械设计,2015,32(12):64-67. 被引量：5
6魏勇强,王黎钦.20CrNiMo钢在冲击滑动耦合作用下的磨损特性研究[J].摩擦学学报,2008,28(3):260-265. 被引量：5
Basic Information:
DOI：
Chinese Library Classification Number:TG135.5[一般工业技术—材料科学与工程]
Citation Information:
The mechanical and physical properties were tested of WC-Co-based cemented carbide with medium,fine and ultra-fine grain size,and the surface morphology of cemented carbide was observed by SEM before and after corrosion.The above three kinds of cemented carbide blades were employed in dry cutting of 0Cr18Ni9 stainless steel.Average wear width on the flank face of cutting blades was measured at different cutting rate,the wear morphology was observed by SEM,and tool wear mechanism was analyzed.The results show that the finer the WC grains,the better the wear resistance and the longer the working life of cemented carbide tools.Adhesive wear is found to be the main wear mechanism of cemented carbide tools during continuous cutting of stainless steel.
quote
| GB/T 7714-2015 | [1] ZHANG Hao-qiang, PANG Si-qin, WANG Xi-bin, et al. Experimental Study on Cutting Stainless Steel with Different Grain Size Cemented Carbide Tools[J]. Rare Metals and Cemented Carbides, 2016(2): 76-80. |
| MLA | [1] ZHANG Hao-qiang, et al., "Experimental Study on Cutting Stainless Steel with Different Grain Size Cemented Carbide Tools." Rare Metals and Cemented Carbides, no. 2, 2016, pp. 76-80. |
| APA | [1] ZHANG Hao-qiang, PANG Si-qin, WANG Xi-bin, CHENG Jian-bing, & LI Shen-wang. (2016). Experimental Study on Cutting Stainless Steel with Different Grain Size Cemented Carbide Tools. Rare Metals and Cemented Carbides(2), 76-80. |
| IEEE | [1] ZHANG Hao-qiang, PANG Si-qin, WANG Xi-bin, CHENG Jian-bing, and LI Shen-wang, "Experimental Study on Cutting Stainless Steel with Different Grain Size Cemented Carbide Tools," Rare Metals and Cemented Carbides, no. 2, pp. 76-80, 2016. keywords: {cemented carbide;WC grain;grain size;tool wear;mechanical property;stainless steel;cutting machining} |