Study of Non-homogeneous Hard Alloys and Its Application in Hard-rock Drilling Tools AITranslate
Abstract AITranslate
Based on the average WC particle size and distribution in the powder and alloy, according to alloy's WC subcrystalline size, microstrain and Co-phase distribution, study is made of the influence of we particle size compositions and Co phase distribution on the physical mechanical properties of mining cemented carbides. The cemented carbides with a combination of non-homogeneous Co-phase and non-homogeneous hard phase has been satisfactorily used for hard-rock drilling tools.
KeyWords AITranslate
1陈绍衣,张俊熙,周书助.碳化钨粗细颗粒搭配对WC—10%Co合金力学性能与组织结构的影响[J].硬质合金,1994,11(3):138-143. 被引量：15
1郑清宏,刘江,时凯华,黄伟.粗细WC晶粒配比对双晶结构硬质合金力学性能与组织结构的影响[J].稀有金属与硬质合金,2020(1):75-79. 被引量：4
2吴建国.焊接球齿钎头用硬质合金KK30牌号的研制[J].凿岩机械气动工具,2011,37(4):21-23.
3石丽秋,王晓灵,熊超伟.球磨时间对双晶结构的WC-TiC-Co/Ni硬质合金组织及性能的影响[J].硬质合金,2015,32(3):155-163. 被引量：4
4王晓灵,熊超伟.WC碳含量对WC-TiC-(Co,Ni)硬质合金组织及性能的影响[J].四川冶金,2015,37(4):48-54. 被引量：3
5罗海辉,彭鑫,谢晨辉.双晶硬质合金WC晶粒分布特征的研究[J].硬质合金,2015,32(5):285-293. 被引量：5
6晏平,王明胜.高性能高气压潜孔钻齿产品开发[J].凿岩机械气动工具,2016,42(1):36-40.
7梁瑜,陈玉柏,汤昌仁,欧立明,徐伟.硬岩掘进用混晶结构硬质合金制备新工艺及应用研究[J].中国钨业,2020,35(6):50-57.
8卢晓江.JZ06牌号合金的研制[J].稀有金属与硬质合金,2002,30(4):21-24.
1谢晨辉,谭立群,彭宇,周华堂.硬质合金的非常规检测技术[J].硬质合金,2018,35(6):390-402. 被引量：2
2肖逸锋,周年丰,匡雯慧,吴靓,许艳飞,钱锦文,贺跃辉.硬质相成分对WC-TiC钢结硬质合金组织及力学性能的影响[J].材料热处理学报,2017,38(6):42-48. 被引量：1
3蒙世合,罗海辉,彭宇.WC晶粒离散度对WC-Co硬质合金断裂韧性的影响[J].硬质合金,2017,34(1):14-20. 被引量：11
4柯鑫,王兴庆.WC含量对TiC-Ni-Mo系硬质合金组织与性能的影响[J].上海金属,2018,40(2):64-68. 被引量：3
5郭圣达,余飞,易健宏,郭建锋,陈颢,王文静,羊建高.粉末原料对SPS法制备WC-6Co硬质合金组织性能的影响[J].稀有金属与硬质合金,2019,47(3):79-85. 被引量：4
6罗任,熊慧文,陈楠,李志友.碳含量对WC-TiC-Co合金组织与性能的影响[J].粉末冶金材料科学与工程,2020,25(5):381-388. 被引量：2
7唐炜,杨树忠,张帆,欧立明,肖颖奕,汤昌仁,郭永忠.团粒粒径组成对网状合金组织结构及物理/力学性能的影响[J].中国钨业,2020,35(6):39-49. 被引量：1
8梁瑜,陈玉柏,汤昌仁,欧立明,徐伟.硬岩掘进用混晶结构硬质合金制备新工艺及应用研究[J].中国钨业,2020,35(6):50-57.
9徐伟,陈玉柏,汤昌仁,胡梦云,梁瑜.高性能非均匀结构硬质合金的制备及其形成机理研究[J].中国钨业,2021,36(1):48-54. 被引量：2
10孔德方,金鹏,管玉明,龙坚战,罗海辉,刘斌,赵玉玲,张卫兵.WC-10%Co细晶硬质合金晶粒夹粗的模拟研究[J].硬质合金,2021,38(2):88-95. 被引量：4
1徐刚,陈国才.硬岩掘进掏槽方式及参数优化研究及应用[J].煤炭工程,2014,46(12):45-46. 被引量：4
2张海峰,马丛林.硬岩巷道高效综掘的保障措施及效益分析[J].煤矿支护,2012(1):43-45.
3刘智勇,李启厚,刘志宏,杨天足,姜波,李玉虎.硅酸镍在氨-硫酸铵-水溶液中的溶解机理[J].中南大学学报：自然科学版,2013,44(7):2669-2674. 被引量：1
4王志丹.硬岩掘进机在大倾角岩巷的应用[J].中小企业管理与科技,2012(31):74-74. 被引量：1
5刘荣湘,易凯华.镍代钴矿用硬质合金的新进展[J].稀有金属与硬质合金,1994,22(2):46-49. 被引量：6
6孙茂来,孙健.煤矿硬岩掘进中爆破参数的优选实践[J].河北能源职业技术学院学报,2012,12(1):47-48. 被引量：2
7张俊熙,王和斌.用电溶法回收的碳化钨制取的矿用硬质合金的特性及其使用效果[J].硬质合金,1993,10(3):133-142. 被引量：1
8邓雪峰.底部复式楔形掏槽中深孔爆破技术在硬岩掘进中的应用[J].中国科技博览,2011(35):102-102.
9刘承明,王宾.马坑铁矿平巷硬岩中深孔爆破技术改进[J].有色金属：矿山部分,2012,64(3):68-71. 被引量：5
10陈辉,郭超,王汗斌.义安矿大采深底板预抽瓦斯巷掘进技术研究[J].山东煤炭科技,2015,33(1):109-111.
Basic Information:
DOI：
Chinese Library Classification Number:TF125.3[冶金工程—粉末冶金];TD421.5[矿业工程—矿山机电]
Citation Information:
Based on the average WC particle size and distribution in the powder and alloy, according to alloy's WC subcrystalline size, microstrain and Co-phase distribution, study is made of the influence of we particle size compositions and Co phase distribution on the physical mechanical properties of mining cemented carbides. The cemented carbides with a combination of non-homogeneous Co-phase and non-homogeneous hard phase has been satisfactorily used for hard-rock drilling tools.
quote
| GB/T 7714-2015 | [1] ZHOU Shu-zhu. Study of Non-homogeneous Hard Alloys and Its Application in Hard-rock Drilling Tools[J]. Rare Metals and Cemented Carbides, 1998(4): 15-20. |
| MLA | [1] ZHOU Shu-zhu. "Study of Non-homogeneous Hard Alloys and Its Application in Hard-rock Drilling Tools." Rare Metals and Cemented Carbides, no. 4, 1998, pp. 15-20. |
| APA | [1] ZHOU Shu-zhu. (1998). Study of Non-homogeneous Hard Alloys and Its Application in Hard-rock Drilling Tools. Rare Metals and Cemented Carbides(4), 15-20. |
| IEEE | [1] ZHOU Shu-zhu, "Study of Non-homogeneous Hard Alloys and Its Application in Hard-rock Drilling Tools," Rare Metals and Cemented Carbides, no. 4, pp. 15-20, 1998. keywords: {combination of rough/fine WC powder, Co-phase distribution, non-homogeneous Co-phase and hard phase cemented carbide} |