Research on Preparation and Performance of Al Coating Deposited on Sintered NdFeB Permanent Magnet by Magnetron Sputtering AITranslate
Abstract AITranslate
Pure Al coating was deposited on NdFeB magnet by direct current(DC)magnetron sputtering.The influences of sputtering power and substrate temperature on microstructure and corrosion resistance of Al coating were investigated.The surface morphology of Al coating was characterized by scanning electron microscopy(SEM).The adhesion strength between Al coating and NdFeB substrate was characterized by vertical tensile test.The corrosion resistance was investigated by potentiodynamic polarization curves and neutral salt spray(NSS)test.The results indicate that the lower the sputtering power,the higher the substrate temperature,and the better the properties of Al coating.Al coating deposited at 2.0 kW sputtering power and 300 ℃ substrate temperature has smooth surface and fine and compact grains,and its adhesion strength to the substrate reaches 25.13 MPa.Furthermore,the above coating has the optimal corrosion resistance,and it is still intact with a little pitting on surface after 6 d NSS test.
KeyWords AITranslate
1李卫,朱明刚.高性能金属永磁材料的探索和研究进展[J].中国材料进展,2009,28(9):62-73. 被引量:22
2GURAPPA I. Corrosion characteristics of permanent m- agnets in acidic environments[J]. Journal of Alloys and Compounds, 2003,360 (1/2) : 236-242.
3SUEPTITZ R, TSCHULIK K, UHLEMANN M, et al. Effect of magnetization state on the corrosion behaviour of NdFeB permanent magnets [J]. Corrosion Science, 2011,53(9) :2 843-2 852.
4El-AZIZ A M. Corrosion resistance of Nd-Fe-B perma- nent magnetic alloys (Part l) : Role of alloying elements [J]. Materials and Corrosion, 2003,54 (2) : 88-92.
5YU L Q,WEN Y H,YAN M. Effects of Dy and Nb on the magnetic properties and corrosion resistance of sin- tered NdFeB[J]. Journal of Magnetic and Magnetic Ma- terials, 2004,283 (2/3) : 353-356.
6ZHENG Jingwu,CHEN Haibo, QIAO Liang, et al. Dou- ble coating protection of Nd-Fe-B magnets: Intergranu- lar phosphating treatment and copperplating[J]. Journal of Magnetism and Magnetic Materials, 2014,371 : 1-4.
7CHEN Jing, XU Bajin, LING Guoping. Amorphous Al- Mn coating on NdFeB magnets: Electrodeposition from AlCla-EMIC-MnCl2 ionic liquid and its corrosion behav- ior[J]. Materials Chemistry and Physics, 2012,134 (2/ 3) :1 067-1 071.
8张蕾,景璀.钕铁硼永磁材料电镀锌镍合金工艺[J].电子工艺技术,2009,30(4):230-232. 被引量:6
9许伟,代明江,胡芳.NdFeB永磁体表面磁控溅射铝防护镀层性能研究[J].表面技术,2014,43(1):77-80. 被引量:10
10胡芳,代明江,林松盛,侯惠君,石倩,赵利.循环氩离子轰击对磁控溅射铝膜结构和性能的影响[J].中国表面工程,2015,28(1):49-55. 被引量:10
1陈小龙,马杰,戎茂华,王江.添加La对NdFeB微观组织结构及快淬薄带磁性能的影响[J].稀有金属与硬质合金,2018,46(2):16-20. 被引量:3
1许磊,柯庆进,李莎,戎茂华,王江.La-Fe-B合金的微观组织及物相转变研究[J].稀有金属与硬质合金,2020(1):31-34. 被引量:2
2张佳彬,李莎,程祥,戎茂华,王江.Pr-Fe-B合金的相转变及微观组织研究[J].稀有金属与硬质合金,2020,48(4):37-41.
3刘春,高励珍,张翼明,刘晓杰.电感耦合等离子体发射光谱法测定镨钕钆合金中稀土杂质量[J].金属功能材料,2021,28(4):59-63. 被引量:2
1徐吉林,黄政贤,罗军明,钟震晨.烧结NdFeB永磁体在不同酸溶液中的腐蚀行为(英文)[J].稀有金属材料与工程,2015,44(4):786-790. 被引量:7
2伊晨晖,常保华,都东,张骅,李艺红.NdFeB永磁体与SPCC钢激光点焊的显微组织特征研究[J].焊接,2014(4):27-30.
3赵刚,张甲英,孙椰望.再制造热喷涂涂层切削加工的研究现状[J].机床与液压,2014,42(23):180-184. 被引量:1
4刘金刚,王胜民,赵晓军,何明奕,谭蓉,黄国雄.无铵助镀条件下热浸镀Zn-0.05%Al合金镀层的组织结构[J].金属热处理,2017,42(3):29-34.
5胡金星,李智,刘永雄,赵满秀,尹付成.Si含量对热浸镀Zn-15% Al层组织的影响[J].材料保护,2013,46(11):9-12. 被引量:4
6林万舟,李向阳.烧结NdFeB永磁体耐蚀涂层的研究进展[J].腐蚀与防护,2009,30(1):22-24. 被引量:1
7谢东华,张鹏程,张羽廷,王庆富,刘婷婷.热等静压处理对U/Al镀层界面特性的影响[J].腐蚀科学与防护技术,2009,21(5):456-459. 被引量:2
8岳晓岱,王效光.烧结NdFeB永磁体的热浸镀铝工艺研究[J].失效分析与预防,2010,5(2):82-84.
9童晨,苏旭平,王建华,吴长军.Mg对Zn-6%Al镀层凝固组织的影响及耐腐蚀性的研究[J].热加工工艺,2012,41(12):99-103. 被引量:18
10于升学,陈玲.烧结型NdFeB永磁体锌铬膜处理工艺及性能研究[J].中国稀土学报,2006,24(1):65-69. 被引量:5
Basic Information:
DOI:
Chinese Library Classification Number:TG174.444[金属学及工艺—金属表面处理]
Citation Information:
Pure Al coating was deposited on NdFeB magnet by direct current(DC)magnetron sputtering.The influences of sputtering power and substrate temperature on microstructure and corrosion resistance of Al coating were investigated.The surface morphology of Al coating was characterized by scanning electron microscopy(SEM).The adhesion strength between Al coating and NdFeB substrate was characterized by vertical tensile test.The corrosion resistance was investigated by potentiodynamic polarization curves and neutral salt spray(NSS)test.The results indicate that the lower the sputtering power,the higher the substrate temperature,and the better the properties of Al coating.Al coating deposited at 2.0 kW sputtering power and 300 ℃ substrate temperature has smooth surface and fine and compact grains,and its adhesion strength to the substrate reaches 25.13 MPa.Furthermore,the above coating has the optimal corrosion resistance,and it is still intact with a little pitting on surface after 6 d NSS test.
quote
| GB/T 7714-2015 | [1] LI Hong-ying, HAO Zhuang-zhi, LIU Yu-hui, et al. Research on Preparation and Performance of Al Coating Deposited on Sintered NdFeB Permanent Magnet by Magnetron Sputtering[J]. Rare Metals and Cemented Carbides, 2016(5): 48-54. |
| MLA | [1] LI Hong-ying, et al., "Research on Preparation and Performance of Al Coating Deposited on Sintered NdFeB Permanent Magnet by Magnetron Sputtering." Rare Metals and Cemented Carbides, no. 5, 2016, pp. 48-54. |
| APA | [1] LI Hong-ying, HAO Zhuang-zhi, LIU Yu-hui, ZHU Wang-wei, & CHEN Yun-zhi. (2016). Research on Preparation and Performance of Al Coating Deposited on Sintered NdFeB Permanent Magnet by Magnetron Sputtering. Rare Metals and Cemented Carbides(5), 48-54. |
| IEEE | [1] LI Hong-ying, HAO Zhuang-zhi, LIU Yu-hui, ZHU Wang-wei, and CHEN Yun-zhi, "Research on Preparation and Performance of Al Coating Deposited on Sintered NdFeB Permanent Magnet by Magnetron Sputtering," Rare Metals and Cemented Carbides, no. 5, pp. 48-54, 2016. keywords: {sintered NdFeB permanent magnet;aluminum coating;magnetron sputtering;adhesion strength;corrosion resistance} |
