daohang fenxiangbox searchbox qikanlogonew daohangnew searchboxnew navrightzone footerzone paper

Study on Effect of Ce on the Thermoplasticity of Copper-containing Arsenic Steel AITranslate

General Iron and Steel Research Institute;General Iron and Steel Research Institute;General Iron and Steel Research Institute;General Iron and Steel Research Institute;General Iron and Steel Research Institute
AITranslate
Publisher: Editorial Office of Rare Metals and Cemented Carbides
Share Citation Information Add to Favorites

    Scan to share on WeChat or Moments

Use WeChat scan.
Share with WeChat friends or Moments

Abstract AITranslate

The effect of Ce on improving the thermoplasticity of copper-containing arsenic steel was investigated by Gleeble—3800 thermal/force simulation test machine.The results of thermoplastic curve analysis and fracture and microstructure observation show that adding 0.005 8% Ce can reduce the temperature range of the thermoplastic groove of copper-containing arsenic steel, and improve the thermoplasticity of the steel at 957~1 100 ℃ to a certain extent.The addition of 0.005 8%Ce can reduce the temperature to 1 000 ℃ at which the hot tensile fracture of copper-containing arsenic steel is completely transformed into dimple fracture, and at the same time, the temperature at which copper-containing arsenic steel enters the austenite single-phase region can be reduced to 800 ℃.There are no arsenious rare earth inclusions in the copper-containing arsenic steel with 0.005 8%Ce, while the solid solution Ce in the steel segregates prefe-rentially at the grain boundary, reducing the As content at the grain boundary, and thereby improving the thermoplasticity of copper-containing arsenic steel.

KeyWords AITranslate

Ce addition copper-containing arsenic steel thermoplasticity fracture inclusion grain boundary segregation

1陆明希,张浩.国内电炉钢发展现状与应用前景[J].再生资源与循环经济,2012,5(1):37-39. 被引量:4

2李士琦,陈煜,刘润藻,季淑娟.现代电弧炉炼钢技术进展[J].中国冶金,2005,15(6):8-13. 被引量:13

3张胤彦.残余元素对工艺及性能的影响[J].中国金属通报,2021(7):247-248. 被引量:1

4王绚,唐雪萍,杨接明,雷旻.钢中主要杂质元素的特性及影响[J].特钢技术,2011,17(1):13-15. 被引量:17

5贺景春,弓文生,任新建.钢中残余有害元素的影响及其控制[J].包钢科技,2007,33(S2):1-4. 被引量:13

6罗林根,王建军,彭家庆,林银河,陈正宗,李正邦.钢中残余元素铜的去除方法研究现状[J].铸造技术,2015,36(6):1490-1494. 被引量:2

7杜显彬,魏泽华,杜传治,赵培林,方金林.残余元素砷、铜对耐低温热轧型钢表面质量的影响[J].连铸,2017,42(3):34-38. 被引量:6

1曾重阳,黄宏锋,陈元,姜迈,韦莉莉,刘淑辉.室温多向模锻道次对Al-5Mg-0.3Mn合金组织与性能的影响[J].锻压技术,2022,47(5):5-11.

2习小慧,陈柏潼,刘永乐,彭晓柏,王金亮.塑性变形与调质处理耦合作用对40Cr钢锭焊接接头疲劳性能的影响研究[J].广州化工,2022,50(13):156-158. 被引量:2

3马钰,唐海燕,刘颜彬,刘锦文,江野,张家泉.稀土铈对55SiCr高应力弹簧钢夹杂物的改性作用[J].钢铁,2022,57(6):57-71. 被引量:6

4刘明,白佳,王鲁,房璐璐,丁乔峰.某火电机组三连杆恒力弹簧支吊架弹簧拉杆断裂原因[J].机械工程材料,2022,46(3):89-94. 被引量:2

5马江,王峰,薛永盛,李勇.某Q345R钢制压力容器超声测厚异常原因[J].理化检验:物理分册,2022,58(3):31-32.

6梁燕燕,刘少先,杨冬冬.某热镀纯锌卷大锌花和发亮缺陷产生原因及改善措施[J].理化检验:物理分册,2022,58(3):75-78.

7许永春,周杰,沈鹏,孙晓军,张钦莹,朱鹏飞.TC4钛合金高锁螺栓发生异常双剪断裂原因[J].理化检验:物理分册,2022,58(3):66-69.

8汪勇,姜亚雄,郑仁军,刘志斌,高起方,庄世明,王德毛.某高砷微细粒难处理金矿石选冶试验研究[J].黄金,2022,43(7):60-66. 被引量:1

9王之香,南海,张锦文.国产高铁齿轮用材料的韧脆转变温度研究[J].山西冶金,2022,45(3):1-3.

10张特,马绍斌.氧化锌烟尘浸出液加压氧化中和脱砷试验研究[J].有色设备,2022,36(3):23-26.

Basic Information:

DOI:

Chinese Library Classification Number:TG142.33[金属学及工艺—金属材料]

Citation Information:

The effect of Ce on improving the thermoplasticity of copper-containing arsenic steel was investigated by Gleeble—3800 thermal/force simulation test machine.The results of thermoplastic curve analysis and fracture and microstructure observation show that adding 0.005 8% Ce can reduce the temperature range of the thermoplastic groove of copper-containing arsenic steel, and improve the thermoplasticity of the steel at 957~1 100 ℃ to a certain extent.The addition of 0.005 8%Ce can reduce the temperature to 1 000 ℃ at which the hot tensile fracture of copper-containing arsenic steel is completely transformed into dimple fracture, and at the same time, the temperature at which copper-containing arsenic steel enters the austenite single-phase region can be reduced to 800 ℃.There are no arsenious rare earth inclusions in the copper-containing arsenic steel with 0.005 8%Ce, while the solid solution Ce in the steel segregates prefe-rentially at the grain boundary, reducing the As content at the grain boundary, and thereby improving the thermoplasticity of copper-containing arsenic steel.

quote

GB/T 7714-2015 [1] CAO Cheng-xiang, LIANG Yu-yu, XIN Wen-bin, et al. Study on Effect of Ce on the Thermoplasticity of Copper-containing Arsenic Steel[J]. Rare Metals and Cemented Carbides, 2022(3): 52-56.
MLA [1] CAO Cheng-xiang, et al., "Study on Effect of Ce on the Thermoplasticity of Copper-containing Arsenic Steel." Rare Metals and Cemented Carbides, no. 3, 2022, pp. 52-56.
APA [1] CAO Cheng-xiang, LIANG Yu-yu, XIN Wen-bin, ZHANG Jing, & MENG Qin-yang. (2022). Study on Effect of Ce on the Thermoplasticity of Copper-containing Arsenic Steel. Rare Metals and Cemented Carbides(3), 52-56.
IEEE [1] CAO Cheng-xiang, LIANG Yu-yu, XIN Wen-bin, ZHANG Jing, and MENG Qin-yang, "Study on Effect of Ce on the Thermoplasticity of Copper-containing Arsenic Steel," Rare Metals and Cemented Carbides, no. 3, pp. 52-56, 2022. keywords: {Ce addition;copper-containing arsenic steel;thermoplasticity;fracture;inclusion;grain boundary segregation}