daohang fenxiangbox searchbox qikanlogonew daohangnew searchboxnew navrightzone footerzone paper

Effects of Ni Addition on the Microstructure and Electrochemical Corrosion Property of AlFeCoCrCuNi_x High-entropy Alloys AITranslate

Keylin University of Electronic Science and Technology's Information Materials Key Laboratory;Keylin University of Electronic Science and Technology's Information Materials Key Laboratory;Keylin University of Electronic Science and Technology's Information Materials Key Laboratory
AITranslate
Publisher: Editorial Office of Rare Metals and Cemented Carbides
Share Citation Information Add to Favorites

    Scan to share on WeChat or Moments

Use WeChat scan.
Share with WeChat friends or Moments

Abstract AITranslate

The influences were investigated of different amounts of Ni element on the microstructure and electrochemical corrosion property of AlFeCoCrCuNix(x=0,0.25,0.5,1)high-entropy alloys by XRD,SEM,EDS and electrochemical polarization curves.The results show that all the alloys exhibit dendritic microstructure with composition segregation,and Cu element is enriched in interdendritic boundaries.Adding a small amount of Ni element results in the formation of granular Al-Ni new phase.With the increase of Ni content,the granular Al-Ni new phase develops into a massive phase distributed between Curich boundary and dendrite.Furthermore,the addition of Ni element improves the corrosion resistance of AlFeCoCrCuNix(x=0,0.25,0.5,1)alloy in 3.5% NaCl solution.And AlFeCoCrCuNi0.5alloy exhibits the optimal corrosion resistance.

KeyWords AITranslate

high-entropy alloy AlFeCoCrCuNix microstructure electrochemical corrosion property polarization curve

1F.J. Wang,Y. Zhang.Effect of Co addition on crystal structure and mechanical properties of Ti 0.5 CrFeNiAlCo high entropy alloy[J]. Materials Science & Engineering A . 2008 (1)

2T.K. Chen,T.T. Shun,J.W. Yeh,M.S. Wong.Nanostructured nitride films of multi-element high-entropy alloys by reactive DC sputtering[J]. Surface & Coatings Technology . 2004

3Huang, Ping-Kang,Yeh, Jien-Wei,Shun, Tao-Tsung,Chen, Swe-Kai.Multi-principal-element alloys with improved oxidation and wear resistance for thermal spray coating. Advanced Engineering Materials . 2004

4Ke, Guan-Yu,Chen, Swe-Kai,Hsu, Tung,Yeh, Jien-Wei.FCC and BCC equivalents in as-cast solid solutions of Al x Co y Cr z Cu 0.5 Fe v Ni w high-entropy alloys. Annales de Chimie: Science des Materiaux . 2006

5Yeh, Jien-Wei,Chen, Swe-Kai,Lin, Su-Jien,Gan, Jon-Yiew,Chin, Tsung-Shune,Shun, Tao-Tsung,Tsau, Chun-Huei,Chang, Shou-Yi.Nanostructured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes. Advanced Engineering Materials . 2004

1宋志伟,赵永好,伍冠中,高旭州.FeNi_2CoMo_(0.2)V_(0.5)高熵合金在2% HNO_3溶液中的电化学性能[J].中国锰业,2017,35(2):105-107.

2钟永录,董应虎,张瑞卿,王昆昆,方俊晓,孙文.主元对高熵合金组织及性能影响的研究综述[J].热加工工艺,2019,48(12):6-8. 被引量:2

3赵海朝,梁秀兵,乔玉林,柳建,胡振峰,陈永雄,张志彬.低密度高熵合金的研究进展[J].航空材料学报,2019,39(5):61-81. 被引量:8

4鲍亚运,纪秀林,姬翠翠,赵建华,程江波,徐霖.激光熔覆FeCrNiCoCuAl_x高熵合金涂层的耐腐蚀与抗冲蚀性能[J].材料工程,2019,47(11):141-147. 被引量:21

5龙琼,胡素丽,黎应芬,李娟,龙绍檑.高熵合金耐蚀性研究的现状及最新进展[J].电镀与涂饰,2020,39(4):231-240. 被引量:5

6吴韬,段佳伟,陈小明,俞立涛,陈云祥,石淑琴.合金元素对激光熔覆高熵合金涂层影响的研究进展[J].材料导报,2020,34(S01):413-419. 被引量:9

7刘楚,刘万辉,黄俊春,宋玖旭.FeCrAlCu系熔覆层的组织和性能研究[J].热加工工艺,2021,50(6):102-105.

8冯力,胡昱轩,李文生,王贵平,王军.冷喷涂辅助原位合成CuFeCrAlNiTi高熵合金涂层的组织性能研究[J].表面技术,2021,50(7):194-202. 被引量:5

9周子钧,姜芙林,宋鹏芳,杨发展,王玉玲,杨勇,梁鹏.激光熔覆高熵合金涂层的耐腐蚀性能研究进展[J].表面技术,2021,50(12):257-270. 被引量:8

1卢煜,李春燕,田霖,翟建树,寇生中.高熵合金的性能研究进展[J].稀有金属,2022,46(10):1352-1364. 被引量:1

2张华,张岩,吴畏.浅谈家用电器零部件盐雾试验标准的一些误区——以电镀件、螺钉为例[J].家电科技,2022(S01):748-750.

3周鹏远,刘洪喜,张晓伟,郝轩弘,王悦怡,陈林.轻质高熵合金的研究进展[J].中国表面工程,2021,34(2):13-24. 被引量:4

4贾岳飞,王刚,贾延东,伍诗伟,穆永坤,徐龙,张靓博,徐立明.轻质高熵合金研究现状[J].材料导报,2020,34(17):17003-17017. 被引量:6

5龙琼,胡素丽,李娟,伍剑明,黎应芬,伍玉娇.提高镁合金耐蚀性的最新研究进展[J].电镀与涂饰,2020,39(15):1047-1052. 被引量:3

6田松涛.激光熔覆高熵合金涂层的研究现状及存在的问题[J].信息记录材料,2020,21(8):26-27. 被引量:1

7孙博,夏铭,张志彬,梁秀兵,沈宝龙.难熔高熵合金性能调控与增材制造[J].材料工程,2020,48(10):1-16. 被引量:8

8郝文俊,孙荣禄,牛伟,谭金花,李小龙.合金元素影响高熵合金涂层组织及力学性能综述[J].材料导报,2020,34(S02):330-333. 被引量:4

9陈浩,余兴建,谭震,王瑞强,张风如.高湿高盐雾环境下双光激光除锈装置抗腐蚀性能分析[J].合成材料老化与应用,2021,50(1):91-94.

10李工,戴凤祥,张翼飞,刘庆琦,范笑锋.Al系高熵合金高温氧化性能研究进展[J].燕山大学学报,2021,45(3):189-201. 被引量:6

1俞翔栋,董达善,黄婉娟.基于SYSWELD的Q690高强钢焊接数值模拟[J].热加工工艺,2014,43(19):201-204. 被引量:3

2付三玲,李全安,井晓天,陈君.热处理对Mg-12Gd-3Y-Sm-0.5Zr合金组织和性能的影响[J].材料热处理学报,2014,35(5):44-48. 被引量:19

3叶杰,林小娉,董允,方杰,王丽.Mg-4Zn-2Al-0.5Ca合金时效沉淀过程的相演变[J].材料热处理学报,2012,33(4):22-26.

4张克军,胡显太.热轧带肋钢筋碎裂原因分析[J].四川冶金,1996,18(3):44-45.

5赵强,张元华,张银海,李化芳.含铋黄铜的组织和性能研究[J].热加工工艺,2012,41(12):61-64.

6周学华,张娅,卫中领,徐乃欣,陈秋荣.添加稀土元素对AZ91D镁合金腐蚀性能的影响[J].腐蚀科学与防护技术,2009,21(2):85-87. 被引量:11

7范念青,王荣山,刘向兵,钱王洁,夏志新,刘雍.P92钢析出相演变的热电势变化规律[J].金属热处理,2015,40(5):173-176. 被引量:4

8王辅忠,李荣华.高密度钨合金中的沉淀相和强化研究[J].兵器材料科学与工程,2003,26(1):69-72.

9石国梁,张丁非,赵霞兵,张奎,李兴刚,李永军,马鸣龙.Mg-6wt%Zn-1wt%Mn合金中的析出相演变(英文)[J].稀有金属材料与工程,2013,42(12):2447-2452. 被引量:3

10杨莉,王仓.双相钢S31803埋弧焊焊接接头组织和性能测试分析[J].热加工工艺,2010,39(13):158-160. 被引量:9

Basic Information:

DOI:

Chinese Library Classification Number:TG139[一般工业技术—材料科学与工程]

Citation Information:

The influences were investigated of different amounts of Ni element on the microstructure and electrochemical corrosion property of AlFeCoCrCuNix(x=0,0.25,0.5,1)high-entropy alloys by XRD,SEM,EDS and electrochemical polarization curves.The results show that all the alloys exhibit dendritic microstructure with composition segregation,and Cu element is enriched in interdendritic boundaries.Adding a small amount of Ni element results in the formation of granular Al-Ni new phase.With the increase of Ni content,the granular Al-Ni new phase develops into a massive phase distributed between Curich boundary and dendrite.Furthermore,the addition of Ni element improves the corrosion resistance of AlFeCoCrCuNix(x=0,0.25,0.5,1)alloy in 3.5% NaCl solution.And AlFeCoCrCuNi0.5alloy exhibits the optimal corrosion resistance.

quote

GB/T 7714-2015 [1] LIU De-piao, LIU Gui-zhong, GUO Jing-jie. Effects of Ni Addition on the Microstructure and Electrochemical Corrosion Property of AlFeCoCrCuNi_x High-entropy Alloys[J]. Rare Metals and Cemented Carbides, 2015(5): 49-53 74.
MLA [1] LIU De-piao, et al., "Effects of Ni Addition on the Microstructure and Electrochemical Corrosion Property of AlFeCoCrCuNi_x High-entropy Alloys." Rare Metals and Cemented Carbides, no. 5, 2015, pp. 49-53 74.
APA [1] LIU De-piao, LIU Gui-zhong, & GUO Jing-jie. (2015). Effects of Ni Addition on the Microstructure and Electrochemical Corrosion Property of AlFeCoCrCuNi_x High-entropy Alloys. Rare Metals and Cemented Carbides(5), 49-53 74.
IEEE [1] LIU De-piao, LIU Gui-zhong, and GUO Jing-jie, "Effects of Ni Addition on the Microstructure and Electrochemical Corrosion Property of AlFeCoCrCuNi_x High-entropy Alloys," Rare Metals and Cemented Carbides, no. 5, pp. 49-53 74, 2015. keywords: {high-entropy alloy;AlFeCoCrCuNix;microstructure;electrochemical corrosion property;polarization curve}